ECS vectors v1.1.2 (by George) 19/06/2011

Discuss, get help with, or post new graphics for TTDPatch and OpenTTD, using the NewGRF system, here. Graphics for plain TTD also acceptable here.

Moderator: Graphics Moderators

Do you use ECS with TTDP?

I use ECS under TTDP
5
3%
I use ECS under TTDP and OTTD
6
4%
I use ECS under OTTD
158
93%
 
Total votes: 169

User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Zimmlock wrote:
Metek wrote:I found a small bug in the drawing of a coal mine. It might be an alignment bug because the station is located higher (on a hill) than the coal mine.
Its not a alignment bug, its because your station is situated a level highter.
and this part is located on the stations tile
Image Image Image Image
User avatar
Hamilton2007
Transport Coordinator
Transport Coordinator
Posts: 289
Joined: 16 Nov 2008 10:57
Location: Belgium

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Hamilton2007 »

Does all of the other vector's work if you not selected the Machinery one ?

Cause my Chemical Factory's don't produce anything.

All the rest works fine.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Hamilton2007 wrote:Does all of the other vector's work if you not selected the Machinery one ?
yes
Hamilton2007 wrote:Cause my Chemical Factory's don't produce anything.
And do you support it witch materials? If yes, provide a savegame, please.
Image Image Image Image
User avatar
Hamilton2007
Transport Coordinator
Transport Coordinator
Posts: 289
Joined: 16 Nov 2008 10:57
Location: Belgium

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Hamilton2007 »

George wrote:
Hamilton2007 wrote:Does all of the other vector's work if you not selected the Machinery one ?
yes
Hamilton2007 wrote:Cause my Chemical Factory's don't produce anything.
And do you support it witch materials? If yes, provide a savegame, please.
It doesn't need materials in my game.
Attachments
JUL Transport, 7 Mrt 1923.png
(233.78 KiB) Downloaded 109 times
User avatar
Hamilton2007
Transport Coordinator
Transport Coordinator
Posts: 289
Joined: 16 Nov 2008 10:57
Location: Belgium

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Hamilton2007 »

I found the solution. I think that Pikka's industry GRF's conflict with the ECS ones. So i unloaded the Pikka's ones.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Hamilton2007 wrote:I found the solution. I think that Pikka's industry GRF's conflict with the ECS ones. So i unloaded the Pikka's ones.
In OTTD put Pikka's industries before ECS industries. At least fast test show that they do work.
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

George wrote:
Hamilton2007 wrote:I found the solution. I think that Pikka's industry GRF's conflict with the ECS ones. So i unloaded the Pikka's ones.
In OTTD put Pikka's industries before ECS industries. At least fast test show that they do work.
Albeit with a few oddities in some places... I tried it once and got odd result when using all vectors.

George, are there any paramaters for the ECS Houses, or is it just an as is grf?
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:
George wrote:
Hamilton2007 wrote:I found the solution. I think that Pikka's industry GRF's conflict with the ECS ones. So i unloaded the Pikka's ones.
In OTTD put Pikka's industries before ECS industries. At least fast test show that they do work.
Albeit with a few oddities in some places...
What exactly?
Gremnon wrote: tried it once and got odd result when using all vectors.
What was odd?
Gremnon wrote:George, are there any paramaters for the ECS Houses, or is it just an as is grf?
What parameters do you expect?
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

I wasn't expecting any paramaters actually, I was just curious - since unlike the vectors.... at least last time I checked, it doesn't have a page.

I'll find out my copy of PBI and the UKRS Brick Chain and create a full list of oddities when both used for you.

Edit: Attached file with the list off odds. Used cargodest branch he8feed1a, 22 Nov ECS Vectors and PBI + UKRS Brick Chain 1.5
Attachments
ECS-PBI_odds.txt
list of ECS/PBI odds, for PBI loaded both before and after ECS.
(679 Bytes) Downloaded 85 times
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:I wasn't expecting any paramaters actually, I was just curious - since unlike the vectors.... at least last time I checked, it doesn't have a page.
Because it requires heavy reworking.
Gremnon wrote:the list off odds:
PBI and UKRS Brick Chain loaded above ECS
PBI Sawmill - also produces Wood Products
Isn't it producing lumber without ECS? So, the only difference is changing the cargo name :wink:
Gremnon wrote:PBI Factory - requires Wood/Refined Products
Refined products instead of plastic. Does it change something during gameplay? Different wagons for example?
Gremnon wrote:PBI Brewery - requires Cereals
Instead of grain? No change, only the name is :wink:
Gremnon wrote:PBI Brickworks - requires Vehicles
Instead of gravel?
Gremnon wrote:PBI Clay Pit - requires Vehicles
Produces?
Gremnon wrote:PBI and UKRS Brick Chain loaded below ECS
Wood Products replaced with Lumber
No problem here
Gremnon wrote:ECS Oil Refinery produces only Fuel Oil
ECS Chemical Plant requires nothing
This is bad
Gremnon wrote:ECS Brickworks produces nothing
This is bad
Gremnon wrote:ECS Lime Quarry produces and requires nothing
This is bad
Gremnon wrote:Vehicle accepting industries no longer accept vehicles (though possibly because Vehicles factory isn't defined)
What does it mean not defined?
Gremnon wrote:PBI Factory requires Plastic
PBI Oil Refinery produces Plastic (in addition to Fuel Oil)
Isn't it intended?
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

Ah, that was just a list of everything different I could find.

