Not that I'm aware of. I don't know of anybody who is working on it. All the coders I know are already in the middle of projects. If one does become available, you might want to be over on the official Discord to get first wind of it.
JGR's Patch Pack
Moderator: OpenTTD Developers
Re: JGR's Patch Pack
Do you like drones, quadcopters & flying toys? Check out Drone Strike Force!
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
Re: JGR's Patch Pack
I've only got as far as verifying that the feature works as expected.
If I get time I may look into making a modified version of a suitable existing ship GRF to support this.
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
Re: JGR's Patch Pack
Hi JGR!
As always, many thanks for your contribution to the game.
I have a crash. I was also making my stations longer to accept newer trains but one of my trains old trains dislike it...
I loaded the chrash...sav and didn't crash and seems ok.
If you can have a look to understand what cause the error I will much appreciated.
Best regards and
Alberto
As always, many thanks for your contribution to the game.
I have a crash. I was also making my stations longer to accept newer trains but one of my trains old trains dislike it...
I loaded the chrash...sav and didn't crash and seems ok.
If you can have a look to understand what cause the error I will much appreciated.
Best regards and
Alberto
- Attachments
-
- crash-20240116T103159Z.png
- (736.35 KiB) Not downloaded yet
-
- crash-20240116T103159Z.sav
- (1.57 MiB) Downloaded 102 times
-
- crash-20240116T103159Z.log.txt
- (45.53 KiB) Downloaded 120 times
Re: JGR's Patch Pack
Thanks, this should be fixed in the next release now.alc wrote: ↑16 Jan 2024 10:55 Hi JGR!
As always, many thanks for your contribution to the game.
I have a crash. I was also making my stations longer to accept newer trains but one of my trains old trains dislike it...
I loaded the chrash...sav and didn't crash and seems ok.
If you can have a look to understand what cause the error I will much appreciated.
Best regards and
Alberto
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
Re: JGR's Patch Pack
I can confirm, that multi-cargo ships work just fine, these are however not yet available ...
But, this cannot be said of the 'Transparent' mode (glass effect), it no longer works in JGR-PP v0.56.2, but there is no problem in OpenTTD v13.4.
This affects all features that have sprites, like glass panels and roof shadows, to be shown in transparent mode (have bit 14 set) and even includes the glass panels of the Original TTD Station Roof. The sprite in question shows up in the sprite aligner as normal, but has zero effect in game and does not even display at all.
Re: JGR's Patch Pack
I cannot reproduce anything like that. Sprites look fine here.OzTrans wrote: ↑17 Jan 2024 08:34 But, this cannot be said of the 'Transparent' mode (glass effect), it no longer works in JGR-PP v0.56.2, but there is no problem in OpenTTD v13.4.
This affects all features that have sprites, like glass panels and roof shadows, to be shown in transparent mode (have bit 14 set) and even includes the glass panels of the Original TTD Station Roof. The sprite in question shows up in the sprite aligner as normal, but has zero effect in game and does not even display at all.
The only relevant thing that i can think of this: https://github.com/OpenTTD/OpenTTD/pull/11616, is this what you are talking about?
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
Re: JGR's Patch Pack
Could be ... Look at the shadows created by the the station roofs ... not there any more ... all sprites are in paletted 8bpp ...JGR wrote: ↑17 Jan 2024 19:48I cannot reproduce anything like that. Sprites look fine here.
The only relevant thing that i can think of this: https://github.com/OpenTTD/OpenTTD/pull/11616, is this what you are talking about?
... and here is the code that works in OpenTTD v13.4 but not in JGR-PP ...
Code: Select all
// DEFSTNLAY STATIONCODE(PC.PLNR) TILEID(++) ;
// LAYOUT(*B2_PLATFORM_REAR_NRM ;
// *B2_PLATFORM_REAR_SNO ;
// *B1_STN_FENCE_N3 ;
// *B2_ROOF_REAR_NRM ;
// *B2_ROOF_REAR_SNO ;
// *B2_ROOF_REAR_SHDW ;
// *B2_PLATFORM_FRONT_NRM ;
// *B2_PLATFORM_FRONT_SNO ;
// *B2_ROOF_FRNT_NRM ;
// *B2_ROOF_FRNT_SNO ;
// *B2_ROOF_FRNT_SHDW ;
// *B1_STN_FENCE_S2 ;
// *CO_SIGN_AVL_1947P) ;
// GROUNDSPRITE(*RAIL_TRACK) ;
// COMMENT(Plain Platforms [roofed] - single)
4D F3 03 00 00 00 00 E4 04 00 C0 41 00 00 00 00 05 0C 04 60 04
E6 04 00 C0 41 00 00 00 00 05 0C 04 61 04
9A 04 00 80 43 00 00 00 00 02 10 04 53 22 04
18 05 00 80 41 00 00 00 00 05 10 0C 60 04
1A 05 00 80 41 00 00 00 00 05 10 0C 61 04
1C 45 00 80 40 00 00 00 00 05 10 0E 04 <<<< Shadows, with bit 14 set in sprite number.
