Transport Tycoon Forums

I know it's an old thread without any activity recently, but on the off chance someone sees this, is there any way to make a variant of the CHIPS station tiles without the stations' industries goods on? I would do it myself, but I don't know how.
Regards

pr0saic wrote: ↑31 Jan 2021 21:34 I know it's an old thread without any activity recently, but on the off chance someone sees this, is there any way to make a variant of the CHIPS station tiles without the stations' industries goods on? I would do it myself, but I don't know how.
Regards

Don't bother. It takes far too much work to learn how to do something as simple as what you asked for and everyone else will refuse to take requests. I'd do it, but I don't know how either.

Gadg8eer wrote: ↑01 Feb 2021 04:44 Don't bother. It takes far too much work to learn how to do something as simple as what you asked for and everyone else will refuse to take requests. I'd do it, but I don't know how either.

Dude, go easy, don't just escalate straight to s*** on his and everyone else on this forums cereal.

pr0saic wrote: ↑31 Jan 2021 21:34 I know it's an old thread without any activity recently, but on the off chance someone sees this, is there any way to make a variant of the CHIPS station tiles without the stations' industries goods on? I would do it myself, but I don't know how.
Regards

As far as the NFO is concerned it shouldn't actually be too hard; you'd basically be looking at stripping most of the action two chains that are likely responsible for the loading sprites. You would have to start learning NFO though and that's not an easy task by any stretch of the imagination though, https://newgrf-specs.tt-wiki.net/wiki/Main_Page is your starting point. Basic skinny on Stations is you use an Action 0 to define the stats of a station, action 2's and varaction 2's to screw with the actual sprites, and then Action3's to chain them all together and an action 4 to define the name. In your instance you should see a bunch of action3's and action 2's attached to each station ID's for each and you basically want to cut it back to the bare sprites.

If however you're looking for something in a similar theme but without loading stages than my Basic Stations set might fit the bill; basic dirt and gravel stations without loading stages... Funnily it's actually on my to-do list to add cargo waiting sprites though .

CHIPS 1.10.1 released, on Bananas.

-------------
1.10.1 Release
-------------
Cargo graphics for:
- carbon steel
- steel sheet
- tyres
Convert to git, update makefile accordingly

Aegir wrote: [...] You would have to start learning NFO though and that's not an easy task by any stretch of the imagination though, https://newgrf-specs.tt-wiki.net/wiki/Main_Page is your starting point. Basic skinny on Stations is you use an Action 0 to define the stats of a station, action 2's and varaction 2's to screw with the actual sprites, and then Action3's to chain them all together and an action 4 to define the name. In your instance you should see a bunch of action3's and action 2's attached to each station ID's for each and you basically want to cut it back to the bare sprites.

Hehe Richard, easier said than done!

I did take a look, and of course you missed to mention station layouts (although, formally, a subcategory of "action 0"). And then, there's much use of GRM (together with that infamous action 6). Which takes me wonder, since a quite large and complex station set like NewStations does not use GRM at all.

How's reissue of your set coming along?

regards
Michael

michael blunck wrote: ↑08 Feb 2021 09:26

Aegir wrote: [...] You would have to start learning NFO though and that's not an easy task by any stretch of the imagination though, https://newgrf-specs.tt-wiki.net/wiki/Main_Page is your starting point. Basic skinny on Stations is you use an Action 0 to define the stats of a station, action 2's and varaction 2's to screw with the actual sprites, and then Action3's to chain them all together and an action 4 to define the name. In your instance you should see a bunch of action3's and action 2's attached to each station ID's for each and you basically want to cut it back to the bare sprites.

Hehe Richard, easier said than done!

I did take a look, and of course you missed to mention station layouts (although, formally, a subcategory of "action 0"). And then, there's much use of GRM (together with that infamous action 6). Which takes me wonder, since a quite large and complex station set like NewStations does not use GRM at all.

How's reissue of your set coming along?

regards
Michael

Yes I realized afterwards how complex it was when I helped Andy out with a grfid/classid issue for something he's working on. I'm not super familiar with GRM but having worked with making my own makefile/gcc abusing build system it didn't take me too long to work out. I'm finding sometimes after seeing some of these complicated build environments in a few projects I'm having an easier time understanding the raw NFO out of grfcodec than I am the original source.

As for Suburban Stations 2.0... I frankly, haven't done anything. I completed a ready to code spritesheet lately and updated my github repos and have been procrastinating stuffing around with other sideprojects instead.

CHIPS 2.0.0 released (get it in game using bananas).

2.0.0 Release

Revised ground tiles:

• added a variant for Asphalt tiles with dirt / weathering
• repainted Asphalt, Mud and Cobble tiles
• track tiles better fit standard gauge tracks that use the size/spacing of default RAIL railtype sprites
• revised ground tiles match to FIRS 4 industry ground tiles
• simplified ground tile names, removing 'FIRS' etc
• Reworked docks:
  • uses revised Asphalt surface texture
  • added a small building and some generic cargo sprites
• Added Harbour Crane Rails tiles, and added rail sprites to existing Harbour Crane tiles
• Improved mine building tiles (Tipple, Flood Loader, Small Mine Building, Large Mine Building):
  • all sprites redrawn to look better
  • now mostly grey not company colour, as the company colour often clashed with FIRS mine colours
  • mine building tiles now (in most cases) appear to be connected structures when placed next to each other
• Reorganised tiles in construction menu to provide better order and grouping
• Added cargo graphics for:
  • Alloy Steel
  • Stainless Steel
• Bumped grfid as this is CHIPS version 2
  • not savegame compatible with stations using CHIPS 1 tiles
  • however CHIPS 2 can be used alongside CHIPS 1 in the same game if desired

More from 2.0.0...

CHIPS 2 ground won't match existing object sets that re-use CHIPS sprites (e.g. FIRS and CHIPS Objects, similar object sets).
They don't look too bad together though.

andythenorth wrote: ↑06 Mar 2021 10:38 FIRS 2.0.0 released (get it in ...

If there should be CHIPS, my English is getting better, but thanks to the forum

madrito wrote: ↑06 Mar 2021 11:57 If there should be CHIPS, my English is getting better, but thanks to the forum

Ha ha, good spot. Fixed it, thanks

Looks great! No more setting my main CC to brown or grey for my stations!