Need help with altering ECS construction vector
Posted: 30 Apr 2010 18:33
Hi,
i have a problem with the ECS vectors, especially the "construction" part.
I've built a furniture factory and a constructions industry, both connected to one station.
If i supply the station with wood products, the constructions industry immediately soaks up everything - leaving no wood for the furniture factory.
I want to make sort of a cap for the wood products my constructions industry will accept, so the rest goes into the factory.
In ECSConstw.nfo this part can be found somewhere below the point where the data on constructions industry starts:
1703 * 55 0C 0C " Write R0 to IR4[0-1], R1 to IR4[2-3], R2 to IR5[0-1]"
1704 * 69 02 0A 70 89 7D 02 20 FF FF 00 00 \2+ 7C 05 20 00 00 FF FF 10 1A 20 05 00 00 00 0F 7D 01 20 FF FF
00 00 \2* 1A 20 00 00 01 00 \2+ 7D 00 20 FF FF 00 00 10 1A 00 04 00 00 00 01 70 00 00 00 00 00 00
00 00 00 70 00
Here - as I understand - IR5[0-1] defines how much wood products will be accepted. I did some tempering with these values but without knowing what is what it's pretty hopeless.
Maybe it's also the totally wrong place to do this... I have no clue where to alter the data to make the fixed wood cap.
So.. anyone can help me with this problem?
Regards,
alb22
i have a problem with the ECS vectors, especially the "construction" part.
I've built a furniture factory and a constructions industry, both connected to one station.
If i supply the station with wood products, the constructions industry immediately soaks up everything - leaving no wood for the furniture factory.
I want to make sort of a cap for the wood products my constructions industry will accept, so the rest goes into the factory.
In ECSConstw.nfo this part can be found somewhere below the point where the data on constructions industry starts:
1703 * 55 0C 0C " Write R0 to IR4[0-1], R1 to IR4[2-3], R2 to IR5[0-1]"
1704 * 69 02 0A 70 89 7D 02 20 FF FF 00 00 \2+ 7C 05 20 00 00 FF FF 10 1A 20 05 00 00 00 0F 7D 01 20 FF FF
00 00 \2* 1A 20 00 00 01 00 \2+ 7D 00 20 FF FF 00 00 10 1A 00 04 00 00 00 01 70 00 00 00 00 00 00
00 00 00 70 00
Here - as I understand - IR5[0-1] defines how much wood products will be accepted. I did some tempering with these values but without knowing what is what it's pretty hopeless.
Maybe it's also the totally wrong place to do this... I have no clue where to alter the data to make the fixed wood cap.
So.. anyone can help me with this problem?
Regards,
alb22