EA 04 00 C0 41 00 0B 00 00 02 0A 04 60 04
EC 04 00 C0 41 00 0B 00 00 02 0A 04 61 04
1E 05 00 80 41 00 0B 00 00 04 10 0A 60 04
20 05 00 80 41 00 0B 00 00 04 10 0A 61 04
22 45 00 80 40 00 0C 00 00 05 10 0E 04 <<<< Shadows
9E 04 00 80 43 00 10 00 00 02 10 04 52 22 04
32 04 00 80 41 00 00 00 00 00 00 00 41 03
Re: JGR's Patch Pack
The closest GRF that I have to what appears to be in your screenshot is Canadian Stations v1.6.OzTrans wrote: ↑17 Jan 2024 23:05Could be ... Look at the shadows created by the the station roofs ... not there any more ... all sprites are in paletted 8bpp ...JGR wrote: ↑17 Jan 2024 19:48I cannot reproduce anything like that. Sprites look fine here.
The only relevant thing that i can think of this: https://github.com/OpenTTD/OpenTTD/pull/11616, is this what you are talking about?
Transparent Mode A.png
... and here is the code that works in OpenTTD v13.4 but not in JGR-PP ...
Code: Select all
// DEFSTNLAY STATIONCODE(PC.PLNR) TILEID(++) ; // LAYOUT(*B2_PLATFORM_REAR_NRM ; // *B2_PLATFORM_REAR_SNO ; // *B1_STN_FENCE_N3 ; // *B2_ROOF_REAR_NRM ; // *B2_ROOF_REAR_SNO ; // *B2_ROOF_REAR_SHDW ; // *B2_PLATFORM_FRONT_NRM ; // *B2_PLATFORM_FRONT_SNO ; // *B2_ROOF_FRNT_NRM ; // *B2_ROOF_FRNT_SNO ; // *B2_ROOF_FRNT_SHDW ; // *B1_STN_FENCE_S2 ; // *CO_SIGN_AVL_1947P) ; // GROUNDSPRITE(*RAIL_TRACK) ; // COMMENT(Plain Platforms [roofed] - single) 4D F3 03 00 00 00 00 E4 04 00 C0 41 00 00 00 00 05 0C 04 60 04 E6 04 00 C0 41 00 00 00 00 05 0C 04 61 04 9A 04 00 80 43 00 00 00 00 02 10 04 53 22 04 18 05 00 80 41 00 00 00 00 05 10 0C 60 04 1A 05 00 80 41 00 00 00 00 05 10 0C 61 04 1C 45 00 80 40 00 00 00 00 05 10 0E 04 <<<< Shadows, with bit 14 set in sprite number. EA 04 00 C0 41 00 0B 00 00 02 0A 04 60 04 EC 04 00 C0 41 00 0B 00 00 02 0A 04 61 04 1E 05 00 80 41 00 0B 00 00 04 10 0A 60 04 20 05 00 80 41 00 0B 00 00 04 10 0A 61 04 22 45 00 80 40 00 0C 00 00 05 10 0E 04 <<<< Shadows 9E 04 00 80 43 00 10 00 00 02 10 04 52 22 04 32 04 00 80 41 00 00 00 00 00 00 00 41 03
I cannot reproduce any such problems with this GRF in any blitter configuration.
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
Re: JGR's Patch Pack
I've got the culprit ...
We have to go back to the old days of TTDPatch. BTW, Canadian Stations v1.6 was coded to be TTDPatch compatible, that is why it works there.
In newer developments, I did no longer also add the recolour sprite (802) to the sprite number (by mistake) and everything has been working well until now. Up until at least v13.4 transparent mode worked with or without the recolour sprite 802. This has been the case for rail stations as well as road stops and objects.
Anyway, thanks for looking into it. Back in business again ...
