AuzObjects

[belgi]

AuzTownObjectsAddOns
Subject: Seawalls and foundations.

Been working on a suggestion of Quast65 to allow the seawalls in AuzWaterObject sets to also be used away from the coast.

I started on these over the last few days and got a wee bit side tracked. On Monday when I visited the City Hall and Civic Park gave me some ideas on gardens on slopes. I did do some before, but I felt I could make some nicer ones.
These gardens have 5 rows with seats.
They can be places on the slope
Gardens.png
or away from slope.
Gardens2.png
Still need to do them facing South-East and make a few new paths so they align with the steps on the left and the rights.

Hope on Thursday and Friday do some more and just might have something ready for the weekend.

Cheers

I think that's great! And I would use it, for example, in the castle garden that the nobility built near their castle

2023-03-14_001_Zámecká zahrada.jpg

Zámecká zahrada

(467.36 KiB) Not downloaded yet

2023-03-14_002_Zámecká zahrada.jpg

vypnuté lesy

(301.3 KiB) Not downloaded yet

2023-03-14_003_Zámek a zahrada.jpg

Zámek se zahradou

(650.94 KiB) Not downloaded yet

Have a nice day

[fridaemon]

2023-03-14_002_Zámecká zahrada.jpg

Have a nice day

Hi From which set are those pavement roads?

I also thought of making houses that have garages on the ground floor. Would it be possible?

Have a nice day!

And back to your post under my thread ... I can do some of them

[3iff]

I'm having trouble, no idea why.
I'm using JGR 51.1 but when I just the various object grfs, I get mostly blanks (see the pics).
I've also tried with JUST these grf to ensure there's no conflicts from other grfs.

Any suggextions?

[Quast65]

Any suggextions?

Could you also post a screenshot of your GRFlist?
Could possibly be that you are using an obsolete GRF that is conflicting with the others.

I have almost all AUZ objects in my JGR51.1 and all is fine.

Doublecheck Kamnets list of Auz GRFs (especially list of outdated at the bottom)
viewtopic.php?t=89180

Furthermore, I believe that most stuff on BaNaNas is pretty much outdated too...
Most up-to-date things are here in the Forum.

[belgi]

2023-03-14_002_Zámecká zahrada.jpg

Have a nice day

Hi From which set are those pavement roads?

Hello
The paths in the park / garden are from the Auz Town Objects set

Auz Town Objects

2023-03-14_004_Zámek a zahrada.jpg (47.95 KiB) Viewed 4512 times

I also thought of making houses that have garages on the ground floor. Would it be possible?

Have a nice day!


And back to your post under my thread ... I can do some of them

Thank you very much! That will be awesome!

Have a nice day

[3iff]

I just have auzobjects and auzstationsnormal (latest versions downloaded from this forum category) and NO OTHER grfs (to avoid the conflicts that you suggest could be happening)

I can't access bananas anyway (a long story...the library computer I'm using won't allow me to run ottd)

I'm not a novice but I can't understand what is going wrong. I did read somewhere about a grf where objects don't properly show up it they are date activated but normally they appear but are greyed out. I have that on some station grfs from ages ago.

I'll check the list and make sure I have updated files.

[Quast65]

I just have auzobjects

Reason I ask for a screenshot of your GRFlist, is because of the first screenshot you posted.
It looks like some kind of testGRF is possibly messing some things up.
Those graphics have to come from somewhere...
They look like they come from the templates that Garry (and me too) use to test if large structures are placed correctly.

The best way to test, is making a screenshot of your current GRFlist.
Then empty it in your game and then add the GRFs one by one, using previously made GRFlist shot, each time in a new game offcourse and then see when things go wrong.
I know I know, that can take some time, but it's good to know if there is something conflicting out there...

[GarryG]

I'm having trouble, no idea why.
I'm using JGR 51.1 but when I just the various object grfs, I get mostly blanks (see the pics).

I don't use JGR sets mainly because when I first started coding I use to use it and found some of my projects would only work with JGR. So to make sure all my projects worked with all sets I only test with OpenTTD.

I have it and all my other station sets loaded along with all my object sets and having no problem.

On page 1 in this forum is a list of my object sets and what page to find the latest entry.

Hope you sort it out.

Cheers

[Argus]

I use JGR and have no problem. I guess it's some kind of collision with other graphics. Just to be sure - weren't they changed during the game?

[GarryG]

AuzTownObjectsAddOns
Subject: Making set of Seawalls so can be used on land.

Still working on seawalls, ramps with steps and sloped gardens.

I did the Slope Aware seawalls so can go on land.
There 4 types .. the ones shown here, brick, stone and moss stone.
Also done gardens that can go on slope of flat land.

Foundations 1.png (42.17 KiB) Viewed 4282 times

The seawalls that have the steps a problem at the moment. The steps overlap in southerly direction and paths and other objects hide the steps like in the image.

Foundations 2.png (20.38 KiB) Viewed 4282 times

Maybe the answer is to sink the steps into the foundation like this.

Foundations 3.png (5.09 KiB) Viewed 4282 times

It taking me a lot longer then I thought with the project.

Cheers

[GarryG]

AuzTownObjectsAddOns
Subject: Making set of Seawalls so can be used on land.

I decide to sink the stairs into the foundations and have 3 stairs to choose from for each of the 4 wall types (brownish brick, red brick, grey stone and grey stone with moss).

