AuzObjects

[KahlilGibran]

more water stuff !

lock preview.PNG

please comments on that lock, so i can maybe modify it before it get released

what grf is this? i can't find it

[GarryG]

what grf is this? i can't find it

Romazoon can't answer you as he no longer with us.

All of Romazoon objects are in his Romazoon Objects that was released on Bananas earlier in year..

[GarryG]

Been farming planting banana trees.

Bananas2.png (44.29 KiB) Viewed 2256 times

Something I started months ago and forgot about it. Found them again this morning so thought I better finish it.

[GarryG]

Experimenting again .. previously I did auto lay creeks, fake roads, and Wharves, but wonder what else could be auto lay so easier to use in game save hunting for pieces.

So I tried the High Jetty. If the Jetty was center of the tile, it be easy, but I want the Jetty to be to the side of the tile so you can moor your boat to at least one side of the Jetty.

This means you have a NEAR SIDE and a FAR SIDE for the Jetty. Making them auto lay also allows 4 types of Jetties.

In this image Left is a NEAR SIDE side, next is FAR SIDE, then a NEAR SIDE with fence and to far right FAR SIDE with fence.

The one on left will auto connect to the shore, but the other 3 they have separate shore pieces.

JettyHigh05.png (6.84 KiB) Viewed 2136 times

No hunting for junctions and corners.
This sample what can be built.

AutoLayJetty.png (42.86 KiB) Viewed 2136 times

If this successful I can delete most of the Jetties in the AusWaterObjects and replace with these auto lay types and make room for more types.

These are in a file named "Auz Object Tests" and will be in the Object Selection "AuzWater: Jetty"

Appreciate if some of you could test for me. Joining a NEAR SIDE and a FAR SIDE not real easy. If we thing it needed will see if I can make some separate pieces to link the 2 sides.

Cheers

[GarryG]

I just made up some templates with coding for Autolay 32 bit graphics and also Autolay 32 bit Animated Graphics.

I done these for use on water but can also be used on land.

Hope eventually to do objects that I done in autolay before, t convert them to 32 bit autolay.

Other items I looking at making autolay are the Jettys (as show in last post) Fences and maybe some power poles.

Much thanks to McZapkie who taught me the Autolay for creeks and rivers over a year ago.

If your into coding and like to make anything in 32 bit that is auto lay, your welcome to use these.

In these you will find the source for the Jetty in above post which is 8 bit graphics and the source for the 32 bit graphics.

Hope they are useful for you to use.

They will upload into "AuzTest: AutoLayTest" for you to view.

[GarryG]

Who remembers the singing group called The Drifters? Just been listening to some of their songs and one of the songs gave me a idea.

Who remembers the song Under The Broadwalk?

The Jettys I been making, I going back to the drawing board and make some that start from a beach so the lovers at low tide can go Under The Broadwalk out of the sun.

Under The Broadwalk.png (12.41 KiB) Viewed 1998 times

The walk way on the Jetty trying a new style using colours from actual Jettys. Suppose to look weathered and well worn towards the middle and darker to the side where people not walk as much. Some times 32 bit looks nice and some things I find the old 8 bit looks better.

Also made a new Bus Station today. Highly based on some Greyhound Bus Stations.

Under The Broadwalk.png (12.41 KiB) Viewed 1998 times

The can be 2 tiles long or longer. The top 2 do not have any overlaps where the bottom 2 do have overlaps that hide the bus zones. These only in the object set at moment. Hope to add them to non-track station set soon as well.

Some other projects I done .. In my screenshot in the screenshot competition, to the left you can see some logs burning where the farmer is clearing land for more crops. These only 8 bit for now.

Hope to upload some object sets by end of week.

[Quast65]

The Jettys I been making, I going back to the drawing board and make some that start from a beach so the lovers at low tide can go Under The Broadwalk out of the sun.

Very nice!

Dont forget to remove these animated watercolors on the sand:

Example540.png (75.98 KiB) Viewed 1928 times

Maybe even consider removing them also on the shallow waters.. Depends on how it looks in action in game...

Also made a new Bus Station today. Highly based on some Greyhound Bus Stations.

Also very nice!

Spotted a few tiny pixels:

Example541.png (90.28 KiB) Viewed 1928 times

A personal opinion, but I think the texture of the roof is very subtle, a bit more "dirty/gritty" could be nice.