-
- Engineer
- Posts: 10
- Joined: 16 Feb 2020 17:18
Re: JGR's Patch Pack
Hi all.. quick question to anyone who might know, but is there a place I can check to see where passengers/cargo on vehicles are going to? a bit like the stations cargo screen which says where passengers/cargo want(s) to go but for the vehicle itself. At the moment it says e.g. 'X amount 'of passengers from 'Y station'. But if it had a drop down to show - 10 passenger to here, 20 passenger to there etc.
if not, is this something that could be implemented at all? would be a nice feature (not necessarily important/functional, but for informative purposes)
if not, is this something that could be implemented at all? would be a nice feature (not necessarily important/functional, but for informative purposes)
Re: JGR's Patch Pack
Cargo distribution? If you set it to asymmetric or symmetric it will show where cargo wants to go and how much.SparkyMarkyR33 wrote: ↑21 Jan 2024 22:59 Hi all.. quick question to anyone who might know, but is there a place I can check to see where passengers/cargo on vehicles are going to? a bit like the stations cargo screen which says where passengers/cargo want(s) to go but for the vehicle itself. At the moment it says e.g. 'X amount 'of passengers from 'Y station'. But if it had a drop down to show - 10 passenger to here, 20 passenger to there etc.
if not, is this something that could be implemented at all? would be a nice feature (not necessarily important/functional, but for informative purposes)
Take a look at: http://www.tt-forums.net/viewtopic.php?f=47&t=74993
Why do it tomorrow when you can do it today
Why do it tomorrow when you can do it today
Re: JGR's Patch Pack
That's not how CargoDist works, though. The cargo has a provisional destination while waiting at a station, which is used to decide which vehicles it will want to get loaded onto. But as soon as it gets loaded onto a vehicle, it "forgets" that destination. Then it will just unload at some random station later, where it might either decide to be delivered, if it can, or transfer to another vehicle, if there are any that would not just bring it further in the same direction or backwards.SparkyMarkyR33 wrote: ↑21 Jan 2024 22:59 Hi all.. quick question to anyone who might know, but is there a place I can check to see where passengers/cargo on vehicles are going to? a bit like the stations cargo screen which says where passengers/cargo want(s) to go but for the vehicle itself. At the moment it says e.g. 'X amount 'of passengers from 'Y station'. But if it had a drop down to show - 10 passenger to here, 20 passenger to there etc.
if not, is this something that could be implemented at all? would be a nice feature (not necessarily important/functional, but for informative purposes)
-
- Engineer
- Posts: 10
- Joined: 16 Feb 2020 17:18
Re: JGR's Patch Pack
Cargo distribution? If you set it to asymmetric or symmetric it will show where cargo wants to go and how much.
I know that part, I apologise if there was some misunderstanding. I was wondering if there was a part in the vehicle information window specifically that might expand on the cargo inside the vehicle itself
That's not how CargoDist works, though. The cargo has a provisional destination while waiting at a station, which is used to decide which vehicles it will want to get loaded onto. But as soon as it gets loaded onto a vehicle, it "forgets" that destination. Then it will just unload at some random station later, where it might either decide to be delivered, if it can, or transfer to another vehicle, if there are any that would not just bring it further in the same direction or backwards.
Ahh thanks anyway, would of been a nice thing to have show up
I know that part, I apologise if there was some misunderstanding. I was wondering if there was a part in the vehicle information window specifically that might expand on the cargo inside the vehicle itself
That's not how CargoDist works, though. The cargo has a provisional destination while waiting at a station, which is used to decide which vehicles it will want to get loaded onto. But as soon as it gets loaded onto a vehicle, it "forgets" that destination. Then it will just unload at some random station later, where it might either decide to be delivered, if it can, or transfer to another vehicle, if there are any that would not just bring it further in the same direction or backwards.
Ahh thanks anyway, would of been a nice thing to have show up
Re: JGR's Patch Pack
Hi JGR,
this time, I am not finding any bug. What I would like is to request you a feature where on the station history graph, that currently is up to 48 days if it is possible to add a button on the history window to switch between 48 day or 48 months.
Having a longer history allows to see a long term behavior of the transport capacity. I have stations with thousands of passanger that I want to reduce, then I add more capacity but I get lost if in the mid term is working or not.
It could be implemented with a daily accumulation in a variable and then divided by the number of days of that month. In order to avoid a lag of the game the first day of the month, it could be done, for instance, every day 15 of each month.
As always,
Alberto
this time, I am not finding any bug. What I would like is to request you a feature where on the station history graph, that currently is up to 48 days if it is possible to add a button on the history window to switch between 48 day or 48 months.
Having a longer history allows to see a long term behavior of the transport capacity. I have stations with thousands of passanger that I want to reduce, then I add more capacity but I get lost if in the mid term is working or not.
It could be implemented with a daily accumulation in a variable and then divided by the number of days of that month. In order to avoid a lag of the game the first day of the month, it could be done, for instance, every day 15 of each month.
As always,
Alberto
-
- Tycoon
- Posts: 1210
- Joined: 16 Oct 2018 08:31
- Location: Heart of the Highlands. Not Scottish. Czech.
Re: JGR's Patch Pack
I have a problem. He's been in Tycoon for a long time and I have no idea if he has a solution.
