enabling multiple newgrf engine sets
Moderator: OpenTTD Developers
-
- Transport Coordinator
- Posts: 283
- Joined: 29 Nov 2014 23:23
enabling multiple newgrf engine sets
Which setting corresponds to engaging multiple newgrf engine sets? I wish to buy some aircraft that aren't revealed in the purchase list. I have another game (world) with the same newgrf aircraft sets in the same order as well, but when activated the same way in the current world I get the fatal prompt as shown in the following screenshot; its peculiarity mystifies me!
- Attachments
-
- 20190111_152524.png (65.22 KiB) Viewed 2610 times
Re: enabling multiple newgrf engine sets
It may be refering to this
https://wiki.openttd.org/Settings/Dynamic_Engines
In short, check your openttd.cfg file (User/documents/OpenTTD/... on Windows), search for dynamic_engines and change it to TRUE if already is not.
https://wiki.openttd.org/Settings/Dynamic_Engines
In short, check your openttd.cfg file (User/documents/OpenTTD/... on Windows), search for dynamic_engines and change it to TRUE if already is not.
-
- Transport Coordinator
- Posts: 283
- Joined: 29 Nov 2014 23:23
Re: enabling multiple newgrf engine sets
Hmmm..thank you, but my dynamic_engines has indeed been set to true all along.Sunmannus wrote:It may be refering to this
https://wiki.openttd.org/Settings/Dynamic_Engines
In short, check your openttd.cfg file (User/documents/OpenTTD/... on Windows), search for dynamic_engines and change it to TRUE if already is not.
Re: enabling multiple newgrf engine sets
Then it s because you are using an old savegame which did not have dynamic_engine true
It s very probably saved into the savegame, so changing your cfg won t change it.
the solution is to open the savegame ingame, then to open console and to type : set dynamic_engine true (or maybe it s "on", or 0/1, not sure, you ll find out i m sure )
It s very probably saved into the savegame, so changing your cfg won t change it.
the solution is to open the savegame ingame, then to open console and to type : set dynamic_engine true (or maybe it s "on", or 0/1, not sure, you ll find out i m sure )
-
- Transport Coordinator
- Posts: 283
- Joined: 29 Nov 2014 23:23
Re: enabling multiple newgrf engine sets
You must be right. I downloaded the scenario (as in-game content). I get the error message, however, per the screenshot below. How do you players familiarise yourselves with commands via the console? Might there be guide sheets to refer to, or must being some tech wizard be necessary to use it at will for stuff other than calling up that errrr Cheats panel? At any rate I much appreciate what you've just happened to have taught me..I shan't forget that tip.
- Attachments
-
- 20190111_200400.png (424.66 KiB) Viewed 2560 times
Re: enabling multiple newgrf engine sets
Well i m still not so familiar with commands on the console so no need to become a tech wizard to use it
there is a list of commands here wich might help : https://wiki.openttd.org/Console_Commands
and one more that seems to be missing from that list but that i find very handy mainly to tweak some pathfinding penalties when i need to : list_settings pf.yapf.rail (list_settings alone works too, but the list is quite big).
there is a list of commands here wich might help : https://wiki.openttd.org/Console_Commands
and one more that seems to be missing from that list but that i find very handy mainly to tweak some pathfinding penalties when i need to : list_settings pf.yapf.rail (list_settings alone works too, but the list is quite big).
Re: enabling multiple newgrf engine sets
Which scenario did you download?
Do you like drones, quadcopters & flying toys? Check out Drone Strike Force!
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
-
- Transport Coordinator
- Posts: 283
- Joined: 29 Nov 2014 23:23
Re: enabling multiple newgrf engine sets
Why do you ask? Several years later now, I'm once again playing the UK v.3 scenario afresh, because I had *#@%£!× accidentally deleted my saved games back then..that stupidity of mine stung me awfully.kamnet wrote:Which scenario did you download?
Aha! ^^ bookmarked and bookmarked..thank you. Do you know whether there be any guidance out there on pathfinder penalty flags, or do you just try it by way of trial and error? I have no idea how to combine path signals and plain signals together, my trains always became lost, such that I've never bothered trying those priority signalling tips written about over at ottdwiki. I'm satisfied with how my trains find their ways, although how they steadfastly lock onto platforms can trouble me, plus how they don't use a freed, unobstructed, parallel adjacent track (4-tracking) to continue onward to the waypoint just beyond some dismissed station has now come to puzzle me.romazoon wrote:Well i m still not so familiar with commands on the console so no need to become a tech wizard to use it
there is a list of commands here wich might help : https://wiki.openttd.org/Console_Commands
and one more that seems to be missing from that list but that i find very handy mainly to tweak some pathfinding penalties when i need to : list_settings pf.yapf.rail (list_settings alone works too, but the list is quite big).
Re: enabling multiple newgrf engine sets
Looking to see if I can find a fix for your issue. As it is, somebody the other day needed help with this scenario and I uploaded an update to this scenario with some basic vehicles, but I didn't catch any errors. Opening it again, there is indeed the same error. Opening the console and running "set dynamic_engine true" fixed the problem, and I have no errors upon starting the scenario.trainrover wrote:Why do you ask? Several years later now, I'm once again playing the UK v.3 scenario afresh...kamnet wrote:Which scenario did you download?
Do you like drones, quadcopters & flying toys? Check out Drone Strike Force!
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
Base Music Sets: OpenMSX | Scott Joplin Anthology | Traditional Winter Holiday Music | Modern Motion Music
Other Projects: 2CC Trams | Modern Waypoints | Sprite Sandbox & NewGRF Releases | Ideabox | Town Names | Isle of Sodor Scenario | Random Sprite Repository
Misc Topics: My Screenshots | Forgotten NewGRFs | Unfinished Graphics Sets | Stats Shack | GarryG's Auz Sets
-
- Transport Coordinator
- Posts: 283
- Joined: 29 Nov 2014 23:23
Re: enabling multiple newgrf engine sets
I remember a few years ago when multiple engine sets was a primary setting..I miss its being readily available. Running that through the console at the outset of a scenario, however, is nonetheless a handy tip..I wonder what other ones might also be worthwhile!
Who is online
Users browsing this forum: No registered users and 16 guests