Farmland Area Car Set mods

uktrackbuilder_loco · Post by **uktrackbuilder_loco** » 29 May 2007 13:20

Very nice I see you decided to go for single cab locomotives in the end and I look forward to seeing some of this in your usual high quality paint liveries

legs4poets · Post by **legs4poets** » 29 May 2007 17:57

uktrackbuilder_loco wrote:Very nice I see you decided to go for single cab locomotives in the end and I look forward to seeing some of this in your usual high quality paint liveries

Well I got this in PM
Clip-----
thats a f59phi from train sim you did a lousey just painting to look like you created it ---- end clip.

I agree it looks like one .....So I presume that it basic shape is copyrighted and I can't go any further with it... Prehaps I'll give it a hump in the middle to alter its shape enough, or would that still be wrong?

legs4poets · Post by **legs4poets** » 29 May 2007 18:06

Just to publically show it "blown-up" and perhaps quiet people..

uktrackbuilder_loco · Post by **uktrackbuilder_loco** » 29 May 2007 19:50

legs4poets wrote:
uktrackbuilder_loco wrote:Very nice I see you decided to go for single cab locomotives in the end and I look forward to seeing some of this in your usual high quality paint liveries
Well I got this in PM
Clip-----
thats a f59phi from train sim you did a lousey just painting to look like you created it ---- end clip.

I agree it looks like one .....So I presume that it basic shape is copyrighted and I can't go any further with it... Prehaps I'll give it a hump in the middle to alter its shape enough, or would that still be wrong?

all I can say is that most north american locomotive designs since the switcher have looked like each other so however the idiot was I suggest they either contribute some code and produce a model or maybe just shut up and appear less ignorant. How many of the models currently on download have not used MSTS to LoMo conversions or are not from Trainsim etc? Not many I'd guess as for copyright to the shape yes but unless you specifically have breached a trademarked shape and that shouldn't be hard to check I'd say carry on afterall you are creating via another platform and designing in blocks that are shown as original work

legs4poets · Post by **legs4poets** » 29 May 2007 23:18

I have my on thoughts on these. But since someone said someone else made one that looked like it or as they said mine lloked too close to being a copyright issue. I can't think of anyway to show proof I created these. I've shown works in progress and still hit a copyright. So before I release anyof my work I guess I'll have to show my CD-code for TS Modeler.

Too many legalities to distribute anything, I don't see why the others take the time to e-mail the authors to publish their work.

Now if (big if at present) I decide to continue to work on making stock do I have to wait consent from any and everyone that made a unit the looked somewhat like mine? Do I also have to give them credit because I seen some shape that looked like it in MSTS?

legs4poets · Post by **legs4poets** » 30 May 2007 04:31

This would be the finished product. Now just a matter of waiting and seeing if someone else may have made something similiar to this. Noticw a mid-ship hump. Has a high profile high HP engine

alphanumeric · Post by **alphanumeric** » 30 May 2007 06:23

legs4poets wrote:This would be the finished product. Now just a matter of waiting and seeing if someone else may have made something similiar to this. Noticw a mid-ship hump. Has a high profile high HP engine

that is a pretty funny diesign, but high HP now days can be made in small packages, I would loose the extra axle at the rear of the locomotive

uktrackbuilder_loco · Post by **uktrackbuilder_loco** » 30 May 2007 10:00

legs4poets wrote:This would be the finished product. Now just a matter of waiting and seeing if someone else may have made something similiar to this. Noticw a mid-ship hump. Has a high profile high HP engine

The B-C design has been tried before and it does seem to work not sure however about the safety factors at speed as the front end will probably "hunt" due to the shorter bogie wheelbase at that point, I would tend to go with a C-B arrangement to give the front end more support. The hump is a good idea just put it down to UIC regulations regarding the use of exhaust silencer systems and say its a DESIGN factor.

Plastikman · Post by **Plastikman** » 30 May 2007 17:52

Well.. now that you mention it.. once you added the hump.. it looks a lot like somthing my dog made once. similar color too...

Ok that joke was in poor taste.. just make it already lol... spit out a lomo beta

andel · Post by **andel** » 30 May 2007 17:56

Plastikman wrote:Well.. now that you mention it.. once you added the hump.. it looks a lot like somthing my dog made once. similar color too...

Ok that joke was in poor taste.. just make it already lol... spit out a lomo beta

I agree. It is in poor taste...

Lets see a loco output then!

legs4poets · Post by **legs4poets** » 31 May 2007 00:09

Here's a beta version ..... I could not do more than one beta test myself... I left the lomo CD tray sitting on the table when went to store and the cat desided it was a flashy new toy.... Sorry not sure if I got the bogies right

legs4poets · Post by **legs4poets** » 31 May 2007 20:53

How about GP7/9 with newer stlye cab

Plastikman · Post by **Plastikman** » 01 Jun 2007 19:34

legs4poets wrote:How about GP7/9 with newer stlye cab

I dont like it... It looks like a pitbull or somthing with to large of a head.

Train-a-Mania · Post by **Train-a-Mania** » 01 Jun 2007 20:48

It looks like an RS1375 - or something like that name.

What exactly does this have to do with Farmlands?

Plastikman · Post by **Plastikman** » 01 Jun 2007 21:37

Train-a-Mania wrote:It looks like an RS1375 - or something like that name.

What exactly does this have to do with Farmlands?

about as much as my UFO i made for Lomo.. I wonder what ever happened to that..

Train-a-Mania · Post by **Train-a-Mania** » 01 Jun 2007 22:54

So that's the secret thing you made for LoMo!

Plastikman · Post by **Plastikman** » 01 Jun 2007 22:56

Train-a-Mania wrote:So that's the secret thing you made for LoMo!

lol everyone knew i made that.. lol

legs4poets · Post by **legs4poets** » 02 Jun 2007 02:50

Plastikman wrote:
Train-a-Mania wrote:It looks like an RS1375 - or something like that name.

What exactly does this have to do with Farmlands?
about as much as my UFO i made for Lomo.. I wonder what ever happened to that..

Well the I was going to use my version of a crowl type cab but alas Maple Leaf tracks or 3dtrains has a version of that cab and I don't want copyright issues. It does look lots better with the smaller crowl cab.

This topic is for farmland car set. ANd last I checked 99.9% of all long distance trains will go through farmland in US.

Besides the farmland mod topic is locked! I have taken all the files off there because I lacked permission to use certain graphics. As soon as I feel like writing and getting permission (or change graphics to my own) there will be no further work done there. I have 40% of the industry graphics done and run out of ideas for the others.

legs4poets · Post by **legs4poets** » 06 Jun 2007 01:34

A number of various gp7/9 rebuild types all of my own creation. Some of these types are already available in mods by others. I'll convert all these to lomo unless I'm informed of a copyright or other reason not to.

Plastikman · Post by **Plastikman** » 06 Jun 2007 01:49

make what you want there buddy, it is your mod. lol

Transport Tycoon Forums

Farmland Area Car Set mods

Who is online