American Bridge Replacement Set [0.5.0 Released 12-13-2020]
Moderator: Graphics Moderators
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Hi Andrew,
Here all my sprites and coding.
The Coding for road in the Cougal Bridge not complete as only testing the rail bridge. Intend to transfer the Rail bridge over to replace the Stone Rail Bridge.
Any one else want to use these your welcome to do so.
Cheers
Garry
Here all my sprites and coding.
The Coding for road in the Cougal Bridge not complete as only testing the rail bridge. Intend to transfer the Rail bridge over to replace the Stone Rail Bridge.
Any one else want to use these your welcome to do so.
Cheers
Garry
- Attachments
-
- AuzbridgeTest.rar
- (395.56 KiB) Downloaded 177 times
Soot Happens
Screenshot Of The Month Winner March 2020
All my projects are GPLv2 License unless stated.
Auz Road Sets: viewtopic.php?f=29&t=87335
Auz Project Releases: viewtopic.php?f=67&t=84725
Auz Trains: http://www.tt-forums.net/viewtopic.php?f=26&t=74193
Auz Industry Sets: http://www.tt-forums.net/viewtopic.php?f=26&t=74471
Auz Objects: viewtopic.php?f=26&t=75657
Auz Bridges: viewtopic.php?f=26&t=75248
Auz Stations: viewtopic.php?f=26&t=76390
Auz Tracks: viewtopic.php?f=26&t=82691
Auz Subway Stations: viewtopic.php?f=26&t=85335
Auz Eyecandy TramTracks: viewtopic.php?t=89908
Screenshot Of The Month Winner March 2020
All my projects are GPLv2 License unless stated.
Auz Road Sets: viewtopic.php?f=29&t=87335
Auz Project Releases: viewtopic.php?f=67&t=84725
Auz Trains: http://www.tt-forums.net/viewtopic.php?f=26&t=74193
Auz Industry Sets: http://www.tt-forums.net/viewtopic.php?f=26&t=74471
Auz Objects: viewtopic.php?f=26&t=75657
Auz Bridges: viewtopic.php?f=26&t=75248
Auz Stations: viewtopic.php?f=26&t=76390
Auz Tracks: viewtopic.php?f=26&t=82691
Auz Subway Stations: viewtopic.php?f=26&t=85335
Auz Eyecandy TramTracks: viewtopic.php?t=89908
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Awesome, thanksGarryG wrote:Hi Andrew,
Here all my sprites and coding.
The Coding for road in the Cougal Bridge not complete as only testing the rail bridge. Intend to transfer the Rail bridge over to replace the Stone Rail Bridge.
Any one else want to use these your welcome to do so.
Cheers
Garry
========
In other news, today is another day, so I suppose I'll show off the other cable-stayed bridge I've been working on:
Again, this is only a mockup and needs a little touchup, but otherwise just about done This specific bridge is heavily inspired by the Nhat Tan bridge in Vietnam, although this style of cable-stayed bridge is fairly common around the world, with at least a couple of examples in the US.
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Lovely bridges, but is there any way to disable railtypes for the wooden one?
- Attachments
-
- Näyttökuva 2018-09-11 kello 15.57.55.png (216.54 KiB) Viewed 18731 times
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Railtypes are usually applied as an overlay when a bridge is built from the railtype menu.alluke wrote:Lovely bridges, but is there any way to disable railtypes for the wooden one?
Did you try building the bridge from the default rail menu?
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
-
- Chief Executive
- Posts: 675
- Joined: 03 Apr 2016 20:19
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Railtypes aren't like roadtypes. It's entirely possible and common for the default rails to be replaced by a tracktype.wallyweb wrote:Railtypes are usually applied as an overlay when a bridge is built from the railtype menu.alluke wrote:Lovely bridges, but is there any way to disable railtypes for the wooden one?
Did you try building the bridge from the default rail menu?
Licenses for my work...
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Hi there, unfortunately there's currently no way to disable railtypes for bridges, so unless you use a railtype set which does not overwrite the default rails, there's no way to avoid this. It would definitely be on my ultimate wishlist of new bridge features though, along with custom bridge layouts and multi-part bridge heads (among many others), but it will not likely happen.alluke wrote:Lovely bridges, but is there any way to disable railtypes for the wooden one?