I have a train that goes to two stations. In one, another train transfers cattle, because running the track to the receiving station would be complicated at that point by other, unrelated trains.
So the train receives the cattle, and unloads at the second station, and loads the meat and fish.
So in both stations, if possible, it loads and unloads the required cargo, but not all.
But when I give this command, it looks like the car has no commands.
Why is it hiding like this and can it be solved?
I have a train that goes to two stations. In one, another train transfers cattle, because running the track to the receiving station would be complicated at that point by other, unrelated trains.
So the train receives the cattle, and unloads at the second station, and loads the meat and fish.
So in both stations, if possible, it loads and unloads the required cargo, but not all.
But when I give this command, it looks like the car has no commands.
Why is it hiding like this and can it be solved?
- Attachments
-
- Quigley & Co., 11. kvě 1967.png
- (172.78 KiB) Not downloaded yet
-
- Tycoon
- Posts: 1210
- Joined: 16 Oct 2018 08:31
- Location: Heart of the Highlands. Not Scottish. Czech.
Re: JGR's Patch Pack
My point is that it's confusing to me, if I come back to the game after a long time I may think I forgot to give commands to the train.
Re: JGR's Patch Pack
I can look into something along these lines. I'm not too keen to allow the amount of storage for histories to be very large, as this wastes memory, but summarising old histories into weekly/monthly/etc averages is likely doable.alc wrote: ↑24 Jan 2024 13:47 Hi JGR,
this time, I am not finding any bug. What I would like is to request you a feature where on the station history graph, that currently is up to 48 days if it is possible to add a button on the history window to switch between 48 day or 48 months.
Having a longer history allows to see a long term behavior of the transport capacity. I have stations with thousands of passanger that I want to reduce, then I add more capacity but I get lost if in the mid term is working or not.
It could be implemented with a daily accumulation in a variable and then divided by the number of days of that month. In order to avoid a lag of the game the first day of the month, it could be done, for instance, every day 15 of each month.
As always,
Alberto
I am finding it difficult to understand what you are actually asking. If you are talking about the full load and unload dropdowns, then the defaults are "Pokud možno naložit" and "Vyložit vyžadovaný náklad". These are what are used for normal orders and so don't need extra text in the order listing.Argus wrote: ↑27 Jan 2024 13:36 I have a problem. He's been in Tycoon for a long time and I have no idea if he has a solution.
I have a train that goes to two stations. In one, another train transfers cattle, because running the track to the receiving station would be complicated at that point by other, unrelated trains.
So the train receives the cattle, and unloads at the second station, and loads the meat and fish.
So in both stations, if possible, it loads and unloads the required cargo, but not all.
But when I give this command, it looks like the car has no commands.
Why is it hiding like this and can it be solved?
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
-
- Tycoon
- Posts: 1210
- Joined: 16 Oct 2018 08:31
- Location: Heart of the Highlands. Not Scottish. Czech.
Re: JGR's Patch Pack
Yes, I understand. But if there is no text, how can I be sure that the command is correct the next time I upload this game? I don't always have to remember why that is. And in my opinion, it can be unnecessarily confusing even for newbies.
It's not a bug, it's just a cosmetic flaw. Basically, I just wanted to ask why this is the case and if it would be possible to set the text to be there anyway.
If that's not possible for some reason, I understand.
It's not a bug, it's just a cosmetic flaw. Basically, I just wanted to ask why this is the case and if it would be possible to set the text to be there anyway.
If that's not possible for some reason, I understand.
Re: JGR's Patch Pack
This is the default state. Every order having redundant text next to it to say that it is the default is not really helpful.Argus wrote: ↑27 Jan 2024 14:56 Yes, I understand. But if there is no text, how can I be sure that the command is correct the next time I upload this game? I don't always have to remember why that is. And in my opinion, it can be unnecessarily confusing even for newbies.
It's not a bug, it's just a cosmetic flaw. Basically, I just wanted to ask why this is the case and if it would be possible to set the text to be there anyway.
If that's not possible for some reason, I understand.
Ex TTDPatch Coder
Patch Pack, Github
Patch Pack, Github
-
- Tycoon
- Posts: 1210
- Joined: 16 Oct 2018 08:31
- Location: Heart of the Highlands. Not Scottish. Czech.
Re: JGR's Patch Pack
Yes, but there is no text, so from my perspective it looks like I didn't set the command correctly.
Now the only way to make sure the command is working is to watch what the train is doing.
But okay, I understand why that is. Although not completely. I think my logic conflicts with the developers logic.
Now the only way to make sure the command is working is to watch what the train is doing.
But okay, I understand why that is. Although not completely. I think my logic conflicts with the developers logic.
Who is online
Users browsing this forum: Amazon [Bot] and 4 guests