[WIP/REL/HQ] Older US freight / passenger cars

Discuss, get help with, or post new modifications, graphics or related tools for Locomotion in this forum.

Moderator: Locomotion Moderators

Good or bad idea?

Yes, definitely :D
76
90%
Oh well... :|
8
10%
 
Total votes: 84

SkyNet
Traffic Manager
Traffic Manager
Posts: 134
Joined: 13 Apr 2006 15:11
Location: Germany
Contact:

Post by SkyNet »

yeah this kind of train is allready made by plastikman und can be found in his amtrak pack ...

i was still wondering, becaus here in gemrany most of the trains ( steel, coal e.g. ) have som electric locos at the front ... :)
Hula121
Engineer
Engineer
Posts: 93
Joined: 11 Nov 2006 22:32
Location: Hanamaru Ranch, Montana

Post by Hula121 »

In the USA, the majority of the lines are not electrified. The country is so vast, that it'd be impractical to electrify every mile of rail line out there.

That said, the part of the country I live in had some electrified lines back in the early-to-mid 20th Century; operated by The Milwaukee Road and the Butte, Anaconda & Pacific. Both railroads ran passengers and freight under electric power.
Image
Hanamaru Navigation Group
Transit - Anime - Gaming
User avatar
Jose
Director
Director
Posts: 542
Joined: 07 Jan 2005 04:15
Location: Central Coast, NSW, Australia

Post by Jose »

There is 228,464 kilometres of rail in the US, could you imagine the cost of electrification. There are no new electirc freight US locos, there are a few older ones.
As Hula121 said there are some rather spectacluar ones that ran on the Milwaukee Road, I have released one electric boxcab already. Ones i would like to release in the future would be EP2 Bi-Polar, Little Joe and a EP5.
SkyNet
Traffic Manager
Traffic Manager
Posts: 134
Joined: 13 Apr 2006 15:11
Location: Germany
Contact:

Post by SkyNet »

hm .. ever see the movie al gore did ? :roll:

ok thx for answering my question ... :)
User avatar
Jose
Director
Director
Posts: 542
Joined: 07 Jan 2005 04:15
Location: Central Coast, NSW, Australia

Post by Jose »

Well i know that US railroads are a major contributer to global warming, BNSF Railroad is the single largest consumer of fossil fuels per day. Even here in Australia we have recently phased out electric freight locos, dont know why thought.
User avatar
scpk2000
Traffic Manager
Traffic Manager
Posts: 214
Joined: 06 Jul 2006 13:47
Location: USA-Arizona

Post by scpk2000 »

From what I understand General Electro has built and released into production an Enviro Friendly Freight Engin w/in the last couple of years.
ilovetrainz
Engineer
Engineer
Posts: 58
Joined: 22 Nov 2006 18:16

Post by ilovetrainz »

Yes, they even say that they're making a new, environmentally friendly loco, which lowers emissions by about 15%, to find out more, go check out their site, GEtransportation.com
Zack
Hula121
Engineer
Engineer
Posts: 93
Joined: 11 Nov 2006 22:32
Location: Hanamaru Ranch, Montana

Post by Hula121 »

This company makes hybrid locomotives used for switching.
Image
Hanamaru Navigation Group
Transit - Anime - Gaming
User avatar
NitrousX
Transport Coordinator
Transport Coordinator
Posts: 378
Joined: 17 Oct 2006 07:37
Location: The Netherlands

Post by NitrousX »

In Europe we use the modified Alstom V100 locomotives (ex DR V100), they have recently been testing with a hybrid model for shunting and tunnel maintenance, it was featured at the Innotrans show.

