TTO Full Conversion v1.3
Moderator: Graphics Moderators
Try setting the win2k switch on.
EDIT: eheh, someone got here first
EDIT: eheh, someone got here first


In order to protect the visitors of this site,
TTO Full Conversion!
This post has been lol 1337 times.
Right - what happened was - I installed the graphics configurator. And saved when all options were crossed off... silly me.
I am having a major problem though WHY ME?!
I have got it all working, configurator works, music is great, title screen is still blank (no microprose) and switching "miscmods" to "on" is tough as there are a plethora of options for that on the configurator.
I will try and change it via the config file itself.
Here is the problem - Trying to replace the graphics.
I dragged in the new grf files into the configurator. In all there are these -
Fttoc (highest priorety working downwards)
betast
jships
ttosignal
toyland
all of them are selected.
Save... run... the music starts (still blank screen).. press enter and..
Returns to title screen. Does not do anything else.
Not sure what is happening. Inside the zip file there is another zip file containing a png file, an optitle file (whats that for?) a gm00 file (music I presume) and the toyland file.
Thanks for the help again! Its taking me ages to get this right..
Here is my NEW proper config -
[ttdxconfig]
autorenew=off
bribe=on
bridgespeedlimits=off
buildoncoasts=off
buildonslopes=off
cheatscost=off
debtmax=on
disasters=off
diskmenu=on
electrifiedrailway=off
enginespersist=on
enhancegui=off
errorpopuptime=off
eternalgame=off
extpresignals=off
extradynamite=on
fastwagonsell=off
feederservice=on
forceautorenew=off
forcerebuildovl=off
fullloadany=on
generalfixes=on
gotodepot=off
gradualloading=off
keepsmallairport=on
largertowns=off
largestations=on
loadtime=on
longbridges=on
lowmemory=off
mammothtrains=on
manualconvert=off
miscmods=off
moreairports=off
morebuildoptions=off
morecurrencies=off
morehotkeys=off
morenews=off
moretownstats=off
morevehicles=off
moveerrorpopup=off
multihead=off
newagerating=off
newplanes=off
newrvcrash=off
newrvs=off
newships=off
newtrains=off
noinflation=on
nonstop=on
officefood=on
planecrashcontrol=off
planes=off
planespeed=off
plantmanytrees=off
presignals=on
roadvehs=off
rvqueueing=on
saveoptionaldata=off
selectgoods=2
semaphores=off
servint=off
ships=off
showfulldate=off
showspeed=on
signal1waittime=off
signal2waittime=off
signalsontrafficside=off
signcheats=on
spread=off
stableindustry=off
startyear=off
subsidiaries=off
tgractstationexist=off
tgractstations=off
tgractstationsweight=off
tgrfizzydrinksinoptim=off
tgrfizzydrinksinweight=off
tgrfoodinmin=off
tgrfoodinoptim=off
tgrfoodinweight=off
tgrgoodsinoptim=off
tgrgoodsinweight=off
tgrmailinoptim=off
tgrmailinweight=off
tgrmailoutweight=off
tgrpassinmax=off
tgrpassinweight=off
tgrpassoutweight=off
tgrsweetsinoptim=off
tgrsweetsinweight=off
tgrtownsizebase=off
tgrtownsizefactor=off
tgrwaterinmin=off
tgrwaterinoptim=off
tgrwaterinweight=off
towngrowthlimit=off
towngrowthratemax=off
towngrowthratemin=off
towngrowthratemode=off
townminpopulationdesert=off
townminpopulationsnow=off
tracktypecostdiff=off
trainrefit=on
trains=off
unifiedmaglev=off
verbose=on
win2k=on
[info]
//ttdxcversion=2.8.8
//ttdpversion=TTDPatch 2.0 rev 1 (Windows)
//winversion=Windows XP (version 5.1 build 2600) Service Pack 2
I am having a major problem though WHY ME?!
I have got it all working, configurator works, music is great, title screen is still blank (no microprose) and switching "miscmods" to "on" is tough as there are a plethora of options for that on the configurator.
I will try and change it via the config file itself.
Here is the problem - Trying to replace the graphics.
I dragged in the new grf files into the configurator. In all there are these -
Fttoc (highest priorety working downwards)
betast
jships
ttosignal
toyland
all of them are selected.
Save... run... the music starts (still blank screen).. press enter and..
Returns to title screen. Does not do anything else.
Not sure what is happening. Inside the zip file there is another zip file containing a png file, an optitle file (whats that for?) a gm00 file (music I presume) and the toyland file.
Thanks for the help again! Its taking me ages to get this right..
Here is my NEW proper config -
[ttdxconfig]
autorenew=off
bribe=on
bridgespeedlimits=off
buildoncoasts=off
buildonslopes=off
cheatscost=off
debtmax=on
disasters=off
diskmenu=on
electrifiedrailway=off
enginespersist=on
enhancegui=off
errorpopuptime=off
eternalgame=off
extpresignals=off
extradynamite=on
fastwagonsell=off
feederservice=on
forceautorenew=off
forcerebuildovl=off
fullloadany=on
generalfixes=on
gotodepot=off
gradualloading=off
keepsmallairport=on
largertowns=off
largestations=on
loadtime=on
longbridges=on
lowmemory=off
mammothtrains=on
manualconvert=off
miscmods=off
moreairports=off
morebuildoptions=off
morecurrencies=off
morehotkeys=off
morenews=off
moretownstats=off
morevehicles=off
moveerrorpopup=off
multihead=off
newagerating=off
newplanes=off
newrvcrash=off
newrvs=off
newships=off
newtrains=off
noinflation=on
nonstop=on
officefood=on
planecrashcontrol=off
planes=off
planespeed=off
plantmanytrees=off
presignals=on
roadvehs=off
rvqueueing=on
saveoptionaldata=off
selectgoods=2
semaphores=off
servint=off
ships=off
showfulldate=off
showspeed=on
signal1waittime=off
signal2waittime=off
signalsontrafficside=off
signcheats=on
spread=off
stableindustry=off
startyear=off
subsidiaries=off
tgractstationexist=off
tgractstations=off
tgractstationsweight=off
tgrfizzydrinksinoptim=off
tgrfizzydrinksinweight=off
tgrfoodinmin=off
tgrfoodinoptim=off
tgrfoodinweight=off
tgrgoodsinoptim=off
tgrgoodsinweight=off
tgrmailinoptim=off
tgrmailinweight=off
tgrmailoutweight=off
tgrpassinmax=off
tgrpassinweight=off
tgrpassoutweight=off
tgrsweetsinoptim=off
tgrsweetsinweight=off
tgrtownsizebase=off
tgrtownsizefactor=off
tgrwaterinmin=off
tgrwaterinoptim=off
tgrwaterinweight=off
towngrowthlimit=off
towngrowthratemax=off
towngrowthratemin=off
towngrowthratemode=off
townminpopulationdesert=off
townminpopulationsnow=off
tracktypecostdiff=off
trainrefit=on
trains=off
unifiedmaglev=off
verbose=on
win2k=on
[info]
//ttdxcversion=2.8.8
//ttdpversion=TTDPatch 2.0 rev 1 (Windows)
//winversion=Windows XP (version 5.1 build 2600) Service Pack 2
The optitle(opntitle.dat?). The gm00 is the TTO theme midi, and it's the best midi version of it (I think).an optitle file (whats that for?) a gm00 file (music I presume) and the toyland file.
I loaded your config to the TTDPOC, TTDPatch Online Configurator. And turned the doshowintro on. It also added comments to the file. The comments will be removed if you use the TTDX Configurator.
edit: uploaded the file
- Attachments
-
- ttdpatch.txt
- (41.5 KiB) Downloaded 298 times

