AuzObjects

[Quast65]

nice, thank you!

[GarryG]

Grass is to wet from rain we had yesterday and last night to mow, s that given me an excuse to try drawing some tanks.

AuzMilitaryObjects
Subject: Tanks

Much thanks goes to those who have made bulldozers as I use those to design what I done. Was just a matter of keeping the tracks and redesigning the cabin and motor.
There are 3 Object Selections for the Tanks. 2 lots of pavement with 1 or 2 tanks

Tanks on pavement.png (13.72 KiB) Viewed 2027 times

and the 3rd one the tanks are on natural ground. The ones on natural ground can also be placed on slopes.

Tanks on grass.png (23.52 KiB) Viewed 2027 times

I'll make some for the artillery to be placed on slopes and hope have the upload ready in a few hours time.

[GarryG]

I'll make some for the artillery to be placed on slopes and hope have the upload ready in a few hours time.

That idea did not work .. I was hoping to use same piece so can be on flat ground or slope, but the dirt and gravel under the guns do not align properly on the slopes.\
So I hooked up the artillery to the trucks and taking them back to base.

Artillery3.png (10 KiB) Viewed 2010 times

What is now available in AuzMilitaryObjects?
* Tents (can be found in Barracks + Hangers)
* More Flags (9 more country flags as request in some previous posts and some Australian and UK military Flags)

More flags.png (24.88 KiB) Viewed 2010 times

* Tanks (2 colours and can be found in Vehicles + Artillery (replaces Trucks + Artillery)
* Trucks with Artillery (travelling southern directions only).
* Military Bands
* Another set of cadets with white hats (request from my daughter).
* Tiger Moth planes
I hope this be last update for the Military Objects till at least next weekend.

AuzMilitaryObjects.grf

(5.91 MiB) Downloaded 58 times

[Quast65]

Very good job!

[belgi]

ESSO přístřešky.jpg

nákladní auta

(660.38 KiB) Not downloaded yet

I'll make some for the artillery to be placed on slopes and hope have the upload ready in a few hours time.

That idea did not work .. I was hoping to use same piece so can be on flat ground or slope, but the dirt and gravel under the guns do not align properly on the slopes.\
So I hooked up the artillery to the trucks and taking them back to base.
Artillery3.png
What is now available in AuzMilitaryObjects?
* Tents (can be found in Barracks + Hangers)
* More Flags (9 more country flags as request in some previous posts and some Australian and UK military Flags)
More flags.png
* Tanks (2 colours and can be found in Vehicles + Artillery (replaces Trucks + Artillery)
* Trucks with Artillery (travelling southern directions only).
* Military Bands
* Another set of cadets with white hats (request from my daughter).
* Tiger Moth planes
I hope this be last update for the Military Objects till at least next weekend.
AuzMilitaryObjects.grf

Great job.
I am basically satisfied. Just one more question, in our army they use a lot the so called ESSO shelters for parking equipment. Would it be possible to make them?
Thank you
and have a nice day

bez aut

ESSO přístřešky 1.jpg (34.32 KiB) Viewed 1921 times

[Quast65]

in our army they use a lot the so called ESSO shelters for parking equipment. Would it be possible to make them?

Because of the perspective OpenTTD uses, I think a couple of pictures from above would also be helpful.
As what you can only see, will be the roof and the (undersides of the) yellow/black colored poles (and some parked vehicles).

[WolfRamXx]

in our army they use a lot the so called ESSO shelters for parking equipment. Would it be possible to make them?

Because of the perspective OpenTTD uses, I think a couple of pictures from above would also be helpful.
As what you can only see, will be the roof and the (undersides of the) yellow/black colored poles (and some parked vehicles).

These are simple universal roofing. Metal roofing sheets on top, you can see these on every hangar and warehouse, under them is metal structure (visible on photo) and all of it is supported mostly by metal columns, but somtimes they are walled of on sides with columns between. Theres really nothing special about it, but its would be very nice detail in (not just) military bases.

[GarryG]

Very good job!

Thank you .. glad you like them.

Great job.
I am basically satisfied. Just one more question, in our army they use a lot the so called ESSO shelters for parking equipment. Would it be possible to make them?
Thank you

Yep can do .. Do you want the nose of vehicles visible under some of the awnings?

I'll make them full size tile so pathways and roads can join them easy.

Any one want to try drawing different types of tanks? These images are my assembly plant.
In stead of trying to draw a full tank .. found it easy drawing each part separately and join them together later.

Tank Assembly Plant.png (3.9 KiB) Viewed 1834 times

Tank Assembly Plant.psd

(18.19 KiB) Downloaded 39 times

That basically how I do all my drawings .. I search other peoples projects for something similar to what I want and do renovations to it or steal parts from them. .. make each section separately and join them later.

[GarryG]

AuzMilitaryObjects
Subject: MPs, Gates and Shelters

Just one more question, in our army they use a lot the so called ESSO shelters for parking equipment.

Done .. 2 types and 2 directions as shown in image.

MPs Gates Shelters.png (40.56 KiB) Viewed 1791 times

Added:
* MPS with guard dogs for Army, Navy and Air Force.
* Security Gates.

Wanted: Idea for a security fence to place around the grounds. There are some nice ones in AuzFenceObjects, but wonder if any ideas for another type?
Once I get the fence done and any other ideas you or I think of will see about uploading the update.