Re: American Bridge Replacement Set [0.1.0 Released 4-30-18]
Keep in mind that JGR has implemented two bridge properties that were originally developed by cirdan for his New Map Features:Andrew350 wrote:Hi there, unfortunately there's currently no way to disable railtypes for bridges, so unless you use a railtype set which does not overwrite the default rails, there's no way to avoid this. It would definitely be on my ultimate wishlist of new bridge features though, along with custom bridge layouts and multi-part bridge heads (among many others), but it will not likely happen.alluke wrote:Lovely bridges, but is there any way to disable railtypes for the wooden one?
- Three additional bridge IDs
- Custom GUI icons (Especially handy when modifying the recolour bridges).
What would be really useful would be multiple bridge sets per game.
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
Re: American Bridge Replacement Set [0.2.0 Released 9-28-18]
Small update today
I'm going ahead and releasing 0.2.0, which is a relatively minor update which adds the plate girder rail bridge, the concrete viaduct road bridge, and changes the rail version of the steel truss bridge into a cantilever style. Here is the set as it stands with this release:
Please note that I've shifted around some of the internal bridge IDs so the new gui icons make more sense and to get the set ready for additional bridges; unfortunately this means broken savegame compatibility. On the plus side though I shouldn't have to do that again, so future updates should be savegame safe
Also note that this is a relatively quick-and-dirty release, at least for me, so there may be a goof or two. If all goes well, the next update should contain the cable-stayed bridges shown earlier as well as some other bridges (mostly road/rail counterparts to existing ones, which aren't done yet) and some other improvements to provide a better overall polish .
Enjoy!
I'm going ahead and releasing 0.2.0, which is a relatively minor update which adds the plate girder rail bridge, the concrete viaduct road bridge, and changes the rail version of the steel truss bridge into a cantilever style. Here is the set as it stands with this release:
Please note that I've shifted around some of the internal bridge IDs so the new gui icons make more sense and to get the set ready for additional bridges; unfortunately this means broken savegame compatibility. On the plus side though I shouldn't have to do that again, so future updates should be savegame safe
Also note that this is a relatively quick-and-dirty release, at least for me, so there may be a goof or two. If all goes well, the next update should contain the cable-stayed bridges shown earlier as well as some other bridges (mostly road/rail counterparts to existing ones, which aren't done yet) and some other improvements to provide a better overall polish .
Enjoy!
- Attachments
-
- american_bridges.tar
- (122.5 KiB) Downloaded 246 times
-
- american_bridges_source_0.2.0.zip
- (144.55 KiB) Downloaded 203 times
Re: American Bridge Replacement Set [0.2.0 Released 9-28-18]
Very Nice indeed!
Edit1: Will there be other track support planned?
Edit2: Nvm me. just got it work as I wished! Nice stuff!
Edit1: Will there be other track support planned?
Edit2: Nvm me. just got it work as I wished! Nice stuff!
TT-Screenshot Of The Month - 2012 July, winner!
TT-Screenshot Of The Month - 2013 May, winner tie with Purno!
TT-Screenshot Of The Month - 2014 February, winner!
TT-Screenshot Of The Month - 2014 June, winner tie with alluke!
TT-Screenshot Of The Month - 2014 April, winner!
My screen shot thread ---> Have a look
TT-Screenshot Of The Month - 2013 May, winner tie with Purno!
TT-Screenshot Of The Month - 2014 February, winner!
TT-Screenshot Of The Month - 2014 June, winner tie with alluke!
TT-Screenshot Of The Month - 2014 April, winner!
My screen shot thread ---> Have a look
Re: American Bridge Replacement Set [0.3.0 Released 1-17-19]
Hi all, small update today
Finally, after several months and a new year, I've managed to cobble together enough progress for a decent release. The 'big' new feature is the addition of the cable-stayed bridges shown in the preview pics earlier. I've polished them up and made some tweaks from the teasers but mostly they look the same.
I've also made some big changes to two of the existing bridges, adding some much-needed cribbing to the wooden railroad trestle with a small recolor (ideas stolen from GarryG ), and I also repainted the steel cantilever railroad bridge in a rusty white color. These changes can be seen in the image below:
In addition to the obvious visual changes I also added some proper speed limits and introduction dates for all the bridges included so far, both of which I hope to make configurable in the future (once I figure out how ). In fact, here's a handy little table I made to track what's done in the set so far:
Also with this release I've decided to go ahead and make this set available on BaNaNaS for easier consumption (and yes, this version is compatible with the previous release!).
Go ahead and let me know what you think, good or bad, otherwise I hope you enjoy it!
Finally, after several months and a new year, I've managed to cobble together enough progress for a decent release. The 'big' new feature is the addition of the cable-stayed bridges shown in the preview pics earlier. I've polished them up and made some tweaks from the teasers but mostly they look the same.
