Moderator: OpenTTD Developers
It is practically impossible to teach good programming to students that have had a prior exposure to BASIC: as potential programmers they are mentally mutilated beyond hope of regeneration. --Edsger Dijkstra
您试试把一份 1.3.1 和一份 1.3.2 放在不同的文件夹。mfans wrote:What can I do? I will use 1.3.1 to check.
然后关掉，立刻到 1.3.1 的文件夹，执行 OpenTTD.exe，再试一次。
如果 1.3.1 没有出现那个情况，那就是 1.3.2 有臭蟲。
[English translation for other folks' reference only]
Try to keep copies of 1.3.1 and 1.3.2 in separate folders.
First, run 1.3.2 and try it out;
Then exit, go to the folder of 1.3.1 and run OpenTTD.exe and try again.
If your 1.3.1 works normally then it's probably a 1.3.2 bug.
Otherwise it's probably configuration related, as suggested by other boardmates.
你在建设铁路时有没有尝试把画面置中在浮标位置？mfans wrote:The problem came again, please review my game config.
置中是用 C 键的，但那键同样会触发「转换铁轨」功能
还有，你是否在 1.3.1 也遇上这情况？
Did you try to center the view?
It uses the hot-key C according to your config,
but that key triggers "Convert Rail" as well.
And did you meet the same problem on 1.3.1?
你在 1.3.2 发现这问题之前，在 1.3.1 (或更早的版本) 玩是不是没有问题？mfans wrote:I didn't use hotkey to center the railway building menu. Now 1.3.1 is the same problem.
I will download 1.3.2 again to find it is OK ir not.
Before you found this problem on 1.3.2, was it OK when you played 1.3.1 (or an earlier version)?
Users browsing this forum: No registered users and 5 guests