AuzObjects

[GarryG]

Yep, you all got it right.

Be a new version updated later today.

Here image of a town local pool I working on. Just need to put some swimmers in it. And a image how the other pool should have looked with the hand rails.

[Lurkmore]

AuzSportObjects

Subject: Looking for ideas.

The Sport Object set only has 8 IDs remaining so looking for ideas to fill them.

It does not mean I can add 10 different sports. Depends how complicated the sports suggest is to how many IDs it will take.

A go-kart track?

[GarryG]

A go-kart track?

Maybe the best way to do those is to make some go-karts that can be used on normal roads Then can use some of the roads to design a go-kart track.
I don't think there is enough room in the AuzSportObjects for anything as only 3 ID left.

I think future sporting objects might have to go in the AuzObjectsAddOns set.

In the mean time:

AuzSportObjects

I fixed the pools by adding the stairs and handrails so people can get out of the pool.
And also finished the swimming pool with people in it including snow versions with people ice skating.

Swimming Pools 4.png (48.14 KiB) Viewed 3430 times

Swimming Pools 3.png (105.66 KiB) Viewed 3430 times

[kamnet]

A go-kart track?

Maybe the best way to do those is to make some go-karts that can be used on normal roads Then can use some of the roads to design a go-kart track.
I don't think there is enough room in the AuzSportObjects for anything as only 3 ID left.

AuzRacing, perhaps?

[GarryG]

AuzRacing, perhaps?

Besides go-karts what else could be put in this set?
Suppose could have Motor Bikes, Bicycles, horses, rally cars as all those did road/street racing.

With the dirt and gravel roads some road sets have could be used to make the race tracks.

One day I'll get my other projects finished.

[GarryG]

As it's end of April and you're planning to work on same set, just want to check if that's possible to do too?
Cheers,
Alan

Had a try at the camera across the roads.

Speed Cameras.png (4.75 KiB) Viewed 3325 times

My idea of the single junction roads not been successful yet. Doing overlaps southerly direction not a problem as vehicle will drive over them. But not been successful with the northerly overlaps. Will try again when the brain gets some more brain wave ideas.

[alan98]

As it's end of April and you're planning to work on same set, just want to check if that's possible to do too?
Cheers,
Alan

Had a try at the camera across the roads.
Speed Cameras.png

It looks really nice, thank you! Probably if you can create mirrored version too, it will be enough to have overlap over two lanes highway.

Cheers,
Alan

[Quast65]

I don't think there is enough room in the AuzSportObjects for anything as only 3 ID left.

If you switch to the most recent version of NML, you dont have any limits anymore regarding the number of Objects in one GRF...

[RoyalExamination9410]

AuzRacing, perhaps?

Besides go-karts what else could be put in this set?
Suppose could have Motor Bikes, Bicycles, horses, rally cars as all those did road/street racing.

With the dirt and gravel roads some road sets have could be used to make the race tracks.

One day I'll get my other projects finished.

Race cars, Ferrari/Lamborghini, Mario Kart (my friend toured Tokyo in one of these recently)

[GarryG]

It looks really nice, thank you! Probably if you can create mirrored version too, it will be enough to have overlap over two lanes highway.

Will make for right and left hand lanes and to cross 4 lanes.

If you switch to the most recent version of NML, you dont have any limits anymore regarding the number of Objects in one GRF...

To do that I need Windows 10 or 11 installed on my computer. I still using Windows 7 and don't plan at this stage to upgrade.

Race cars, Ferrari/Lamborghini, Mario Kart (my friend toured Tokyo in one of these recently)

Just thought of a problem with this. Most road sets have a speed limit and motor bikes and cars would be wanting to exceed those speed limits.

[Quast65]

To do that I need Windows 10 or 11 installed on my computer. I still using Windows 7 and don't plan at this stage to upgrade.

Fair point!

[GarryG]

AuzAutoplaceObjectsV4

This set randomly places objects on your map at the very beginning of your game.

House and Cloud.png (59.42 KiB) Viewed 2841 times

It will randomly place the following objects:
clouds
building ruins
old houses
fishing (in boats)
Canoes (on water)
Crocodiles (In water)
Bee Hives
Windmills
Camping (people with tents and fire)
Horses (people riding)
Dams and Troughs (for livestock)
fallen trees
Australian Gum Trees
Willow Trees
Rangers Towers
Australian Animals
ogfx-landscape Trees
Australian Pine Trees
Australian Mapple Trees
Australian Bottle Trees
Flame Trees
ghost gum
Flowering Gum Trees
Bottle Brush
Wattle Tree

You can not select objects manually and place them.