I've also made some big changes to two of the existing bridges, adding some much-needed cribbing to the wooden railroad trestle with a small recolor (ideas stolen from GarryG ), and I also repainted the steel cantilever railroad bridge in a rusty white color. These changes can be seen in the image below:
In addition to the obvious visual changes I also added some proper speed limits and introduction dates for all the bridges included so far, both of which I hope to make configurable in the future (once I figure out how ). In fact, here's a handy little table I made to track what's done in the set so far:
Code: Select all
id | type | year | speed | transport types
----------------------------
00 wood - 0 - 25 mph - road + rail
01 stone - 0 - 35 mph - road + rail
02 steel truss - 1870 - 50 mph - road + rail
03 cable-stayed - 1990 - 200 mph - road + rail
04 - - -
05 - - -
06 plate girder - 1920 - 70 mph - rail
07 concrete - 1960 - 120 mph - road
08 - - -
09 covered - 1850 - 40 mph - road
10 - - -
11 - - -
12 - - -
Go ahead and let me know what you think, good or bad, otherwise I hope you enjoy it!
- Attachments
-
- american_bridges.tar
- (166 KiB) Downloaded 207 times
-
- american_bridges_source_0.3.0.zip
- (290.15 KiB) Downloaded 173 times
Re: American Bridge Replacement Set [0.3.0 Released 1-17-19]
Very nicely done.
Glad to see people pinching ideas from me as for years I been pinching from others.
Cheers pal
Glad to see people pinching ideas from me as for years I been pinching from others.
Cheers pal
Soot Happens
Screenshot Of The Month Winner March 2020
All my projects are GPLv2 License unless stated.
Auz Road Sets: viewtopic.php?f=29&t=87335
Auz Project Releases: viewtopic.php?f=67&t=84725
Auz Trains: http://www.tt-forums.net/viewtopic.php?f=26&t=74193
Auz Industry Sets: http://www.tt-forums.net/viewtopic.php?f=26&t=74471
Auz Objects: viewtopic.php?f=26&t=75657
Auz Bridges: viewtopic.php?f=26&t=75248
Auz Stations: viewtopic.php?f=26&t=76390
Auz Tracks: viewtopic.php?f=26&t=82691
Auz Subway Stations: viewtopic.php?f=26&t=85335
Auz Eyecandy TramTracks: viewtopic.php?t=89908
Screenshot Of The Month Winner March 2020
All my projects are GPLv2 License unless stated.
Auz Road Sets: viewtopic.php?f=29&t=87335
Auz Project Releases: viewtopic.php?f=67&t=84725
Auz Trains: http://www.tt-forums.net/viewtopic.php?f=26&t=74193
Auz Industry Sets: http://www.tt-forums.net/viewtopic.php?f=26&t=74471
Auz Objects: viewtopic.php?f=26&t=75657
Auz Bridges: viewtopic.php?f=26&t=75248
Auz Stations: viewtopic.php?f=26&t=76390
Auz Tracks: viewtopic.php?f=26&t=82691
Auz Subway Stations: viewtopic.php?f=26&t=85335
Auz Eyecandy TramTracks: viewtopic.php?t=89908
Re: American Bridge Replacement Set [0.3.0 Released 1-17-19]
I've been slowly working on revamping the covered road bridge to fix some mistakes along with improving the texture a little. Meanwhile I also got around to making the rail counterpart for it:
The plan for releasing 0.4 is to at least get both road and rail versions for all existing bridges, so the plate girder and concrete viaduct will get their partners as well. No clue when that might happen, but I'm working on it
The plan for releasing 0.4 is to at least get both road and rail versions for all existing bridges, so the plate girder and concrete viaduct will get their partners as well. No clue when that might happen, but I'm working on it
-
- Route Supervisor
- Posts: 466
- Joined: 15 Jun 2007 09:27
- Skype: madchimiste
- Location: Berlin, Deutschland
Re: American Bridge Replacement Set [0.3.0 Released 1-17-19]
Really nice graphics!
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
Hello all, since today marks one year since the initial test release I thought it would be a good day to drop an update
Nothing too big this time, but as promised above this update fleshes out the existing bridge types so that all of them now have road and rail versions. Unfortunately I couldn't quite squeeze in the monorail and maglev versions like I was hoping, but they would have basically been copies of the rail versions anyway, so not too important. Maybe next time.
