Dabas wrote:I can't say in %, but the Siemens Combino or whatever it is is not much wider then tracks, so it should by more narrow. Length seem ok, each articulated part should be not longer than half a tile long, and yours are a little longer than that. And if it is a Siemens Combino, could you make it also in Poznań MPK configuration/livery?
It's a Siemens, but not a Combino, it's an Ultra Low Floor Vienna.
Indeed the rails are a good reference point: (Camera coordinates: X=2000, Z= 1160 FOV= 45 deg)
I found an issue with the Wood Truck. In its south-east direction, while loading, it shifts. This is due to the Loaded Truck being longer then the unloaded truck.
Attachments
Wood Truck shifts while loading..
WoodTruck Issue.png (121.88 KiB) Viewed 6783 times
I found an issue with the Wood Truck. In its south-east direction, while loading, it shifts. This is due to the Loaded Truck being longer then the unloaded truck.
I noticed this problem too.
But because CryingCorvus is update his sprites for a better overlay for company colors, I'll wait untill he has updated his wood trucks. All other trucks I've newly encoded, where done with an other way of doing it, thus this jumping of truck should be over in those files
Just wait, it will be taken care of
Hey guys,
Here's just a preview of the Monorail tunnel entrance. Ignore the grass as it will be replaced with standard grass.
Preview, Comments?
MonorailTunnel.png (202.03 KiB) Viewed 6403 times
All comments welcome.
Rom 1:16 For I am not ashamed of the gospel of Christ, for it is the power of God unto salvation to every one that believes...
Mat 10:32 "So I will acknowledge in front of my Father in heaven that person who acknowledges me in front of others.
Mat 10:33 But I will tell my Father in heaven that I don't know the person who tells others that he doesn't know me.
j0rdax wrote:Hey guys,
Here's just a preview of the Monorail tunnel entrance. Ignore the grass as it will be replaced with standard grass.
MonorailTunnel.png
All comments welcome.
looking good, but the bottem doesnt seem right to me, i like the circular tube tunnel, but in my opinion:
1) Monorail tunnels can be either more futoristic (more square, concreteish as in one of those renewal sets)
2) or they are more old-school as in metro
3) the gutter from the monorail should continue into the tunnel, and thus the tunnel bottem ring shouldnt be closed as it is now... (hope you understand what i mean...)
PS: And I stopped the propaganda to support Dave Worley since he got a nice new red hat now.[/color]
I know I have a BBCode error in my signature but I really cba to fix it.
ZxBiohazardZx wrote:looking good, but the bottem doesnt seem right to me, i like the circular tube tunnel, but in my opinion:
1) Monorail tunnels can be either more futoristic (more square, concreteish as in one of those renewal sets)
2) or they are more old-school as in metro
3) the gutter from the monorail should continue into the tunnel, and thus the tunnel bottem ring shouldnt be closed as it is now... (hope you understand what i mean...)
Rom 1:16 For I am not ashamed of the gospel of Christ, for it is the power of God unto salvation to every one that believes...
Mat 10:32 "So I will acknowledge in front of my Father in heaven that person who acknowledges me in front of others.
Mat 10:33 But I will tell my Father in heaven that I don't know the person who tells others that he doesn't know me.
LordAzamath wrote:You know that you may always remodel the tanks to make them one styles (take a look at the ladders for example) for I've lost the blend files
i might give them a go later, i will try other oil refinery bits as well...
LordAzamath wrote:You know that you may always remodel the tanks to make them one styles (take a look at the ladders for example) for I've lost the blend files
PS: And I stopped the propaganda to support Dave Worley since he got a nice new red hat now.[/color]
I know I have a BBCode error in my signature but I really cba to fix it.
Hey guys,
In case you miss it I'd like to point you towards this thread where Jupix has put up a central repository for .blend files and textures so you don't have to trawl through 200 page threads any more:
Also, I have modeled the tubular bridge in Total Bridge Renewal Set (link to wiki). This is only a GIMP mockup with the model over the girder bridge.
I have modeled it with Blender, and adding some torus. It is in a early stage. The entrances are the same of the girder bridge. The sprites 0 and 1 can be modeled using this sprite.
Attachments
Mockup.
puente_tubo.JPEG (284.54 KiB) Viewed 1196 times
Modeled sprite
tubular_bridge.PNG (36.18 KiB) Viewed 5394 times
Sorry if my english is too poor, I want learn it, but it isn't too easy.
i have decided that i will go build the whole oil refinery this week, expect most of it to be done monday, tuesday, thursday and friday, 1 day miracles:)