[BETA] 314, 315, 507, 508

Amtrak · Post by **Amtrak** » 25 Aug 2005 07:15

i modded the reliability for the mu's and it worked. However, after sometime it semm to cause crashes when "highlighted" in the scenario creatior. and i removed the download. Maybe it is corrupt. (run in v.c. and see if it works)

natethegreat · Post by **natethegreat** » 25 Aug 2005 12:45

Amtrak wrote:i modded the reliability for the mu's and it worked. However, after sometime it semm to cause crashes when "highlighted" in the scenario creatior. and i removed the download. Maybe it is corrupt. (run in v.c. and see if it works)

If it only started crashing Loco after you edited the .XML, then yes, you broke it. It is easy to do. I have done it a number of times.

Amtrak · Post by **Amtrak** » 29 Aug 2005 09:53

yes, very likely BUT it worked fine for a while the n it just started to cause crashes. i think the original may be slightly corrupt but i cant check because my computer is being roformatted and cleaned up currently

jdtech · Post by **jdtech** » 29 Aug 2005 09:58

I didn't do any XML editing and it was the first addition to a clean v1.76 Lomo install and it immediatly crashed upon highlight of the Class 508 in Scenario Editing. Very well I thought and replaced the new 508 with the original file. No crashing in Scenario editor for a while. Then I installed another piece of content and it crashed about 30 seconds after entering Scenario Editor (I only had the 314, 315 & 507 installed at this time)...

Wierd,
John

andel · Post by **andel** » 29 Aug 2005 10:37

I've just had a look at the 507 - the reliablity was set at 192... try setting it to 0.

Edit: after this they then work

Bloodnok · Post by **Bloodnok** » 04 Sep 2005 20:11

andel wrote:I've just had a look at the 507 - the reliablity was set at 192... try setting it to 0.

Edit: after this they then work

But... setting to 0 is the 'no breakdowns' style, and a high number (above 100) is the 'improved reliability' style. If that's the cause of the crash, why don't all 'improved reliability' vehicles do it?

Post by **Chrill** » 05 Sep 2005 13:56

where do i download them?

MjD · Post by **MjD** » 05 Sep 2005 19:31

http://www.vsr.org.uk/downloads/314_315 ... 8_v0.9.zip

Thats the download page Bloodnok posted halfway down page 1

Matloughe · Post by **Matloughe** » 08 Sep 2005 09:45

i was working in the senario editer yesturday, and i noticed that the 314 crashs Locomotion sometimes too, ecactly the same problem when you hover over it in the editer.

intercity125 · Post by **intercity125** » 20 Sep 2005 08:23

andel wrote:I've just had a look at the 507 - the reliablity was set at 192... try setting it to 0.

Edit: after this they then work

You do this in locotool? If so......how

Cheers!

marcf · Post by **marcf** » 20 Sep 2005 08:34

drag the .dat file for your vehicle onto locotool.exe, this will create an .xml file and a folder with all the sprites, open the .xml in notepad and find the line that says: <variable name="reliability" size="1">n</variable>
and change what ever number is between > </variable to 0

intercity125 · Post by **intercity125** » 20 Sep 2005 09:00

Thanks, Marc! i will try that later on

chevyrider · Post by **chevyrider** » 20 Sep 2005 09:06

Re Intercity 125:
For easy things like reliability, use wrappertool.

How to use.
http://www.tt-forums.net/viewtopic.php?p=353780#353780

And download it from here, after registering.
http://www.locomotion-fanpage.net/forum ... 0&letter=L

intercity125 · Post by **intercity125** » 20 Sep 2005 09:17

I have that thanks!
Those vehicles still crash when using that though, i cant understand why!

I just wonder if it is different setting the reliability manually to 0 with locotool

Breeze646 · Post by **Breeze646** » 10 Apr 2006 03:43

I know this is a dead thread so you don't have to remind me.

Well anyway I used locotool to make reliability 0 because I have a subway and any breakdowns will cause major delays. So I set it to 0 but it still says there like 174 or whatever it was before. So my question is has anyone had succesfully made the reliability 0.

BTW that subway is really important because as soon as it opened my total money doubled in one month. Basicly went from 7 mill to 15 mill.

Thanks

Seelenquell · Post by **Seelenquell** » 10 Apr 2006 04:49

AFAIK you have to re-buy the train to get the wanted reliabilty. but maybe i´m wrong.

Breeze646 · Post by **Breeze646** » 10 Apr 2006 04:52

I know about that but I'm talking about that I edited it about a week ago and there's appulutly no diffence and I went back to loco tool and it said it was 0 but go back to loco and it's still 147 what ever it is.

chevyrider · Post by **chevyrider** » 10 Apr 2006 07:00

Breeze646 wrote:I know about that but I'm talking about that I edited it about a week ago and there's appulutly no diffence and I went back to loco tool and it said it was 0 but go back to loco and it's still 147 what ever it is.

Did you copy the .dat from subfolder "nobreakdown" to " Objdata"folder?
http://www.tt-forums.net/viewtopic.php?p=353780#353780

Breeze646 · Post by **Breeze646** » 12 Apr 2006 02:59

chevyrider wrote:
Breeze646 wrote:I know about that but I'm talking about that I edited it about a week ago and there's appulutly no diffence and I went back to loco tool and it said it was 0 but go back to loco and it's still 147 what ever it is.
Did you copy the .dat from subfolder "nobreakdown" to " Objdata"folder?
http://www.tt-forums.net/viewtopic.php?p=353780#353780

Hmm I don't think so let me check.

What's with the link 2

EDIT: Okay I don't get what you mean.

chevyrider · Post by **chevyrider** » 12 Apr 2006 08:11

Breeze646 wrote:Hmm I don't think so let me check.

What's with the link 2

This could happen to be my manual at the bottom.

Transport Tycoon Forums

[BETA] 314, 315, 507, 508

Who is online