Transport Tycoon Forums

Very nice TrainSet, but i'm missing some Trains.

1. BR 103
The BR 103 was the first "Highspeed Train" in Germany in 1970. The "Highspeed" was 124 mp/h (200 km/h)
2. Acela Express
A Highspeed Train in the USA on the electrified NorthEast Corridor.
3. Shinkansen
The japanese Highspeed Train.

Maybe take these trains still in the 2CC Set.

Can bridges be included within a tracks set? That way, 2 bridges inside the metrorails.grf could do the trick.

I think you could probably do that, but you'd need to give the metro tracks grf a higher priorty than any bridge set. Otherwise the bridge set would just override it.

You can't. Bridge sprites include the track.

the upcomeing 2030 (5th gen) doubledecker. Here pulled by a HLE13, along with a 1stclass and express wagon

Thank you for enlightening me, Purno, Foobar and athanasios.

Purno wrote:You can't. Bridge sprites include the track.

You mean you can't incorporate both bridges-with-track and regular tracks in one grf?

I'd say the metrotracks need only a very limited amount of bridges - two might be enough. In real life, metros don't have enormous bridges, I think, so they might even be limited to a rather short length. That would make it impossible to cross big forths with them, but that would add a nice touch. How about:
- a stone bridge, lengths 2-7
- a truss bridge, lengths 3-7?

IIRC FooBar would draw some metro bridges, or it was someone else.

Yes, I will draw some bridges in the future. I'm currently reasonably busy with other stuff. And the fact that my operating system crashed last week isn't helping either. Apart from that, I'm also awaiting the newBridges support which is still in development right now. Don't worry. There will be bridges. I just can't tell when.

im sorry, my server seem to have been offline for a couple of days, i had a power blackout at home at home during my workhours, and when it booted back on it seems like by bios battery is flat, because it had it's clock reset, and if that happens, windows wont take the NIC's drivers (probably a security precaution?), and when i needed to access it yesterday it seemed offline. I rebooted, set' the clock and now everything works fine.

Altho, i guess i'm gonna reinstall windows on it sometime during the weekend or next week. I ordered a raid card and two 1tb disks im gonna use as mirrors. I've lost all my files one time to many. (Not recently, but when used to a 200gb disk the last 5 years, 1tb should be enough for the next 5 or so).

As well as that computer used to be my desktop computer it probably have a lot of "crap" installed, so now when it's a dedicated server, it's better to have a clean install as possible. Just windows, updates, http/ftp server, and some kind of remote administrator software .)

It's not been done much on the set the last days, or even weeks tho, i've been quite busy at work. There are more trains to "inject", but i also have some other ideas as well for the existing ones. I've hit a slight problem with that idea, but i _will_ get it to work. A hint. If v=0 -> $ = 10

If speed is none, cost is low?

exactly, and just 5 minutes ago i released it.

If the trains are standing still the running costs are in the area of 1000-1500£. This is just on MU's and engines right now, not sure what to do about the railbusses. And the metros wont have this i think, as they dont cost THAT much to run, atleast since the wagons are free. And on MU's does it ofcourse apply to each unit

This is to simulate that when the engine dont use power, it dont cost an arm and a leg to run as well...

Feel free to upgrade everyone!

The 2cc-set is getting better and better. But I still found some bugs:

Bug 1:

The white line on the roof.
Bug 2:

The BB27000 is introduced too early. It should be 2002 instead of 1990.
The topspeed of the BB27000 is too high. It should be 140 km/h instead of 201.

Check your stats here:
http://en.wikipedia.org/wiki/SNCF_Class_BB_27000

Bug 3:

The 3rd coach from the left needs to be mirrored I think.
Bug 4:

The middle coaches have white lines at the bottom in both directions.

Possible Bug:

The rear lights should be 2 red lights instead of 3 white lights.
Question:

Will the Crocodile ever be included in the 2cc set?

trainboy2004 wrote:Possible Bug:

The rear lights should be 2 red lights instead of 3 white lights.

Hardenwater Transport, 24th Jan 2001.png

Rear lights should be red. Please also check the front lights, as those might be red now

Question:

Will the Crocodile ever be included in the 2cc set?

Whenever I (seems unlikely ATM) or someone else draws it, it could certainly be included.

trainboy2004 wrote:Will the Crocodile ever be included in the 2cc set?

It's part of Spanish set, I think Sanchimaru drew it, so you should ask him to repaint it in 2cc.
(BTW, I like that locomotive too. )

Similar type body, but different loco I've drawn it for the Swit Set, and would be happy to 2CC it at some point

Please do Dan.

Purno wrote: Rear lights should be red. Please also check the front lights, as those might be red now

No, both sides where white.

DanMacK wrote:Similar type body, but different loco I've drawn it for the Swit Set, and would be happy to 2CC it at some point

Nice, is it animated?

Trainboi2004 wrote: bugs

i'll look into theese, the ice3 one is fixed locally, and the 27000 is a 26000, thus do the stats match the RL one (also fixed locally)