[OTTD] Generic Train Renewal Set (Discontinued)

[NekoMaster]

This trains are purely fictional, though we dont have enough electrics atm, which is mainly because nekomaster only draws diesels (I assume hes from North America )

You got me, I do like electrics, but Im from canada, and we have 4 Companies running through Oshawa, Canadian National, CP Rail, VIA, and GO Transit, and at the moment, none run electric trains here, nor do we have trams or subways

But yes, this is all purely Fictional, none of these train exist nor are based off trains, though the styles are influenced by styles of their eras (like diesels from the 40s-60s will have more rounded streamlined bodies)

[colossal404]

Diagonal view of MLD EDP 23 and MLD EDP 23B

[NekoMaster]

Diagonal view of MLD EDP 23 and MLD EDP 23B

You know, if your gonna do a diagonal sprite, Please, please, separate each part so that they can be put into a sprite sheet

But, anyways, nice work

[colossal404]

Of course, I drawn the parts separated, just put them together for the pic.
I don't finish the other diagonal view yet, when i'm done I will post there in a separated sprite sheet.

[NekoMaster]

Of course, I drawn the parts separated, just put them together for the pic.
I don't finish the other diagonal view yet, when i'm done I will post there in a separated sprite sheet.

ok then, btw, could you goto the site and tell me if the list of companies is alright?

[colossal404]

It looks right, but i don't understand why needed to channge all of the company names in each generation at the earlier generations. And the "Renbay" word sounds a bit silly for me.
I think the "Master Locomotive Division" sounds better than the later "Master Locomotive Works", and the shorts is already for the MLD at MLW lines

[NekoMaster]

It looks right, but i don't understand why needed to channge all of the company names in each generation at the earlier generations. And the "Renbay" word sounds a bit silly for me.
I think the "Master Locomotive Division" sounds better than the later "Master Locomotive Works", and the shorts is already for the MLD at MLW lines

Hmm? did I accidentally change it to works instead of Division?

Anyways, what companies should stay? Tesle Diesel, Master and General should stay, also I want Renault Steam to stay too

[colossal404]

In third generation the Hexter was named "Hexter Locomotive and Aerospace" and I think after the aerospace word, the Hexter went out from the train business and goes to aeroplane or someting what need aerodinamics, so in the forth generation the Baywide Renault Works stay with this name, and after go get out from business.
And I think the Targo word need to be changed something with other start character, because when the Tesle and Targo companies were contracted, the short of them were not changed.
And in Canada/USA there isn't any company what named only one word? In Hungary there is a large company what made and service rail vehicles, the Ganz. It's only one word, dont need to short...

[NekoMaster]

In third generation the Hexter was named "Hexter Locomotive and Aerospace" and I think after the aerospace word, the Hexter went out from the train business and goes to aeroplane or someting what need aerodinamics, so in the forth generation the Baywide Renault Works stay with this name, and after go get out from business.
And I think the Targo word need to be changed something with other start character, because when the Tesle and Targo companies were contracted, the short of them were not changed.
And in Canada/USA there isn't any company what named only one word? In Hungary there is a large company what made and service rail vehicles, the Ganz. It's only one word, dont need to short...

Lol, ok, well, VIA is one word, and most people refer to go transit as just GO, like, "Im gonna take a GO Train to toronto, then a Amtrak down to New york"

Ill have the changes done now

Edit : THere, instead of Tesle, its now Carmine, so Tesgo become CarGO Express Locomotive

[colossal404]

Now, that's better for me
And I done with the MLD EDP 23 and MLD EDP 23B

[NekoMaster]

Now, that's better for me
And I done with the MLD EDP 23 and MLD EDP 23B

thanks, i have it saved now, your a big help along with FHS

I hope you both can continue to contribute to the set

Now what should I attempt next? I was thinkin of making either something like the UAC Turbine Train, or maybe a Freight Maglev

[colossal404]

I can't drawn maglevs, so I prefer to draw something else
If you want me to drawn it in some time, choose a freight wagon, or something simple

[NekoMaster]

I can't drawn maglevs, so I prefer to draw something else
If you want me to drawn it in some time, choose a freight wagon, or something simple

Sure, Im going to do what I normally do, though, I got something for ya to try, though your going to have to palet it for me, since its been around in my hard disk for awhile.

ASW_25T_Torpedo_Tanker.png (978 Bytes) Viewed 2394 times

Info...
Name : ASW 60T Torpedo Tanker
Manufacturer : Altona Steel Works
Available : 1940 - 1970
Weight : 60T
Capacity : 45 Tonnes Steel
Note : In real life, this should hold molten iron, not steel.

[colossal404]

Steel in tanker? It's odd for me. Do you have a real picture of it? I can't imagine how it looks, and then I can't draw it...
Oh, I finished the other locomotive what I started to draw...

[NekoMaster]

Steel in tanker? It's odd for me. Do you have a real picture of it? I can't imagine how it looks, and then I can't draw it...
Oh, I finished the other locomotive what I started to draw...

Thanks, thats the first Colossal Train right? the front part? Anyways, its called a Torpedo car, they normally hual Molten iron from the foundry to the Steel mill, usually not a long distance, but it still has to be insulated.

http://upload.wikimedia.org/wikipedia/c ... do_car.jpg
(edit:sorry for the large pic)

Though, I should have remebered this, the sprite should no only be longer, but it needs at least 4 2 Axle Trucks, if you can could you do that for me please

[colossal404]

Umm, this is soo large! Your's is a smaller version or what?
That is the front and the back part of the colossal loco, just need to mirror them.

Though, I should have remebered this, the sprite should no only be longer, but it needs at least 4 2 Axle Trucks, if you can could you do that for me please

I dont know what do you want to say with this, my englisht isn't perfect...

[NekoMaster]

Umm, this is soo large! Your's is a smaller version or what?
That is the front and the back part of the colossal loco, just need to mirror them.

Though, I should have remebered this, the sprite should no only be longer, but it needs at least 4 2 Axle Trucks, if you can could you do that for me please

I dont know what do you want to say with this, my englisht isn't perfect...

Sorry about the pic, its a link from google images, I didnt expect it to be so big.

anyways, basically, could you (1) Make sure its in openttd Pallet (2) Make it longer (3) Make sure it has 4 Trucks with 2 Axles each, though, at that size, its gonna have to be not only multi part, its gonna have to be heavier and carry more

[colossal404]

Could you make sure its in openttd Pallet
Yes, it is in OTTD pallet.
Could you make it longer
Yes.

Clipboard05.png (1.02 KiB) Viewed 2388 times

Could you make sure it has 4 Trucks with 2 Axles each
The "truck" means what in this situation? In that size what I drawn, the wagon needs to cut 2 parts.

And can you edit your comment with that large pic and replace the [ img][ /img] to [ url][ /url]? (of course, without spacebars)

[NekoMaster]

Could you make sure its in openttd Pallet
Yes, it is in OTTD pallet.
Could you make it longer
Yes.

Clipboard05.png

Could you make sure it has 4 Trucks with 2 Axles each
The "truck" means what in this situation? In that size what I drawn, the wagon needs to cut 2 parts.

And can you edit your comment with that large pic and replace the [ img][ /img] to [ url][ /url]? (of course, without spacebars)

Thanks, yes I know it needs to be cut in 2, or, a little more complcated, in 3, that way it looks a bit better then haveing the tanke split in two

[END][ - TANK - ][END]

[colossal404]

Well, that's a nice idea, but the tank is the longest thing on that, so we have to cut the end of the tank if we want to be in 3 parts.