[NRT] RattRoads - 0.4.1 released 05-15-19!

Discuss, get help with, or post new graphics for TTDPatch and OpenTTD, using the NewGRF system, here. Graphics for plain TTD also acceptable here.

Moderator: Graphics Moderators

User avatar
Andrew350
Route Supervisor
Route Supervisor
Posts: 486
Joined: 19 Dec 2011 07:54
Location: Washington State, USA
Contact:

[NRT] RattRoads - 0.4.1 released 05-15-19!

Post by Andrew350 » 10 Apr 2017 07:42

After years of development, as of May 2nd, 2019 NRT is officially part of OpenTTD! To celebrate, I've released version 0.4 of RattRoads, available below or via the online content!
current_roadtypes_0.4.png
current_roadtypes_0.4.png (33.01 KiB) Viewed 1220 times
RattRoads is essentially the successor to ARRS, featuring revamped sprites and 5 additional roadtypes to take advantage of some of NRT's features. All six road types are compatible to each other and the default [ROAD] type so any vehicles can drive on them. Below is a basic overview of what is included:

Dirt Road [DIRT] - Everyone's favorite bumpy, dusty, dirt roads make a return for RattRoads featuring a shiny dirty new look. These roads are available from year 0 and due to being even less safe than their paved cousins only have a speed limit of 25mph.

Sett Paved Road [SETT] - Also available from year 0, these roads offer a paved alternative to the muddy, bumpy roads of the old days. Made with sett stones, they offer only a slight increase in speed to 30mph, but they look especially appropriate inside old towns.

Basic Asphalt Road [ROAD] - Introduced in 1920, this is the roadtype towns will build by default. Nothing more than a strip of pavement, it is cheap and only has a speed limit of 40mph. Note that because this roadtype is the default, towns will always build this type, even before 1920.

Improved Asphalt Road [ASP1] - Boasting improved safety features, such as a yellow line painted on the surface, this roadtype is introduced in 1940 and has a speed limit of 55mph

Modern Asphalt Road [ASP2] - This roadtype is introduced in 1970 and includes paved shoulders and fog lines, allowing a higher speed limit of 85mph.

Highway [HWAY] - Introduced in 1955, the Highway roadtype has no speed limit, but is very expensive. Eventually I will include a set of objects to augment highways similar to the way I tried to in ARRS Objects, but they are not included yet. Note that houses will not build along this roadtype!


What's that? You don't want any speed limits? You want them slower? You want to build Highways in 1700? Perfect, because since version 0.2.0, RattRoads now has parameters to allow you to configure all of those things as you please! And as a bonus for our European friends, there's now also a Euro/UK road surface alternative which can be activated by parameter (default is still American style), as well as an available French translation (which is by now very outdated and incomplete)!

---------

Please mind that this roadset is not 100% complete, especially due to the ongoing development of NotRoadTypes itself. *cough*don't build tunnels*cough* :wink: As new features are added the set will need to be updated too, and there are a few things I still need to polish, but otherwise it's functional and is a good representation of what the set will be. :) Let me know of any problems with the set, and if you encounter any crashes or similar please let the NRT guys know so it can get fixed.

This NewGRF requires OpenTTD-master-20190502 or later to function, and as usual is released under GPL v2 license. Huge thanks to the team behind NRT and OpenTTD itself for making this possible! :)

Enjoy!
rattroads.tar
Version 0.4.1 - fixes a small graphical mistake with some bridge overlays
(266 KiB) Downloaded 58 times
rattroads_source_0.4.0.zip
(231.91 KiB) Downloaded 31 times
Last edited by Andrew350 on 16 May 2019 04:17, edited 4 times in total.

User avatar
Kalen
Traffic Manager
Traffic Manager
Posts: 160
Joined: 07 Jun 2008 22:07
Location: Portugal

Re: [NRT] RATT Roads

Post by Kalen » 10 Apr 2017 11:49

I finally got around to testing the RATT build and I must say I am impressed! One of the things I love the most about this is how it appears that with NRT we will no longer have to worry about road set compatibility for old sets like TBRS, much like how it is for tracktypes currently.

Also: I did the unthinkable and built and even used tunnels and nothing out of the ordinary happened... should something have happened? :P

User avatar
supermop
Tycoon
Tycoon
Posts: 1043
Joined: 21 Feb 2010 00:15
Location: Fitzroy North - 96

Re: [NRT] RATT Roads

Post by supermop » 10 Apr 2017 13:43

Very happy to see this development!

User avatar
wallyweb
Tycoon
Tycoon
Posts: 5524
Joined: 27 Nov 2004 15:05
Location: Canada

Re: [NRT] RATT Roads

Post by wallyweb » 10 Apr 2017 16:11

One road type is missing ... The very rural gravel/mud/dirt road we all love to use in order to smash our suspensions while on our way to fishing and hunting camps and forestry and mining operations. 8) They could also be used for those unavoidable "Road Under Construction" zones that make us late for appointments and where we get ticketed and fined for not slowing down. :P

Ooops :oops: I just noticed they are on your to-do list.