[GarryG]

Very nice! Dont forget to remove these animated watercolors on the sand:

Glad you like .. I will remove those water splashers

In the shallow water will experiment there to see where they still look good and where not needed.

Also very nice! Spotted a few tiny pixels:

Thanks for that will fix.

A personal opinion, but I think the texture of the roof is very subtle, a bit more "dirty/gritty" could be nice.

I think your right .. shall try a few other ideas see how they look.

Cheers

[2TallTyler]

I love those bus terminals. Very Streamline Moderne.

[GarryG]

I love those bus terminals. Very Streamline Moderne.

As soon as I fix those pixels that are out of place and make the roof a bit more dirtier will upload it so all can try.

[GarryG]

How does this look for those bus stations .. to make the roof not so clean I sent a herd of elephants across the top and this the results.

Bus terminal 37.png (70.66 KiB) Viewed 1870 times

Also extended the awning with the overlap sections to cover the bus zones.

We don't really need the buildings both sides of the road, so I see what other idea I can come up with to replace a building.

Hope tomorrow or day after have it ready for uploading.

Cheers

[Quast65]

How does this look for those bus stations .. to make the roof not so clean I sent a herd of elephants across the top and this the results.

Your elephants deserve some good food tonight, looks great!

[GarryG]

Your elephants deserve some good food tonight, looks great!

I'll give them some extra peanuts as they go nuts over them.

Made a few more overlaps with those bus station and put kids playgrounds on over side of the road.

Bus terminal 38.png (58.47 KiB) Viewed 1792 times

You can try it if like .. game file been uploaded too.

Hope over the weekend to make them non-track station tiles.

[temporal8]

Great job, Those old style bus stations remind me the old american diner´s.

[GarryG]

Great job, Those old style bus stations remind me the old american diner´s.

They not a bad idea. Probably could use some of the carriages in 2cc or from my own train set to make some of those.

Just a matter of removing the bogies from under them and a new paint job.

Also seen some trams done up as cafes too.

[GarryG]

I made some Bus Shelters with overlaps that go over the top of the games default ones.

Bus terminal 39.png (51.72 KiB) Viewed 1660 times

Each bus shelter has several options so not need be same.

These are not snow aware yet as deciding did I pick the right pieces like playgrounds, newspaper stand, toilet block, basketball courts and the aerial and how to snow them.

The blue bus station hope to make one more of a different colour and maybe add a few windows.

This most likely be the last AuzObjectAddOns with Bus and Truck Terminals .. think it time for it to have its own Object set.

There are 196 objects in the set and 150 of them are related to buses and trucks. It will be after the weekend before I make the new object set.

Any suggestions on how to improve the Object Selection Menu to find things for the new object set .. let me know.

[GarryG]

Made a set of Autolay Pathways.

Originally had them as single tiles where you had to choose the pieces individually. Now you can autolay them.

You have 4 choices .. 2 without people and two with people. The slope pieces are stairs and with people.

Autolay Pathways.png (96.5 KiB) Viewed 1633 times

There is still a set of single tile straight pieces, the T-Junctions and the toilet blocks for those who want to join these to other things.

See what other pathways I can make at a later date.

[fridaemon]

Couldn't you upload it before I sent my screenshot to August Competition???
Is it really in WaterAddons? Nice work

[GarryG]

I've started coding in the bus and truck objects into the Auz Bus and Truck Terminals station set. Probably take me a day or three as so many to do.

I been thinking The object pieces for the buses and truck do we really need them as objects? I think they be a lot better if all was places in the non-track station sets .. that way they will help expand the bus station and truck loading bays area of coverage. The object ones are basically dead pieces and reduce the revenue and cargo available.

The object ones I did so far will be transferred into their own object set after the weekend and will only add pieces that can not be made a non-track station piece such as water based tiles.

If you have no objections from now on all pieces I make for the buses stations and truck loading bays will only go in the "Auz Bus and Truck Terminals station set".

Cheers all

[fridaemon]

I been thinking The object pieces for the buses and truck do we really need them as objects?

Better way is of course as non-track version. But as you said before - it's not possible to do snowy versions of them (remember well?). But I have few railway stations sets which support this option, for example Japan Set3: Stations.