Transport Tycoon Forums

Hungarian Diesel Pack 1.0 released.

Contents:

DMUs: Bzmot with Bzx coach, Desiro.
Shunters: MAV M42, M43, M44, M47.
Universal locomotives: M40, M41, M63.

M63 retired about 15 years ago, the others are still in service.

Kikko wrote:Diesel pack is withdrawned for today, because I noticed that M63 001 darkside has the same color with secondary company color.
But an another loco added to the pack: M41.

Gratulations for the Hungarian Diesel Pack!

[hungarian]Kikko, minden elismerésem. [/hungarian]

I gratulate too for this pack, almost every Hungarian train is made!

I hope someday this pack will be finished. I think these trains missing:
6112 and 6312 (InterPici Bzmot) DMU
6341 (Metrovagonmas) DMU
Not so important for me, but would be nice:
M28 diesel locomotive
M32 diesel locomotive
and maybe the historic stock

Some more train requests:
more passanger carriages (InterCity and InterCity Rapid especially)
BDVmot EMU
BVhmot EMU
BVmot EMU
5042 EMU (if the MAV livery is available yet)
5142 EMU (if the MAV livery is available yet)
Not so important for me, but would be nice:
V41 electric locomotive
V42 electric locomotive
and maybe historic stock
and perhaps some steamers

I know that Hungarian Locomotion players likely know what's missing, but I think it's a good summary and of course it's my preference list. I'll be very pleased if at least the important ones will be available.

[Hungarian] Kikko, remélem, lesz kedved folytatni, nagyon jó csomag és szerintem a nagy része megtalálható MSTS modellként. [/Hungarian]

PS.: Every other Hungarian vehicle is welcomed, trams, busses, HEV, FAV etc.

Hi!
I'm using your Diesel Pack too. But can you make a passenger/mail combinated Bzx? I think i saw that combo.
And an Ikarus-GANZ-MAVAG Bzmot 601 which runs in Malaysia.

Technical data
Gauge 1000 mm / 1435 mm
Axle layout 1-B-1
Type of engine (diesel) Cummins NTA855R
Engine power 250 kW
Transmission hidromechanical
Type of driving gear Twin Disc TAC22-130
Max. speed 100 km/h (63 mph)
Lenght between bumpers 25400 mm
Passanger seats 86
Weight 32 t
Max. Axle load 12,5 t
Designed 1983

Ahh, that Ikarus railcar looks fun

[Hungarian]Ehh, ez az Ikarus sínbusz nagyon durva [/Hungarian]

question, how much does the hopper hold and how fast does it go?

Nightquest wrote:I gratulate too for this pack, almost every Hungarian train is made!

I didn't found these trains as an MSTS model:

6112 and 6312 (InterPici Bzmot) DMU
6341 (Metrovagonmas) DMU
BVmot EMU

I have problems with converting:

BDVmot EMU
BVhmot EMU
steamers

The problems are:
electric locomotives: can't raise pantograph in MSTS2lomo
steam locomotives: can't animate in MSTS2lomo

I'm very busy in these days, so I don't know when new releases will be available.

Samo wrote:question, how much does the hopper hold and how fast does it go?

MAV Eas
available: from 1960
capacity: 60t of coal, iron ore, wood
max speed: 120 km/h

But I found it oversized. This version isn't efficient compared to other lomo hoppers.

Here is the fixed version (I made it few months ago)

Kikko wrote:Hungarian Diesel Pack 1.0 released.

Contents:

DMUs: Bzmot with Bzx coach, Desiro.
Shunters: MAV M42, M43, M44, M47.
Universal locomotives: M40, M41, M63.

M63 retired about 15 years ago, the others are still in service.

That Desiro looks A LOT like the O-Train in Ottawa.


Yes the O-Train is a Talent but it looks very close like the one you made. Any chance you can make this? If you are interested I'll post more pictures.

Kikko wrote:
I didn't found these trains as an MSTS model:

6112 and 6312 (InterPici Bzmot) DMU
6341 (Metrovagonmas) DMU
BVmot EMU

I have problems with converting:

BDVmot EMU
BVhmot EMU
steamers

The problems are:
electric locomotives: can't raise pantograph in MSTS2lomo
steam locomotives: can't animate in MSTS2lomo

I'm very busy in these days, so I don't know when new releases will be available.

I'll be very patient, I promise and thanks for the hope

Some missing MSTS modells:
InterPici BZmot:
http://filing.atw.hu/
6341 (Metrovagonmas) DMU
http://mstsaoc.extra.hu/download.php?view.149

I understand the problems and I hope someday you too will find the solution.

Breeze646 wrote:That Desiro looks A LOT like the O-Train in Ottawa.

Yes the O-Train is a Talent but it looks very close like the one you made. Any chance you can make this? If you are interested I'll post more pictures.

Talent is made by Bombardier Inc., a Canadian company, Desiro made by Siemens, a European company. They are multinational manufacturer of rail transportation equipment, and probably they cooperate in order to make for eg. this DMU.

Talent is available as an MSTS modell, so I can convert it to lomo.
Could you send me further information about Canadian Talent? For eg. name of the train operator, available date, number of seats for each car, consist, power.

excuse me, but isn't Desiro an EMU? IIRC it has some pantos....

chipetke wrote:excuse me, but isn't Desiro an EMU? IIRC it has some pantos....

Not always as far as i remember. I think that the UK has some Desiro's that are DMU's like the UK Class 185 which is a 3-car DMU made by siemens in the Desiro family.



MD

I see...
AFAIK Desiro DMU was never in use in Hungary... EMUs started about half a year ago...
I understand, that this is a Diesel set, but it is also a Hungarian...
If I'm wrong, please correct me...

Edit: Nice gfx anyway... when I install Lomo again, I will surely use this set...

the hungarian siemens desiros are diesel trains, they haven't got any pantos.

Kikko wrote:
I didn't found these trains as an MSTS model:

6112 and 6312 (InterPici Bzmot) DMU
6341 (Metrovagonmas) DMU
BVmot EMU

I have problems with converting:

BDVmot EMU
BVhmot EMU
steamers

The problems are:
electric locomotives: can't raise pantograph in MSTS2lomo
steam locomotives: can't animate in MSTS2lomo

I'm very busy in these days, so I don't know when new releases will be available.

BVmot for MSTS at http://gnm-club.extra.hu/
Gratulations for the Hungarian Diesel Pack.

sorry to say but this msts model is not suitable for LoMo. The carriages and the driving cab is too long.

[quote=Kikko]The problems are:
electric locomotives: can't raise pantograph in MSTS2lomo [/quote]
not in MSTS2Loco, but if you make the 3D model ,and render it, it's possible to make the pantograph moving.

i love the locs themselves, beautiful, but these models could do with some HQ. would make them even more brilliant, i guess.

Kikko wrote:
The problems are:
electric locomotives: can't raise pantograph in MSTS2lomo
steam locomotives: can't animate in MSTS2lomo
.

actually .. there are ways around both. i fianlly figgured out a way.