User avatar
einsteinyh
Engineer
Engineer
Posts: 35
Joined: 15 Feb 2016 01:22
Location: Bogotá

Re: [NRT] RATT Roads

Post by einsteinyh » 10 Apr 2017 18:08

also would be great having a pre-1920 stone paved road in towns apart from dirt rural roads

User avatar
Andrew350
Route Supervisor
Route Supervisor
Posts: 486
Joined: 19 Dec 2011 07:54
Location: Washington State, USA
Contact:

Re: [NRT] RATT Roads

Post by Andrew350 » 11 Apr 2017 01:30

Kalen wrote:I finally got around to testing the RATT build and I must say I am impressed! One of the things I love the most about this is how it appears that with NRT we will no longer have to worry about road set compatibility for old sets like TBRS, much like how it is for tracktypes currently.
That is indeed the case. The only downside to that though is that not all bridges are exactly the same, but all road surfaces are drawn using the same generic sprites, so you lose some fine control over the details, leading to overlapping pixels and/or abrupt transitions in some places (the same can be seen in tracktypes). It's a relatively minor issue though, and with some work can be mostly overcome.
Kalen wrote:Also: I did the unthinkable and built and even used tunnels and nothing out of the ordinary happened... should something have happened? :P
Nothing should "happen" per se, just that the roads will overlap the tunnels and look ugly. I think it only affects the two later roadtypes. There seems to be a lack of custom tunnel sprite support at the moment, so just ignore it if you see it :)
einsteinyh wrote:also would be great having a pre-1920 stone paved road in towns apart from dirt rural roads
That is one of the types I am considering adding in addition to dirt, just need to draw some sprites. My other serious consideration was some kind of haul road, a very rough/large gravel road or something. But that depends on whether I can make an interestingly unique set of sprites to differentiate it from "normal" dirt roads, so we'll see. :)

User avatar
Kalen
Traffic Manager
Traffic Manager
Posts: 160
Joined: 07 Jun 2008 22:07
Location: Portugal

Re: [NRT] RATT Roads

Post by Kalen » 11 Apr 2017 08:16

Oh, right, I see the overlap now. It was so subtle I hadn't even noticed it until you pointed it out to me. :)

On a different note, I was worried about what might happen when using multiple NRT sets or when using TTRS (which has its own roads), but it seems NewGRF loading order handles these neatly. The last loaded set defines the default roadtype, which is good. Amusingly, if you load TTRS after NRT sets and have its roads turned on, the TTRS road sprite is drawn first, then the default roadtype sprite is overlaid on it, leading to a pixel eclipse, if that makes sense.

KeldorKatarn
Transport Coordinator
Transport Coordinator
Posts: 274
Joined: 13 Apr 2010 21:31

Re: [NRT] RATT Roads

Post by KeldorKatarn » 11 Apr 2017 21:15

Could you add an ISR-style industrial road? Should behave like a standard city type road just look like the ones from ISR with the rest of the tile filled with the ISR style tile. That way one could finally build industrial areas and really have trucks drive in there instead of just faking it badly with overlay tiles and stuff like that.

User avatar
supermop
Tycoon
Tycoon
Posts: 1043
Joined: 21 Feb 2010 00:15
Location: Fitzroy North - 96

Re: [NRT] RATT Roads

Post by supermop » 11 Apr 2017 21:33

KeldorKatarn wrote:Could you add an ISR-style industrial road? Should behave like a standard city type road just look like the ones from ISR with the rest of the tile filled with the ISR style tile. That way one could finally build industrial areas and really have trucks drive in there instead of just faking it badly with overlay tiles and stuff like that.

The first roadtype set released is exactly that: viewtopic.php?f=67&t=75941

I Included both Chips and ISR style roads and tramways.

User avatar
alluke
Transport Coordinator
Transport Coordinator
Posts: 328
Joined: 27 Dec 2010 16:26
Location: Finland

Re: [NRT] RATT Roads

Post by alluke » 12 Apr 2017 22:40

Could you add parameter for European/adjustable speed limits, e.g. 60/80/100 kmh/h? :)
Image

User avatar
Andrew350
Route Supervisor
Route Supervisor
Posts: 486
Joined: 19 Dec 2011 07:54
Location: Washington State, USA
Contact:

Re: [NRT] RATT Roads

Post by Andrew350 » 14 Apr 2017 05:28

I was already planning on adding a "hard" setting with lower speeds and increased costs, so I suppose I could consider custom speed limits. Just depends how much work is involved.