In order to protect the visitors of this site,
TTO Full Conversion!
This post has been lol 1337 times.
Is there a way that I can send you my game file (with some things like music taken out to reduce size) ?
I just can't get it to run the grf files. Signals, ships, toyland.. all those work (I think, I haven't SEEN them working, but I got no startup errors!).
I enable the ttoc.grf one, and after I get the "invisible" microprose screen, the game shuts down and goes back to my desktop...
Why is it doing that? Enabling dosshowintro has not enabled the microprose screen... at all. I am really irritated by this. I just want to get it running, give everyone who did it a pat on the back. But i MUST be doing something wrong.
Pretty much, this is what I did. And have been at this for days now.
I extracted the TTD game file from the zip. Installed it. Installed the TTDpatch. Run the game, it works fine (gm music).
I install the dxmci.dll, swap the FM files, enable FM in the settings. Run game, works fine, music is good. Microprose screen is there at startup.
Here is where it goes wrong. No matter WHAT graphics configurator I install, the microprose screen dissapears. If I enable the ttoc on the graphics. the game doesnt start at all...
Whats going on?
Huge thanks for the help on this!
I just can't get it to run the grf files. Signals, ships, toyland.. all those work (I think, I haven't SEEN them working, but I got no startup errors!).
I enable the ttoc.grf one, and after I get the "invisible" microprose screen, the game shuts down and goes back to my desktop...
Why is it doing that? Enabling dosshowintro has not enabled the microprose screen... at all. I am really irritated by this. I just want to get it running, give everyone who did it a pat on the back. But i MUST be doing something wrong.
Pretty much, this is what I did. And have been at this for days now.
I extracted the TTD game file from the zip. Installed it. Installed the TTDpatch. Run the game, it works fine (gm music).
I install the dxmci.dll, swap the FM files, enable FM in the settings. Run game, works fine, music is good. Microprose screen is there at startup.
Here is where it goes wrong. No matter WHAT graphics configurator I install, the microprose screen dissapears. If I enable the ttoc on the graphics. the game doesnt start at all...
Whats going on?
Huge thanks for the help on this!
You could use megaupload (google for it). There was another big uploading service but I don't remember the name of it right now.mrbee wrote:Is there a way that I can send you my game file (with some things like music taken out to reduce size) ?
You can see if the graphics are activated from the graphics status window. In game, it's under the game setting button, the second from the left)I just can't get it to run the grf files. Signals, ships, toyland.. all those work (I think, I haven't SEEN them working, but I got no startup errors!).
That sounds bad... what I can think of is that the grf file is not coded properly (I'm quite sure it isn't). If you aren't using the latest beta of TTDP can also cause these problems.I enable the ttoc.grf one, and after I get the "invisible" microprose screen, the game shuts down and goes back to my desktop...
Why is it doing that? Enabling dosshowintro has not enabled the microprose screen... at all. I am really irritated by this. I just want to get it running, give everyone who did it a pat on the back. But i MUST be doing something wrong.
I've never heard that a graphics configurator would cause that kind of problems. Weird.. I uploaded a zip file that contains the fttoc.grf file and newgrfw.cfg. So, try this: make sure your newgrf folder is empty and the grf files back upped, also you might want to back up the newgrfw.cfg. Now, extract the archive to the TTD folder. You should be able to start the game now with TTO graphics.Here is where it goes wrong. No matter WHAT graphics configurator I install, the microprose screen dissapears. If I enable the ttoc on the graphics. the game doesnt start at all...
Whats going on?
No problem, I feel I have to help the users of this setHuge thanks for the help on this!