It also has a regular diesel for main line purposes.
Attachments
Alstom V100
Alstom V100
Alstom v100.jpg (41.19 KiB) Viewed 3882 times
User avatar
scpk2000
Traffic Manager
Traffic Manager
Posts: 214
Joined: 06 Jul 2006 13:47
Location: USA-Arizona

Post by scpk2000 »

I have this pack and it looks great and it's nice to see the additional steamer locos for US trains, but the question is I have is will there be an updated to the steamers where the parts move? I dunno if this is being addressed or not and just wanted to ask.
User avatar
Jose
Director
Director
Posts: 542
Joined: 07 Jan 2005 04:15
Location: Central Coast, NSW, Australia

Post by Jose »

I am going to resize them soon, and i think i might check out a way to animate them as well (no Promises).
User avatar
scpk2000
Traffic Manager
Traffic Manager
Posts: 214
Joined: 06 Jul 2006 13:47
Location: USA-Arizona

Post by scpk2000 »

Jose wrote:I am going to resize them soon, and i think i might check out a way to animate them as well (no Promises).
Well it would be nice to see that.
RTek
Engineer
Engineer
Posts: 32
Joined: 19 Nov 2006 19:14
Location: Should Be Pittsburgh, PA, but it ain't, It's State College, PA
Contact:

Post by RTek »

Jose wrote:I am going to resize them soon, and i think i might check out a way to animate them as well (no Promises).
Hey, I say go for it. I would love to see that. Even if it's just two frames (rods up/rods down) it would be really cool!

BTW, Jose, how did you get the boxcars to hold grain, paper OR goods? I just tried a few and they came out holding paper AND goods. Not what I wanted to do.
Long live ALCo!
User avatar
Jose
Director
Director
Posts: 542
Joined: 07 Jan 2005 04:15
Location: Central Coast, NSW, Australia

Post by Jose »

Hi Rtek, what i did was edit the Xml manually without Vehicle creator,
Add this for grain, paper and goods

Code: Select all

<cargotype id="8">0</cargotype>
<cargotype id="5">0</cargotype>
<cargotype id="1">0</cargotype>
I think there is a list of cargo id's out there somewhere, i found mine my checking each cargos xmls's. i wrote them on a piece of paper which is now lost.
User avatar
chevyrider
Tycoon
Tycoon
Posts: 3285
Joined: 16 Sep 2004 09:52
Location: Amersfoort The Netherlands

Post by chevyrider »

-
-
39 years experience with trains and still driving.
-
-
RTek
Engineer
Engineer
Posts: 32
Joined: 19 Nov 2006 19:14
Location: Should Be Pittsburgh, PA, but it ain't, It's State College, PA
Contact:

Post by RTek »

Thanks chevyrider. I was trying to make some oil-only and chemicals-only cars, but it looks like that's not gonna be possible without new cargoes.

Catch is, how then do the oil rigs/wells and chemical plants produce just oil or chemicals?
Long live ALCo!
SkyNet
Traffic Manager
Traffic Manager
Posts: 134
Joined: 13 Apr 2006 15:11
Location: Germany
Contact:

Post by SkyNet »

shoirt question ... is the download down ? can't find it on ami->downloads !?
User avatar
Jose
Director
Director
Posts: 542
Joined: 07 Jan 2005 04:15
Location: Central Coast, NSW, Australia

Post by Jose »

I dont know about that but there will be a new download soon with all the stuff on that i didnt release. I have just been a bit lazy the last couple of months.
SkyNet
Traffic Manager
Traffic Manager
Posts: 134
Joined: 13 Apr 2006 15:11
Location: Germany
Contact:

Post by SkyNet »

cool ... cant wait ;)
andel
Retired Moderator
Retired Moderator
Posts: 7266
Joined: 07 May 2005 20:20
Location: Up front

Post by andel »

SkyNet wrote:shoirt question ... is the download down ? can't find it on ami->downloads !?
Might be my fault - lemme look into it - i've had to do some serious server work of late...
Andel
Quis custodiet ipsos custodes?
DISCLAIMER: The views expressed in this post are not necessarily those of Andel, who will do and say almost anything to get the attention he craves.
[/size]
Post Reply

Return to “Locomotion Graphics, Modifications & Tools”

Who is online

Users browsing this forum: No registered users and 9 guests