Really though someone should just make an updated European road set. :wink:

Diesel Power
Traffic Manager
Traffic Manager
Posts: 146
Joined: 18 Jun 2016 19:05

Re: [NRT] RATT Roads

Post by Diesel Power » 22 Jul 2017 20:20

Hey guys, i'm having trouble getting this grf set up. I've updated Openttd to the version needed to this grf, downloaded the .zip file from this page, converted it into a .tar file and placed it into my newgrf folder with the rest of them but it's not showing up in the grf settings menu. any ideas?

User avatar
kamnet
Moderator
Moderator
Posts: 6711
Joined: 28 Sep 2009 17:15
Location: Eastern KY
Contact:

Re: [NRT] RATT Roads

Post by kamnet » 23 Jul 2017 00:25

Diesel Power wrote:Hey guys, i'm having trouble getting this grf set up. I've updated Openttd to the version needed to this grf, downloaded the .zip file from this page, converted it into a .tar file and placed it into my newgrf folder with the rest of them but it's not showing up in the grf settings menu. any ideas?
Did you unpack the zip file and repackage it as a tar file?

User avatar
wallyweb
Tycoon
Tycoon
Posts: 5524
Joined: 27 Nov 2004 15:05
Location: Canada

Re: [NRT] RATT Roads

Post by wallyweb » 23 Jul 2017 11:45

Diesel Power wrote:I've updated Openttd to the version needed to this grf,
The [NRT] in the topic title means that you need to install the Not Road Type fork.
Vanilla OTTD will not work.

Diesel Power
Traffic Manager
Traffic Manager
Posts: 146
Joined: 18 Jun 2016 19:05

Re: [NRT] RATT Roads

Post by Diesel Power » 23 Jul 2017 20:32

The Openttd version I'm running is "Open TTD g8c7bd1b2-road-and-tram-types", and yes I unpacked it and re-packed it as a .tar and placed it in the GRF folder with all the other GRFs

User avatar
Andrew350
Route Supervisor
Route Supervisor
Posts: 486
Joined: 19 Dec 2011 07:54
Location: Washington State, USA
Contact:

Re: [NRT] RATT Roads

Post by Andrew350 » 24 Jul 2017 13:50

You shouldn't really use the zip file if you're just trying to play it - that's for the source material. Just download the grf file and place it as it is in the newgrf folder.

There's usually no need to convert anything :)

Diesel Power
Traffic Manager
Traffic Manager
Posts: 146
Joined: 18 Jun 2016 19:05

Re: [NRT] RATT Roads

Post by Diesel Power » 28 Jul 2017 21:15

Thanks guys. Now sorted. Me being thick! Now time for testing...

Pascal Lambert
Engineer
Engineer
Posts: 30
Joined: 30 Aug 2004 15:45
Location: France

Re: [NRT] RATT Roads

Post by Pascal Lambert » 05 May 2018 20:17

Andrew350 wrote:Welcome to the development topic for my version of an NRT roadset. :)

rattroads_0.1.0_source.zip
Many thanks to you for this magnificent work !

Please find hereafter a proposal translation so french can enjoy this GRF
Attachments
french.lng
(1.92 KiB) Downloaded 61 times

User avatar
acs121
Tycoon
Tycoon
Posts: 1933
Joined: 03 Nov 2017 18:57
Location: Courbevoie, near Paris, France

Re: [NRT] RATT Roads

Post by acs121 » 05 May 2018 21:01

Pascal Lambert wrote:
Andrew350 wrote:Welcome to the development topic for my version of an NRT roadset. :)

rattroads_0.1.0_source.zip
Many thanks to you for this magnificent work !

Please find hereafter a proposal translation so french can enjoy this GRF
Bonjour Lambert,

The translation for "freeway" is somewhat wrong. It's not "route illimitée", which would then not make any sense in english (unlimited roads), but the closest is "autoroute". However, there's not multiple lanes on this road, sadly.

User avatar
wallyweb
Tycoon
Tycoon
Posts: 5524
Joined: 27 Nov 2004 15:05
Location: Canada

Re: [NRT] RATT Roads

Post by wallyweb » 05 May 2018 21:26

acs121 wrote:
Pascal Lambert wrote:
Andrew350 wrote:Welcome to the development topic for my version of an NRT roadset. :)

rattroads_0.1.0_source.zip
Many thanks to you for this magnificent work !

Please find hereafter a proposal translation so french can enjoy this GRF
Bonjour Lambert,

The translation for "freeway" is somewhat wrong. It's not "route illimitée", which would then not make any sense in english (unlimited roads), but the closest is "autoroute". However, there's not multiple lanes on this road, sadly.
"Highway" is probably the most generic as it can be two lane or multi-lane.
"Freeway" is a highway that has no tolls (It is free :D ) (Route sans péages?). The usual configuration is multi-lane but OTTD does not support multi-lane. A player must build two or more two lane roads in parallel while using the one-way feature to control direction. Road stops can be used to mimic toll booths.

Post Reply

Return to “Graphics Development”

Who is online

Users browsing this forum: No registered users and 7 guests