[Quast65]

very nice!

One of the shadings of the roof of the one with the grey pylons is incorrect though.
(the one in the picture on the back, leftside)

[GarryG]

One of the shadings of the roof of the one with the grey pylons is incorrect though.

Fixed .. thank you.

I thinking where the entrance gates are if I make a nice stone walls to go each side of them with the wordings .. ARMY BASE, NAVY BASE and AIR FORCE BASE. JohnFister has some nice lettering on his shops that I can use

When I make some security fences I will do slope aware type so can make a base up in them there hills.

EDIT:
This what the entrance signs can look like.

Base Signs.png (35.3 KiB) Viewed 1747 times

When I decide what security fence to make it will go down the middle of the tiles to align with the signs.

[belgi]

One of the shadings of the roof of the one with the grey pylons is incorrect though.

Fixed .. thank you.

I thinking where the entrance gates are if I make a nice stone walls to go each side of them with the wordings .. ARMY BASE, NAVY BASE and AIR FORCE BASE. JohnFister has some nice lettering on his shops that I can use

When I make some security fences I will do slope aware type so can make a base up in them there hills.

EDIT:
This what the entrance signs can look like.
Base Signs.png
When I decide what security fence to make it will go down the middle of the tiles to align with the signs.

Great job!
Here are some pictures of fences and gates from our barracks.

Have a nice day

kasarna - brana.jpg

brana 1

(248.24 KiB) Not downloaded yet

kasarna - brana 2.jpg

brana 2

(248.12 KiB) Not downloaded yet

kasarna - plot.jpg

plot

(262.72 KiB) Not downloaded yet

[belgi]

plot 2

kasarna - plot2.jpg (163.8 KiB) Viewed 1696 times

One of the shadings of the roof of the one with the grey pylons is incorrect though.

Great job!

plot a zeď

kasarna - plot a zed.jpg (254.09 KiB) Viewed 1696 times

zeď

kasarna - zed.jpg (253.02 KiB) Viewed 1696 times

Have a nice day

[wyndbain]

Great job!
Here are some pictures of fences and gates from our barracks.

Have a nice daykasarna - brana.jpg


kasarna - brana 2.jpgkasarna - plot.jpg

I feel most of these can be achived with the current objects in the fences set, but some worn down and rusted ones would be cool

[Quast65]

* Security Gates.

Could you maybe also make some sort of overlap version (with barriers open and maybe security building on the side and without the concrete, at least at where road could be visible)?
So that actual vehicles can enter/leave a base?

[RoyalExamination9410]

AuzMilitaryObjects
Subject: MPs, Gates and Shelters

Just one more question, in our army they use a lot the so called ESSO shelters for parking equipment.

Done .. 2 types and 2 directions as shown in image.
MPs Gates Shelters.png
Added:
* MPS with guard dogs for Army, Navy and Air Force.
* Security Gates.

Wanted: Idea for a security fence to place around the grounds. There are some nice ones in AuzFenceObjects, but wonder if any ideas for another type?
Once I get the fence done and any other ideas you or I think of will see about uploading the update.

These shelters look great, do they also overlap road pieces so we can put them over a loading zone/road?

[GarryG]

AuzFenceObjects
Subject: Corrugated Iron Fences

Great job! Here are some pictures of fences and gates from our barracks.

The images that belgi uploaded with the Corrugated Fences got me into making some for the game.
Added 5 sets to the Fence object set.

corrugatedFences01.png (37.96 KiB) Viewed 1512 times

* Corrugated side fences
* Corrugated corner fences

corrugatedFences02.png (48.54 KiB) Viewed 1512 times

* Rusty Corrugated side fences
* Rusty Corrugated corner fences
* 2 types of Gates for the above both rusty and non-rusty fences.

Unfortunately these fences have filled the fence object set and no room for any more.
If I add more fences I need to clear some IDs. To do this I will need to make some multi-select and what fences I can move to Farm Objects and/or Road Objects.

Here the game file .. cheers

EDIT:
Forgot to mention each fence is random multi-select. There are 4 fences that are slightly different and when placing it will randomly place 1 of the 4.

[GarryG]

These shelters look great, do they also overlap road pieces so we can put them over a loading zone/road?

we could do that .. do you want them to include the military vehicles? Or maybe put these in the Industry Object set and put crates and other cargos under the shelter?

Cheers

[RoyalExamination9410]

These shelters look great, do they also overlap road pieces so we can put them over a loading zone/road?

we could do that .. do you want them to include the military vehicles? Or maybe put these in the Industry Object set and put crates and other cargos under the shelter?

Cheers

Sure that would also be great. Military is fine.

[GarryG]

AuzMilitaryObjects
Subject: Overlap Security Gates

Could you maybe also make some sort of overlap version (with barriers open and maybe security building on the side and without the concrete, at least at where road could be visible)?
So that actual vehicles can enter/leave a base?

How do these look .. I place the base signs each side for the main tile. Guards hut and gates are the overlap sections.

Overlap Security Gates.png (38.39 KiB) Viewed 1890 times

These the security Fences I started to work on

Security Fences.png (3.3 KiB) Viewed 1890 times

.. want to make them slope aware so you can have your bases in the hills if like.
Just got to look at ideas to use them with the Base signs and Entrances.

Let you all try what I been doing and those new additions of shelters and MPs. Just be careful in case the dogs bite .