All the cargos can be transported normally, provided a vehicle set that supports them is loaded.

As to the vehicles, there's not vehicle factory, nor any mention of vehicles, I think what's happening is the UKRS Brick Chain is overriding one of the ECS Vectors.

On the one you asked produces, it produces as normal, I just listed only the differences to normal behavious.
I'll run another test without the Brick Chain and repeat, see if there's any more oddities.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:Ah, that was just a list of everything different I could find.
All the cargos can be transported normally, provided a vehicle set that supports them is loaded.
As to the vehicles, there's not vehicle factory, nor any mention of vehicles, I think what's happening is the UKRS Brick Chain is overriding one of the ECS Vectors.
On the one you asked produces, it produces as normal, I just listed only the differences to normal behavious.
I'll run another test without the Brick Chain and repeat, see if there's any more oddities.
As I can see from your post, if you do not use Brick chain it works quite well if PBI is loaded first
As for Brick chain I'd suggest Pikka to use slot 11 for gravel (to replace sand) and slot 1E for clay (to replace limestone)
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

Without the Brick Chain, PBI loaded above the ECS Vectors appears to work normally. Below, however, I got the following:

Lime Quarry still produces nothing, but acceps Vehicles again
Chemical Plant still requires nothing
Oil Refinery still produces only Fuel Oil

So as far as I can tell, the best way to use both at once is to use PBI above all ECS Vectors, and not use the Brick Chain at all, at the moment

Edit: Also found the source of the default factory appearing while ECS Vectors loaded alone - if the bit on the Basic Vector is set to allow default industries, the default will appear.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:Edit: Also found the source of the default factory appearing while ECS Vectors loaded alone - if the bit on the Basic Vector is set to allow default industries, the default will appear.
Basic? Provide you config, please!
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

My mistake on that, got the Vectors confused. Town Vector, not basic, namely, the first paramater:

Code: Select all

Disable (0, default) / Enable (1) default cargoes 
If it's set to 1, the default factory appears, with 0, it doesn't.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:My mistake on that, got the Vectors confused. Town Vector, not basic, namely, the first paramater:

Code: Select all

Disable (0, default) / Enable (1) default cargoes 
If it's set to 1, the default factory appears, with 0, it doesn't.
Updated wiki.
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

Bug report, Contruction Vector.
In OTTD, if the modify production values cheat is on, the Brickwork's production can be modified. Not sure if that's intended or not.

The brickworks also don't accept coal... although that might just be because I only just started a new game.
User avatar
George
Tycoon
Tycoon
Posts: 4364
Joined: 16 Apr 2003 16:09
Skype: george-vb
Location: Varna, Bulgaria
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by George »

Gremnon wrote:Bug report, Contruction Vector.
In OTTD, if the modify production values cheat is on, the Brickwork's production can be modified. Not sure if that's intended or not.
The brickworks also don't accept coal... although that might just be because I only just started a new game.
Please provide a savegame where brickworks don't accept coal
Image Image Image Image
User avatar
Gremnon
Tycoon
Tycoon
Posts: 1517
Joined: 16 Sep 2005 12:23
Skype: the_gremnon
Location: /home
Contact:

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Gremnon »

Will do when I get back from work on a clean trunk rather than my custom build.
The actual industry says it does, the station doesn't - though I suspect that might just be because it's a new game.
Rista
Engineer
Engineer
Posts: 7
Joined: 08 Dec 2008 00:09
Location: Croatia

Re: ECS implementation by George: ECS vectors. Beta 5 25/10/2008

Post by Rista »

I love the whole idea behind ECS vectors, it totally changed the way I play the game.

However, there is one thing I'm not sure whether it's a feature or I'm doing something wrong. Coal mines seem to be hyperactive in my game! I get 1000+t coal mines very early in the game. It wouldn't be that bad if I had nowhere to transport all that coal to but I do. The power plant seems to accept very large (infinite?) amounts of coal. My friend and I are trying to set up a long term multiplayer game and this kind of makes it get boring quickly.

So what I'm asking is, is this the way ECS vectors are supposed to work? Iron mines produce half as much and it's still a lot. Is there any way to lower the production amounts or that's just the way it is? Thanks.
Post Reply

Return to “Graphics Development”

Who is online

Users browsing this forum: Amazon [Bot] and 10 guests