You can go to "Set parameters" and select which ones you want and don't want to include on your map.

[GarryG]

AuzVansAndMiniBusSet

Much thanks to Bob_Mackenzie, he has given me permission to use some of his vehicle to add to the Van and Mini Bus set.

My main intention is to use his old vehicles and those to suit what I been trying to do.

If you not want to wait then try out his vehicle set called Bob's Random Vehicles and can be found on Bananas.
(He also has some bus sets as well)
or go to his forum at
[OTTD] Bob's Random British Vehicles - v0.9
viewtopic.php?t=48651

[GarryG]

Hi Garry,
As you plan to work on roads
Alan

I'm a bit slow doing the cameras at moment as keep losing concentration what I trying to do.

Here were I up to at moment. Want to get the easy part right first before starting the more complicated pieces.

I see by the image you uploaded there also some cameras on separate poles not far from the gantry.
If I do same could end up like this.

Cameras 1.png (4.28 KiB) Viewed 2578 times

Searching the internet for these in Australia found some which might be ok too.

Cameras 2.png (106.66 KiB) Viewed 2578 times

EDIT:
This how I think cameras 2 would look in the game if I make some of these.

Cameras 3.png (3.91 KiB) Viewed 2540 times

I think these camera ideas would look good as a Road Way Point so if my mate "fridaemon" is watching this and is interested in adding this idea to his way Points let me know.

Cheers

[alan98]

I'm a bit slow doing the cameras at moment as keep losing concentration what I trying to do.

I see by the image you uploaded there also some cameras on separate poles not far from the gantry.
If I do same could end up like this.
Cameras 1.png
Searching the internet for these in Australia found some which might be ok too.
Cameras 2.png

Overhead structure looks amazing, very close to reality, wish to try it in my scenario! If it's possible may the cameras on the poles be a separate object (not tight with overhead structure)? That's because then we can utilize it to use together with overhead structure on the next tile or separately on the highway as not all the time speed control camera is placed on overhead structure.

I think these camera ideas would look good as a Road Way Point so if my mate "fridaemon" is watching this and is interested in adding this idea to his way Points let me know.

Do you plan to add this object(s) in your road object set too?

Cheers,
Alan

[RoyalExamination9410]

Cameras 1.png

Cheers

The structure on the left of this image reminds me of trolleybus infrastructure with the streetlights holding up the trolley wires with the horizontal poles.

Just thought of a problem with this. Most road sets have a speed limit and motor bikes and cars would be wanting to exceed those speed limits.

I thought you had a race track set with no speed limits?

[GarryG]

I been side tracked again and delayed with the cameras.

Had a suggestion about security for our trains to help prevent vandals from defacing them. I already got fences, but no suitable gates for the trains to pass through.

So I made some animated Waypoints where the gates close and open for the trains.
Gates closed.

Security Waypoints1.png (84.06 KiB) Viewed 2381 times

Gates open on approach of a train.

Security Waypoints2.png (71.19 KiB) Viewed 2381 times

If interested in these go to my
Australian Railway Stations
viewtopic.php?p=1269401#p1269401

Cheers

[GarryG]

AuzRoadObjectsV18

Subject: Added Traffic Cameras.

Add several types of Traffic Cameras that can be used in a variety of ways.
There some gantry Cameras that can span 2 or 4 lanes.
Also some cameras on posts. I seen these cameras at traffic light intersections and also to detect speeding, people not wearing seat belts and using their mobile phones.

Cameras 4.png (36.63 KiB) Viewed 2199 times

These are random select objects so just keep clicking to find the one you want.
In the Object Selection Menu you will find them in the Traffic Cameras.

Enjoy.

[alan98]

AuzRoadObjectsV18

Subject: Added Traffic Cameras.

Thank a lot, Garry! They look perfect!

Cheers,
Alan

[GarryG]

Thank a lot, Garry! They look perfect

Glad you like.

Minor adjustment to the purchase menu for the cameras on poles. I added some red arrows to show the direction of the roads.

Purchase menu.png (11.44 KiB) Viewed 2010 times

This might make it a bit easier for everyone to choose what ones they want.

Cheers