Foundations 4.png (42.22 KiB) Viewed 4098 times

Still a lot of work to do and no idea how long it will take me.

Cheers

[Quast65]

Lovely looking stuff!

[belgi]

AuzTownObjectsAddOns
Subject: Making set of Seawalls so can be used on land.

I decide to sink the stairs into the foundations and have 3 stairs to choose from for each of the 4 wall types (brownish brick, red brick, grey stone and grey stone with moss).
Foundations 4.png

Still a lot of work to do and no idea how long it will take me.

Cheers

It looks very good!
I wish you strong nerves and I look forward to being able to use it in the game

Have a nice day

[GarryG]

AuzTownObjectsAddOns
Subject: Making set of Seawalls so can be used on land.

Can let you have a test what I been doing past few days.

The gardens shown previous posts can be found under the Object menu "Gardens"
I've only did southerly directions with the slope gardens.

The foundations, steps and ramps can be found under "Parks + Paths".
The steps and ramps in this image I have only down the south-west direction for now .. will do other direction eventually once I happy with the actualy designs of these.

Foundations 6.png (44.33 KiB) Viewed 3947 times

These steps that are sunken into the foundations face both southerly directions.

Foundations 5.png (28.28 KiB) Viewed 3947 times

I did slope aware foundations. Some with all concrete slabs at the top and some with lawns (mowed grass).

Plans:
* I plan to make some more path ways to align with the wide steps and the steps with the gardens.
* Make some multi select foundations facing south-east and south-west to match the slope aware, but to include people and looking at pinching some of "fridaemon" objects.
* Make a set of ramps and stairs to go on side of slopes.

Here the game file if like to test what I did so far.
Woops .. I uploaded the NML instead of the GRF .. lets try again.

Cheers.

[Quast65]

Looking good!

A couple of remarks:

1. Doublecheck your menu-graphics, some are not correct:

Example770.png (21.9 KiB) Viewed 3896 times

Only this one, the others are correct

Example771.png (37.81 KiB) Viewed 3896 times

All four


2. For the stairs that are not an entire tile wide (so also those that will have a ramp next to them).
I think it is ok to add the missing part of the fence at the top of the stairs in the graphic of the ramp.
So that they connect to stairs on the seawalls:

Example772.png (55.77 KiB) Viewed 3896 times

3. The lights...
That may be a bit of a more personal taste thing, but some lights look good, some dont...
I think it has to do with the size (especially hight) of the lights.
The "original" ones, so the lightgrey short ones (as in the picture above), those look good with two on a tile.
The "new" ones, not so much...
The modern looking ones are high, which is ok on their own, but two so close too each other is too much...
Same with the bended ones, too close to each other.
It just feels a bit too much, dont really know how to describe it
I think it is better looking to only use the "original" shorter lightgrey lights for all the different foundations...

[GarryG]

A couple of remarks:

Appreciate your feedback.
Will fix those menu-graphics .. that a problem when we flip things it throws things out of order and I forget to check

For the stairs that are not an entire tile wide (so also those that will have a ramp next to them).

I left the fences out deliberately for now as wondering if any one would use these stairs differently. Will add the fences and if any one reports using them differently will do some with out the fences as well.

That may be a bit of a more personal taste thing, but some lights look good, some dont...
I think it has to do with the size (especially hight) of the lights.

Maybe those with the red brick could be a bit shorter .. but 4 pixels.

The modern looking ones are high, which is ok on their own, but two so close too each other is too much...
Same with the bended ones, too close to each other.

I think your right should only be one light pole.

The foundations with the lawn (originally part of the golf course you helped me with ) Wonder if look better if the lights was moved to other side of the path . away from the fence. Seen a few images on inter with the lights like that.

I think it is better looking to only use the "original" shorter lightgrey lights for all the different foundations...

I not sure if all the lights to look the same .. I think the brownish walls and brick could be modern looking and the grey stone ones be a bit older looking.
See what I can do tomorrow morning .. but lunch time I going train watching and again Tuesday morning weather permitting. Wednesday had medical appointments.

Cheers

[gravelpit]

Nelson & Co., 2008-11-19.png (139.66 KiB) Viewed 3797 times

Can you fix this? pleas

[gravelpit]

Nelson & Co., 2008-11-20.png

(205.67 KiB) Not downloaded yet

[GarryG]

Did go train watching as weather turned bad, so stayed home and been fixing and changing a few things in
AuzTownObjectAddOns.

Changed the lighting to some of the foundation as suggested by Quast65. The red brick and the grey stones instead of 2 lights changed it to 1 lights.

The foundations with the path and lawns .. moved the lights to other side of the path.

Foundations 7.png (30.44 KiB) Viewed 3767 times

After doing those then wondered if those with the wide path if the lights could be moved to the middle of the path.
Something like these.

Foundations 8.png (5.79 KiB) Viewed 3767 times

I fixed these and then realized I don't really need them as already have them in the slope aware sets so if no objections I will delete these.

Found a error in the slope aware in the ones with path and lawns .. have the path wrong side with some east and west slope pieces. So hope fix those during the week.

Cheers

[GarryG]

Can you fix this? pleas

Thanks for finding a few errors.
Those slope aware foundation walls was not meant to go on water. AuzWaterObjects has its own set with a different path way.

But you gave me a idea where I can use the triangle pieces of walls to place on the water. They multi select at moment, but will change them cause every time you select a piece it costs you even with the building cost set to 0.

Hope have them ready before the weekend.

Cheers