Transport Tycoon Forums

OzTransLtd wrote:

Purno wrote: ... Y2 DMU ...

I have never seen this one; well if you could supply the details, it can be included.

I know nothing about this train. Perhaps someone from Sweden can supply details?

Purno wrote:

OzTransLtd wrote:

Purno wrote: ... Y2 DMU ...

I have never seen this one; well if you could supply the details, it can be included.

I know nothing about this train. Perhaps someone from Sweden can supply details?

The Y2 DMU is actually a Swedish version of the Danish ICE3 DMU, "FlexLiner". It ran on "Kustpilen" which is swedish for "Coastal Arrow". In total 20 of these trains were ordered from ABB (Bombardier), but as the original railway they used to run on became electrified, most of them were sold. 10 trains were sold to Israel during 2004-2005, 4 trains were sold to DSB in Denmark while a few others ended up in local services in Sweden.

Type: DMU, 1st and 2nd class
Axelföljd: (1A)'+(A1)'+(1A)'+(A1)
Length: 55800 mm
Weight: 98/105 ton (beroende på motortyp)
Effekt: 1170/1240 kW (beroende på motortyp)
Speed: 180 km/h
Manuf; Scandia/ABB
Built: 1991-1998

Here's an image of it;

OzTransLtd wrote:
. the vehicle is 4/8, you made it exactly 16 pixels long (horz view) but in the mockup you showed it with a 1 pixel gap between vehicles. If you want a 1 pixel gap then you need to make it 15 pixels long. BTW, with a gap you need to make vehicles (horz view) a multiple of 4 pixels minus 1.

The mockup is as you said, a mockup. The gaps between vehicles are for you to choose, i only draw the stuff.

The longer trailer & motor unit are 32 pixels..the short trailer im not shure if the diagonals are right lenght, their about 9 or 10 pixels atm while they usually would be about 8 pixels..

Akalamanaia wrote:The mockup is as you said, a mockup. The gaps between vehicles are for you to choose, i only draw the stuff.

Except for the fact that OzTransLtd can only adjust the gaps by multiples of 4 pixels.

If you draw a 23 px rail vehicle, you get a 1 px gap.
If you draw a 24 px rail vehicle, you get a 0 px gap.
If you draw a 25 px rail vehicle, you get either a 1 px overlap or a 3 px gap.

fire87 wrote:AndersI: Te Rc6. Would you give me permission to use your old orange livery in the Norwegian Trainset?

Of course! If you think they are up to par with the others - remember, it's the first TTD graphic I've ever done, and I did move some pixels around.

Akalamanaia wrote:While i was bored, i photoshopped together a few screens to see how could they look ingame..

I just love this little train. Must. Have. It. (or however one expresses deep desire).

If there's anything to complain about, it's the dark orange door on the baggage cars, but as you explained the scarcity of different nuances, I suppose there isn't much to do about it.

Maybe the _ view is a bit long compare to the \ / views for the long cars, the little baggage car seems to have a different proportion between views.

A Dm3 grinds through the countryside on the head of a long ore train

Ohhh....s**t...

Now, that's %¤&?!# beautiful!

*clap* *clap* *clap*

DanMacK wrote:A Dm3 grinds through the countryside on the head of a long ore train

Most impressive ... and ore wagons as well.

Sorry for the doublepost.. Someone delete this?

OzTransLtd wrote:fire do you want to lead that project ?

Seeing that I don't know the Swedish trains all too well, I would prefer that some of the Swedish people could lead it instead. BUT, if noone's interested, I don't mind taking this project too. If I now lather get asked about leading the Danish Trainset too (BTW, is it cancelled?) I could say that I'm leading a Scandinavian Trainset

AndersI: Well, TBH I think you're graphics is way better than what I've been capable of making. And I'm sure it would fit in the Norwegian Trainset, along with the ordinary Rc6

EDIT: This question goes to DanMacK: Could we get the permission to use the Dm3 in the Norwegian Trainset? Off course, the colours must be changed and things like that, but I think it's better to have this one as a base and try, than to make one and screw it up. Atleast I would be a master to do that
Hmm.. Two permission questions in under a week..

fire87 wrote:Seeing that I don't know the Swedish trains all too well, I would prefer that some of the Swedish people could lead it instead. BUT, if noone's interested, I don't mind taking this project too.

IMO, it's more important to *lead* than to 'know it all'. Facts about Swedish trains can be researched by anyone, but a project needs a stable hand driving it on.

fire87 wrote:AndersI: Well, TBH I think you're graphics is way better than what I've been capable of making.

Don't forget - I only recolored. No big deal. But I'm trying to draw the T43 (diesel freight engine) from scratch now, and *that* is a challenge!

EDIT: Updated again (2006-Mar-31)...

AndersI wrote:

fire87 wrote:Seeing that I don't know the Swedish trains all too well, I would prefer that some of the Swedish people could lead it instead. BUT, if noone's interested, I don't mind taking this project too.

IMO, it's more important to *lead* than to 'know it all'. Facts about Swedish trains can be researched by anyone, but a project needs a stable hand driving it on.

And I would be that stable hand then? I don't really know.. I just have a feeling I wouldn't work too much on this set, seeing that I really don't have any interest at all in internet and that sort of things anymore

AndersI, you might find the Dr16 or Dv12 that DanMacK done for the finnish set useful refrence on how to draw the rest of the views..

heres the Dr16 refrence sprite http://www.tt-forums.net/files/finnishstuff_177.png
heres the Dv12 refrence sprite http://www.tt-forums.net/files/dv12_366.png

Please be noted if you want to recolour them you most probably will have to ask DanMacK.

Well, the Dm3 will be done in both original red and IORE liveries

There ain't any IORE livery for the Dm3, it's LKAB.
And it's actually the Dm3 LKAB that visits Norway with iron ore from Kiruna

OK, maybe this thred drowned in everything else...

Could anyone give me some constructive criticism on my first try at drawing a TTD engine from scratch. It's a Swedish T43 diesel loco (freight).

Edit - picture of the real thing. Scroll down the page a bit.

Well, I think it looks good, but then im not an artist

AndersI wrote:OK, maybe this thred drowned in everything else...

Could anyone give me some constructive criticism on my first try at drawing a TTD engine from scratch. It's a Swedish T43 diesel loco (freight).

Looks pretty nice, perhaps with a picture of the real thing I could discover some errors

Purno wrote:Looks pretty nice, perhaps with a picture of the real thing I could discover some errors

http://www.jarnvag.net/lokguide/T43.asp