Australian Railway Stations

[kamnet]

Worked for me when I tested it just a few minutes ago to make sure I was right. You can set it to any value that you want, as long as nobody is running a client with that value as a version name/number, it's not going to show up in the game.

Did you press the "edit" button?
Example405.png

Found the problem - I didn't use the brackets.

[Quast65]

Found the problem - I didn't use the brackets.

Brackets, no brackets, doesnt make a difference for me:

Example406.png (4.44 KiB) Viewed 3227 times

I think it only takes a numeric value and in that case "0" (zero) works best, for me at least

Still a good way to go, no need to change any code then.


EDIT:
Kamnet, did you use musa or the "old fashioned" way of uploading/editing via openttd.org (thats what I did)?

[GarryG]

Hi Kamnet and Quast65 .. thank you kindly for this information.

When I get home this afternoon will se what I can do.

Got to catch a bus shortly as soon as I find some one to throw me one

Cheers

EDIT: I just did some of the file in Bananas by adding *** THIS GRF IS OBSOLETE *** is the Description.

Will check them properly later this evening.

[KeldorKatarn]

Is there a way to make these snow capable? Or for that matter all-terrain capable. There's always grass in the middle between the tracks. Would be neater if they left that transparent so whatever ground is under them remains what it is. If that could be done I'd use them in a heartbeat.

Edit: Nevermind, no idea why it didn't work in my one try but I'll use them

[GarryG]

Is there a way to make these snow capable? Or for that matter all-terrain capable. There's always grass in the middle between the tracks.

Unfortunately making them snow capable to my knowledge can not be done.

Probably the only way to have snowed platforms and stations is to make a separate set just for snow.

[KeldorKatarn]

Ah ok. Well then, most of them look fine in the snow. just some station buildings with trees and grass don't. But there's still others that work well But I'd say if you add more station buildings later, I'd recommend either leaving trees and plants out completely or, offer two version, one with plants one without, so there's always one that works in the snow too

[Quast65]

Unfortunately making them snow capable to my knowledge can not be done.

Yes they can. However I dont have that coding knowledge (and therefor couldnt show you how to do that )

But I'd say if you add more station buildings later, I'd recommend either leaving trees and plants out completely or, offer two version, one with plants one without, so there's always one that works in the snow too

They are Australian stations, not too much snow in the bush there...

[GarryG]

They are Australian stations, not too much snow in the bush there...

Thanks friend .. stations in Australia that do see snow not very many.

Been thinking for some time if make up a snow set with a few platforms and non track tiles with a bit of snow on them .. but that will be some time as working on lots other projects at moment.

Cheers

[KeldorKatarn]

You have that one thing in the freight stations I think, "door for modular locomotive sheds". I know what other set that's meant for but I'm not sure how it is exactly meant to be used, considering the roundhouse parts of that set aren't drivethrough? Can you give me an example for the intended use of that sprite?

[Quast65]

You have that one thing in the freight stations I think, "door for modular locomotive sheds". I know what other set that's meant for but I'm not sure how it is exactly meant to be used, considering the roundhouse parts of that set aren't drivethrough? Can you give me an example for the intended use of that sprite?

I believe they are intended to be used with one of the depots (that looks like one of the roundhouses from the Modular-set) in his trackset:
viewtopic.php?f=26&t=82691&start=40#p1203913

Been thinking for some time if make up a snow set with a few platforms and non track tiles with a bit of snow on them

The best way would be to go with figuring out how snow-awareness for stations works, rather than making a separate snow-set
Maybe some other stationcoder who's reading this would like to help.... (I would be very interested in that too )

[KeldorKatarn]

Oh so I also need AuzTracks for that to work. Oh well..

[GarryG]

I believe they are intended to be used with one of the depots (that looks like one of the roundhouses from the Modular-set) in his trackset:

Oh so I also need AuzTracks for that to work. Oh well.. Oh so I also need AuzTracks for that to work. Oh well..

So not to confuse people again (I hope) I added to the description of the Doors .. "(Path Aware - Use with AuzTracks Depots)"

The best way would be to go with figuring out how snow-awareness for stations works, rather than making a separate snow-set Maybe some other stationcoder who's reading this would like to help.... (I would be very interested in that too )

Good idea ..

[GarryG]

Trying something different .. seeing if Coal Stock Piles Cargo Aware be a nice addition.
This what the Tiles look like when they are empty.

Coal Cargo1.png (154.05 KiB) Viewed 2974 times

And this is what they look like when full.

Coal Cargo2.png (148.69 KiB) Viewed 2974 times

You need to have some experience in Lego to make these Coal Stock Piles .. They must be 2 tiles wide, but can be as long as you like 2x6, 2x8, 2x10 and even longer if like.

You have the corner pieces and in middle have centre pieces .. it the centre pieces that can be joined as many as you like and finish off with end pieces at other end.

Would you like to try? You will find them in the AuzFreight: Mining section.

AuzFreightStations_v008.grf

(3.46 MiB) Downloaded 66 times

[KeldorKatarn]

Neat, since my version supports 32 track types I'll just add Auz Tracks to our play. I don't like the track ballast that much but I really like the depots

[GarryG]

Hiding under this Car Park is a railway station and under the mowed grass is railway tracks, signals and tunnel entrances.

SubwayCarPark-1.png (490.37 KiB) Viewed 2892 times

These are cargo aware. Cars will appear in the car parks as passengers start to wait on the platforms below.

Still a bit of work to do to them .. as you can see I have one of the entrances wrong way around. Also need Subway entrances from the car park to the platforms.

Not sure how long take to have it ready.

[GarryG]

Made a few improvements to the subway car parks.
This shows the Car Park with no cars and can see the tunnels and some signals.

Car Park1.png (82.27 KiB) Viewed 2868 times

This one everything covered using the car Parks and Object Overlap tiles.

Car Park2.png (95.8 KiB) Viewed 2868 times

I hope to make a few more Subway station parts and some more Object Overlaps.

If you like to try and let me know if find any problems or offer some suggestions?

[Quast65]

Very nice!
I just think there are a lot of lampposts on it...

[GarryG]

Very nice! I just think there are a lot of lampposts on it...

Thanks pal, probably could remove some lamps .. notice I missing some SE side, so maybe could also remove them from NW side too but leave with the stairs.

I haven't tested them but should also work with the CS Station sets.

Like to add some buildings but so many town sets not sure which buildings will suit all, so that why I doing the Parks, Car Parks, and maybe try a bus terminal.

Cheers

[GarryG]

Been playing around with Depot Extensions for the AuzTracks and discovered these don't have to be used just with my AuzTracks .. they can also be used with all track sets and depots.

Have a look over in my AuzTrack forums to see what I been making.
viewtopic.php?f=26&t=82691&start=80#p1205993

Here the latest "AuzWaypointsAndMoreFreightStationsV4".

I changed a part in the Rail Station Selection name from "AuzTrainDepot: Train Depots and Add-Ons for AuzTrack Depots" to "AuzTrainDepot: Train Depots Extensions".

I made this name change because you no longer need AuzTracks to use with this section.

But be WARNEDmake sure all old versions of "AuzWaypointsAndMoreFreightStations" has been removed from your "newgrf" folder other wise when starting a saved game with previous versions of this file, for some reason it find a older version and instead of this newer version.

If all goes well other the next few days try get some work done to Subway Stations.

Cheers all

[ISA]

Wondering if You are able to code Coal Stock Piles in actual size (2*3 and 3*2) so we don't have to put tiles together 1 by 1?