EDIT: http://ttdpatch.net/src/ for the latest beta of TTDP
- Attachments
-
- up.zip
- (374.89 KiB) Downloaded 300 times

In order to protect the visitors of this site,
TTO Full Conversion!
This post has been lol 1337 times.
You are a God amongst men!! You solved it!
I am not a godly figure, and so I believed that on the TTDpatch site, the icon which said "get latest" actually got you the latest patch..
Turns out it wasn't..
And thats that! Now I have nice original grass and stuff and it all works awesomely! WOAH! AWESOME!
Now all there is left is the train "kirby paul" to be named "chippy" heh heh.
Thanks so much for all this, I know I was a pain. But now I certainly know
what was wrong
But, the Microprose screen still aint coming on, even if I put dosintro on.
Its just a blank screen until I press enter... hmm..
Well, thanks again!!
I am not a godly figure, and so I believed that on the TTDpatch site, the icon which said "get latest" actually got you the latest patch..
Turns out it wasn't..
And thats that! Now I have nice original grass and stuff and it all works awesomely! WOAH! AWESOME!
Now all there is left is the train "kirby paul" to be named "chippy" heh heh.
Thanks so much for all this, I know I was a pain. But now I certainly know
what was wrong

But, the Microprose screen still aint coming on, even if I put dosintro on.
Its just a blank screen until I press enter... hmm..
Well, thanks again!!
to get the intro back, you need to add miscmods.doshowintro on to your config.
Formerly known as r0b0t_b0y2003, robotboy, roboboy and beclawat. The best place to get the most recent nightly builds of TTDPatch is: http://roboboy.users.tt-forums.net/TTDPatch/nightlies/
- jonty-comp
- Tycoon
- Posts: 2542
- Joined: 22 Oct 2005 16:05
- Location: Chesterfield, England
- Contact:
-
- Chief Executive
- Posts: 660
- Joined: 31 May 2004 08:22
Re: tto set v1.2.7
Just a little note, this may very soon be updated with tto gui, and maybe some extra vehicles.
Re:
Yes there's going to be an update
The extra vehicles are probably going to be OpenTTD only but we'll see.

![Pleased :]](./images/smilies/pleased.gif)
The extra vehicles are probably going to be OpenTTD only but we'll see.
You shouldn't ask me. I just ripped these sprites from the TTO grf files.eekee wrote:Mind if I use the monorail graphics from this set in a climate I'm making?


In order to protect the visitors of this site,
TTO Full Conversion!
This post has been lol 1337 times.
-
- Chief Executive
- Posts: 660
- Joined: 31 May 2004 08:22
Re: tto set v1.2.7
Here is a teaser of what we are currently working on.
We still need a name for the bus though.

Update:
A train has been added, the GWR 2301 Class

We still need a name for the bus though.
Update:
A train has been added, the GWR 2301 Class
-
- Chief Executive
- Posts: 660
- Joined: 31 May 2004 08:22
Re: TTO Full Conversion v1.3
Version 1.3 is out, enjoy.
Who is online
Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 20 guests