Royal train Overkill

Illegal_Alien · Post by **Illegal_Alien** » 27 Mar 2007 15:41

http://img231.imageshack.us/img231/74/k ... 50bzm8.jpg

Usualy only 2 engines

(Wasnt the queen though but the minister of traffic and waterthings.)

DeletedUser21 · Post by **DeletedUser21** » 27 Mar 2007 15:44

My dad thinks that it is because if 1 loc is sabotaged that there are still others to take over.

It will have a lot of power tough.

Griff · Post by **Griff** » 27 Mar 2007 15:46

lol, interesting that. All those locos and only one carriage.
Though its not as nice as the British one, IMHO
http://upload.wikimedia.org/wikipedia/c ... ...DWL.JPG

DeletedUser21 · Post by **DeletedUser21** » 27 Mar 2007 15:50

3 carriages to be exact.

Griff · Post by **Griff** » 27 Mar 2007 15:51

Oh yeah...
They looked like locos at first glance.

NitrousX · Post by **NitrousX** » 27 Mar 2007 16:07

About 12000 kilowatts of power (4000/5000 each)

And that for 3 wagons

Illegal_Alien · Post by **Illegal_Alien** » 27 Mar 2007 16:14

Well, what i do know that if they would have all the pantographs up the catenary would melt

Post by **Dave** » 27 Mar 2007 17:08

British Royal Train is Top/Tailed, as are most railtours.

It's in case one of the engines fails.

Ameecher · Post by **Ameecher** » 27 Mar 2007 17:10

And also for when it heads off branch lines which don't have run round loops. That way it can head back out without a problem.

Visscher · Post by **Visscher** » 27 Mar 2007 17:17

Normally the dutch royal train also has top/tail engines, this train has two extra engines, suspect it to be a transfer.

chevyrider · Post by **chevyrider** » 27 Mar 2007 17:28

Illegal_Alien wrote:Well, what i do know that if they would have all the pantograph's up the catenary would melt

Only one Lok 1600 can pull at the same time.
In multiple use, like 2 X DDAR there is only one of the two electro engines working per lok.
Due the 1800 V dc system, 3 fully accelerating loks will pull down the voltage of the catenary under neath 1000 V.
On that moment the system goes down for some seconds, till everybody takes back power needs.

Post by **Dave** » 27 Mar 2007 17:28

It might be an ECS move, in which case (at least in Britain) some locos are hauled DIT or DOR (Dead in Transit or Dead on Rear) to move them around without the need to take up a costly part of the timetable.

SM9T8 · Post by **SM9T8** » 27 Mar 2007 18:19

jpmaster wrote:lol, interesting that. All those locos and only one carriage.
Though its not as nice as the British one, IMHO
http://upload.wikimedia.org/wikipedia/c ... ...DWL.JPG

I thought the British Royal Train was axed

Purno · Post by **Purno** » 27 Mar 2007 18:34

Mr. X wrote:3 carriages to be exact.

e-loc | Carriage | Royal Coach | Carriage | e-loc | e-loc | e-loc

As additional information, these carriages are first class carriages. b******, second class are already comfy enough.

Hyronymus · Post by **Hyronymus** » 27 Mar 2007 19:43

I suspect the 4 engines are required to run at some speed at all under 25kV engines. After all, these engines are able yo tun on 1500V only.

andel · Post by **andel** » 27 Mar 2007 20:42

Emohawk wrote:
jpmaster wrote:lol, interesting that. All those locos and only one carriage.
Though its not as nice as the British one, IMHO
http://upload.wikimedia.org/wikipedia/c ... ...DWL.JPG
I thought the British Royal Train was axed

Runs under contract with EWS with two class 67's running with MK3s.

Post by **uzurpator** » 28 Mar 2007 10:38

Illegal_Alien wrote:http://img231.imageshack.us/img231/74/k ... 50bzm8.jpg

Usualy only 2 engines (Wasnt the queen though but the minister of traffic and waterthings.)

Typical consist in TTD for many players. What is the problem?

WWW · Post by **WWW** » 04 Apr 2007 07:22

andel wrote: Runs under contract with EWS with two class 67's running with MK3s.

I was under the impression that there was a MK2 in there as well? or am I wrong?

Pookey · Post by **Pookey** » 04 Apr 2007 07:37

uzurpator wrote:
Illegal_Alien wrote:http://img231.imageshack.us/img231/74/k ... 50bzm8.jpg

Usualy only 2 engines (Wasnt the queen though but the minister of traffic and waterthings.)
Typical consist in TTD for many players. What is the problem?

The oddness is that it's not...common for that sort of thing in real life.

NitrousX · Post by **NitrousX** » 04 Apr 2007 14:00

chevyrider wrote:
Illegal_Alien wrote:Well, what i do know that if they would have all the pantograph's up the catenary would melt
Only one Lok 1600 can pull at the same time.
In multiple use, like 2 X DDAR there is only one of the two electro engines working per lok.
Due the 1800 V dc system, 3 fully accelerating loks will pull down the voltage of the catenary under neath 1000 V.
On that moment the system goes down for some seconds, till everybody takes back power needs.

And when that happens with a new IRM regirunner consist the relaisbox goes mad and the whole thing goes up into smoke like a couple of weeks ago

Transport Tycoon Forums

Royal train Overkill

Royal train Overkill

Re: Royal train Overkill

Re: Royal train Overkill

Who is online