Here's a little preview of the rail version of the concrete viaduct, one of the new bridges in 0.4.0:
As usual, the set can be downloaded here or on Bananas. Enjoy
Nothing too big this time, but as promised above this update fleshes out the existing bridge types so that all of them now have road and rail versions. Unfortunately I couldn't quite squeeze in the monorail and maglev versions like I was hoping, but they would have basically been copies of the rail versions anyway, so not too important. Maybe next time.
Here's a little preview of the rail version of the concrete viaduct, one of the new bridges in 0.4.0:
As usual, the set can be downloaded here or on Bananas. Enjoy
- Attachments
-
- american_bridges.tar
- (195 KiB) Downloaded 202 times
-
- american_bridges_source_0.4.0.zip
- (404.7 KiB) Downloaded 272 times
-
- Chief Executive
- Posts: 675
- Joined: 03 Apr 2016 20:19
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
I found out that this set causes a glitch with the tube bridges...Andrew350 wrote:Hello all, since today marks one year since the initial test release I thought it would be a good day to drop an update
Nothing too big this time, but as promised above this update fleshes out the existing bridge types so that all of them now have road and rail versions. Unfortunately I couldn't quite squeeze in the monorail and maglev versions like I was hoping, but they would have basically been copies of the rail versions anyway, so not too important. Maybe next time.
Here's a little preview of the rail version of the concrete viaduct, one of the new bridges in 0.4.0:
Nelson Transport, Jan 23rd, 2091.png
As usual, the set can be downloaded here or on Bananas. Enjoy
- Attachments
-
- screenshot.png
- Notice the incorrect sprite on the far side of the tube bridges.
- (467.45 KiB) Not downloaded yet
Licenses for my work...
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
Thanks for letting me know. It took a bit of squinting to see it, but indeed it is the incorrect sprite.SimYouLater wrote:I found out that this set causes a glitch with the tube bridges...
One of the sprites in the default bridge tables must be wrong; I'll do some checking later to see if it's just my doing somehow, or perhaps if it exists in FooBar's original example
Also, while checking this in OpenTTD, I happened to notice an unrelated problem with RattRoads as well, so two bugs for the price of one!
-
- Chief Executive
- Posts: 675
- Joined: 03 Apr 2016 20:19
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
If it helps, if I load the Monkey Bar bridge NewGRF with ABRS to replace the tube bridge, a similar glitch occurs...Andrew350 wrote:Thanks for letting me know. It took a bit of squinting to see it, but indeed it is the incorrect sprite.SimYouLater wrote:I found out that this set causes a glitch with the tube bridges...
One of the sprites in the default bridge tables must be wrong; I'll do some checking later to see if it's just my doing somehow, or perhaps if it exists in FooBar's original example
Also, while checking this in OpenTTD, I happened to notice an unrelated problem with RattRoads as well, so two bugs for the price of one!
- Attachments
-
- Nelson & Co., 01_02_2100.png (141.98 KiB) Viewed 15945 times
Licenses for my work...
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
Hmm, this might be something to report to Froix then (assuming this happens when loaded by itself, also)SimYouLater wrote:If it helps, if I load the Monkey Bar bridge NewGRF with ABRS to replace the tube bridge, a similar glitch occurs...
Meanwhile, as I suspected the problem is simply a mix-up of sprite numbers in the default bridge code posted by FooBar on the wiki (which I used to create the templates for the bridges in my code). It's a simple fix, just changing a few hex codes, and I'll look into trying to fix the code on the wiki as well to prevent it from spreading further.
Honestly I don't think that part of the code even needs to be there in my set since I don't even touch those bridges (yet), but I guess it aided in finding a mistake in the template code which any future bridge GRF authors will likely use, so I guess it works out
-
- Chief Executive
- Posts: 675
- Joined: 03 Apr 2016 20:19
Re: American Bridge Replacement Set [0.4.0 Released 4-30-19]
Unfortunately, it doesn't occur when loaded by itself, only when used with ARBS.Andrew350 wrote:Hmm, this might be something to report to Froix then (assuming this happens when loaded by itself, also)SimYouLater wrote:If it helps, if I load the Monkey Bar bridge NewGRF with ABRS to replace the tube bridge, a similar glitch occurs...
Licenses for my work...
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
You automatically have my permission to re-license graphics or code by me if needed for use in any project that is not GPL v2, on the condition that if you release any derivatives of my graphics they're automatically considered as ALSO GPL v2 (code may remain unreleased, but please do provide it) and carry this provision in GPL v2 uses.
Please ask someone in-the-know to be sure that the graphics are done by me. Especially TTD-Scale, long story.
Who is online
Users browsing this forum: No registered users and 82 guests