fasten up local trains' boarding time

Discuss, get help with, or post new graphics for TTDPatch and OpenTTD, using the NewGRF system, here. Graphics for plain TTD also acceptable here.

Moderator: Graphics Moderators

Post Reply
User avatar
Doclouis
Engineer
Engineer
Posts: 81
Joined: 26 May 2003 18:51
Location: Uelzen, Germany
Contact:

fasten up local trains' boarding time

Post by Doclouis »

Hey,
I use Michael Blunck's DB XL set and additionally the RE160 for local trains. Well, what I still haven't found out to change is the speed of boarding. The 125 passenger coaches take ages to unload/load. In addition with the RE160, which requires another engine at the end of the train, the profit of these trains can hardly beat the costs. Still, taking so long for boarding, using local trains doen't really make any sense.
Does anyone know how to increase the speed of boarding in local trains?
:?
RK
Transport Coordinator
Transport Coordinator
Posts: 264
Joined: 13 Oct 2003 10:43
Location: Dortmund, Germany

Post by RK »

You have to drive with the "Regional Express 1" through the Ruhr Area in rush hour and then tell me again about the boardening speed of these vehicles. :D

You should use real local trains like "S-Bahn", which supports instant loading.
michael blunck
Tycoon
Tycoon
Posts: 5954
Joined: 27 Apr 2005 07:09
Contact:

Post by michael blunck »

> I use [...] the RE160

I don´t know anything about that model, so I´m sorry.

> Does anyone know how to increase the speed of boarding in local trains?

As RK already pointed out, you should use DBXL´s local coaches in this case.

The concept of coaches in DBXL is that

- long-distance coaches have a higher capacity but longer loading time,
- special long-distance coaches (like dining-cars) have an even extended loading time,
- local coaches have smaller capacities but shorter loading times,
- special local coaches (like S-Bahn) have an even reduced loading time.

regards
Michael
Image
User avatar
Doclouis
Engineer
Engineer
Posts: 81
Joined: 26 May 2003 18:51
Location: Uelzen, Germany
Contact:

Post by Doclouis »

The RE160 is a stand-alone graphic. I think I got it from the TTD Graphics Site. It's the frontcar for push-pull bilevel trains, has a capacity of 101 passengers and needs a "second" loco for a realistic lookng train.
What I don't understand is the comment of the boarding-speed of different car types. As I figured out, local train cars do really need more time than express cars (!), therefore I fitted onelevel local trains with express cars. Just for the view of having bilevel trains, I use local cars - with the effect of needing about twice as long for boarding than express trains. Maybe I use a wrong switch?
User avatar
Doclouis
Engineer
Engineer
Posts: 81
Joined: 26 May 2003 18:51
Location: Uelzen, Germany
Contact:

Post by Doclouis »

I just checked the loading speed. Trains board with a specific number of passengers per unit of time:
RE160 (101pass): 5
local coaches (125pass): 10
IR/IC: 16
ICE: 14
michael blunck
Tycoon
Tycoon
Posts: 5954
Joined: 27 Apr 2005 07:09
Contact:

Post by michael blunck »

> The RE160 is a stand-alone graphic. [...]

Yes, I think it´s the work of "Bernhard" but I don´t have any information about special compatibility issues (or non-issues) with the DBXL.

> What I don't understand is the comment of the boarding-speed of different car types.

The general scheme is indeed as pointed out above.

> As I figured out, local train cars do really need more time than express cars (!),

Well, technically it could be that any non-DBXL vehicle screw things up ...

As for the original DBXL coaches,

- a "silverfish" (local) of 1960 loads 40 passengers with 10 passengers per "tick", i.e. it needs 4 ticks to load/unload,
- a "Rheingold" (long-distance) of 1960 loads 56 passengers w. 8 per tick, hence it´ll need 7 ticks to fully load/unload.

> Maybe I use a wrong switch?

Check with that RE160 removed.

The new DBXL version includes bi-levels as well.

regards
Michael
Image
User avatar
Doclouis
Engineer
Engineer
Posts: 81
Joined: 26 May 2003 18:51
Location: Uelzen, Germany
Contact:

Post by Doclouis »

cannot wait for the new dbxl-set (as well as for the european buildings set)!!
michael blunck
Tycoon
Tycoon
Posts: 5954
Joined: 27 Apr 2005 07:09
Contact:

Post by michael blunck »

Sorry, I didn´t see your post before sending mine.
Trains board with a specific number of passengers per unit of time:

RE160 (101pass): 5
local coaches (125pass): 10
IR/IC: 16
ICE: 14
In general, local coaches have a capacity of 40 passengers and load 10 passengers per tick. This is considerably faster than for a long-distance coach.

However, loading time depends on year of construction as well: e.g. the "silverfish" local coach of 1960 loads with four ticks but the following models (mint, red) load in two ticks (20 passengers/tick).

The ICE-3 coach (long-distance) loads 28 pass/tick.

You may look up these numbers in the Donotreadme, BTW. 8)

Returning to your original question, it seems that the RE160 uses the default tick load of 5 which is a very small number, yes.

regards
Michael
Image
Post Reply

Return to “Graphics Development”

Who is online

Users browsing this forum: No registered users and 13 guests