Industrial Stations Renewal 1.0.2 - Bridgeable
Posted: 15 Aug 2018 18:14
Industrial Stations Renewal 1.0.2 - Bridgeable
======================================
In consideration of JGR's extension of his Patch Pack to support bridges over stations, we have added this feature to Industrial Stations Renewal.
It is so very simple to use. We have set a minimum bridge height for each tile in the menu.
All you need to do is drag and drop your favourite bridge.
If you should get the dreaded " ... must demolish station first" error message, try again on the next higher level or build a lower platform.
Note that with the "Stations" class in the GUI menu, structures are randomly selected and positioned without guaranty that the highest available structure will be present or conveniently positioned. Consequently, the minimum bridge height has been set to clear the height of the highest structure across the width and length of that station. A more reasonable height can be realized along the proposed path of the bridge by selecting a lower platform tile (e.g. road tile) from one of the other platform classes and using it to overbuild the station platforms along your proposed bridge path.
There is a parallel discussion at Simuscape.
Bridgeability requires JGR Patch Pack v0.26.0 or newer.
Contains:
1. indstatrBridgeMod.grf
2. indstatrBridgeMod.nfo - The source code
3. changelog.txt - History
4. license.txt - GPL v.2
5. readme.txt - An educational read
GrfID: 4A430003
License: GPL v2
Installation
------------
Do not extract the files from Industrial_Stations_Renewal-1.0.2-Modified.tar
Simply place the .tar file into the folder where you keep your OTTD newgrf files.
OTTD or JGR Patch Pack will do the rest of the work of making the .grf files visible in NewGRF Settings.
"Add" the files to the Active NewGRF Files panel.
Remember to click on Apply changes.
======================================
In consideration of JGR's extension of his Patch Pack to support bridges over stations, we have added this feature to Industrial Stations Renewal.
It is so very simple to use. We have set a minimum bridge height for each tile in the menu.
All you need to do is drag and drop your favourite bridge.
If you should get the dreaded " ... must demolish station first" error message, try again on the next higher level or build a lower platform.
Note that with the "Stations" class in the GUI menu, structures are randomly selected and positioned without guaranty that the highest available structure will be present or conveniently positioned. Consequently, the minimum bridge height has been set to clear the height of the highest structure across the width and length of that station. A more reasonable height can be realized along the proposed path of the bridge by selecting a lower platform tile (e.g. road tile) from one of the other platform classes and using it to overbuild the station platforms along your proposed bridge path.
There is a parallel discussion at Simuscape.
Bridgeability requires JGR Patch Pack v0.26.0 or newer.
Contains:
1. indstatrBridgeMod.grf
2. indstatrBridgeMod.nfo - The source code
3. changelog.txt - History
4. license.txt - GPL v.2
5. readme.txt - An educational read
GrfID: 4A430003
License: GPL v2
Installation
------------
Do not extract the files from Industrial_Stations_Renewal-1.0.2-Modified.tar
Simply place the .tar file into the folder where you keep your OTTD newgrf files.
OTTD or JGR Patch Pack will do the rest of the work of making the .grf files visible in NewGRF Settings.
"Add" the files to the Active NewGRF Files panel.
Remember to click on Apply changes.