nicehthhs wrote:I've added the ability to enter timetable start dates as text (in hhmm format) instead of using the date gui when "Show time in minutes rather than days" is enabled. Enable Interface > "Enter timetable start times as text ..." to do this.
Any leading zeroes in the time may be omitted, so e.g. 0120 may be entered as 120, and 0005 may be entered as 5.
The first post in the thread has been updated with the new diff. Enjoy!
[Patch] Departure boards, 24h clock + binary 25 (r27452)
Moderator: OpenTTD Developers
Re: [Patch] Departure boards, 24h clock + binary
- Level Crossing
- Tycoon
- Posts: 1187
- Joined: 07 Feb 2011 22:04
- Location: East Coast, United States
Re: [Patch] Departure boards, 24h clock + binary
I have a suggestion that (IMO) would improve this patch...
Can you make an option to show only one departure instead of several identical ones at the same time? For example, if I have 5 buses departing at the same time to the same place, only one will be shown.
Is this possible?
Can you make an option to show only one departure instead of several identical ones at the same time? For example, if I have 5 buses departing at the same time to the same place, only one will be shown.
Is this possible?
Like my avatar? See my screenshot thread
Re: [Patch] Departure boards, 24h clock + binary
Done use the setting Interface > Departure boards > Merge identical departures.
The first post of the thread has been updated with the new diff.
Edit: binary updated too.
The first post of the thread has been updated with the new diff.
Edit: binary updated too.
- Norfolkadam
- Engineer
- Posts: 77
- Joined: 11 Jun 2010 19:16
- Location: Norfolk, UK
- Contact:
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
I was just wondering if there is any way to stop the time appearing as 03:.. in the timetabling window half the time and instead have the actual arrival/departure time all the time?
Helmland - The English and Danish island in the North Sea
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
That doesn't happen for me please can you post a screenshot of what's happening?
- Norfolkadam
- Engineer
- Posts: 77
- Joined: 11 Jun 2010 19:16
- Location: Norfolk, UK
- Contact:
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
Here's a screenshot for you. You can see that some of the times in the timetable are 05:.. etc
- Attachments
-
- Bedested Transport, 8th Dec 2854.png
- (323.16 KiB) Downloaded 7 times
Helmland - The English and Danish island in the North Sea
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
Looks to me like a font size issue.Norfolkadam wrote:Here's a screenshot for you. You can see that some of the times in the timetable are 05:.. etc
(British) Modular Stations Set - Thread: | Website:
Swiss Set - Thread: | Website:
Route Map Creator
My Screenshot Thread
Swiss Set - Thread: | Website:
Route Map Creator
My Screenshot Thread
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
it's the same issue as mentioned here: http://www.tt-forums.net/viewtopic.php?p=927020#p927020
are you using an outdated patch?
are you using an outdated patch?
Re: [Patch] Departure boards, 24h clock + binary 24 (r23954)
I don't have time to fix it properly this week, but here's a quick and dirty hack that should work...
- Attachments
-
- departureboardswallclock24_1-r23974.diff
- (126.48 KiB) Downloaded 231 times
Re: [Patch] Departure boards, 24h clock + binary 24 (r24156)
Can anyone compile this for OSX, as I'm stupid and can't do it
Please?
Please?
Re: [Patch] Departure boards, 24h clock + binary 24 (r24156)
I would, but unfortunately I don't have a mac. All I can do is point you at the instructions on the wiki.
It seems to me that the simplest way to do it is to:
* Install MacPorts and the libraries required to compile OpenTTD (instructions)
* Install svn (instructions)
* Get the latest source (instructions)
* Apply the patch (instructions)
* Compile (instructions)
Good luck! The hardest part is getting it set up and compiling successfully for the first time. Subsequent compiles should be much easier.
It seems to me that the simplest way to do it is to:
* Install MacPorts and the libraries required to compile OpenTTD (instructions)
* Install svn (instructions)
* Get the latest source (instructions)
* Apply the patch (instructions)
* Compile (instructions)
Good luck! The hardest part is getting it set up and compiling successfully for the first time. Subsequent compiles should be much easier.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24263)
And in the first try please skip the "apply patch" step, to test the compiler setup.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24263)
Well thanks; I'll give it a go but I've never managed it before!
Re: [Patch] Departure boards, 24h clock + binary 24 (r24474)
Is there some way to change the current time on the clock (and also change all timetables accordingly)? Due to some bugs, my attempt at creating 24h timetables have been screwed over by the clock being faster than the ingame ticks if you are having FPS drops in game (for example after playing a very heavy map.
What I want to do is basically to just set the clock back for example 3 hours and have all the trains timetable orders also jump 3 hours back (so no trains are delayed/early, it's just like for example if you adjusted for DST).
What I want to do is basically to just set the clock back for example 3 hours and have all the trains timetable orders also jump 3 hours back (so no trains are delayed/early, it's just like for example if you adjusted for DST).
Re: [Patch] Departure boards, 24h clock + binary 24 (r24576)
I've added a clock offset setting that should allow you to do what you want. Patch updated in the first post of the thread.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24576)
Great, cheers for the update!hthhs wrote:I've added a clock offset setting that should allow you to do what you want. Patch updated in the first post of the thread.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24576)
you should probably automatically update this offset when using the year cheat (or looping the end year), to have the time stay constant?hthhs wrote:I've added a clock offset setting that should allow you to do what you want. Patch updated in the first post of the thread.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24576)
I'd like to report a few issues I noticed with this patch in the version present in the latest ChilPP (sorry if you already fixed the problems in later versions)
The easiest issue:
I play with both the train name and the group name showing on the board. However, it seems there's no space at all reserved between those two fields, resulting in the groupname being behind the train name without any kind of separation for the longest train names on the board. For now I fixed it by starting all my groupnames with a space, but it would be nicer if the patch could handle that
The other issue:
I play with "Handle conditional order jumps by assuming they will not be taken". Mostly, that works fine, but I get the feeling something weird happens when an unconditional jump is encountered. Could it be that the patch still thinks it will not be taken ?
My orders are roughly like this (simplyfied, but the essence remains)
Everything works fine for the jumps in lines 2 and 5, but the jump in line 7 seems to ignored even when it's unconditional.
In fact, my timetable seems to be consistent with assuming unconditional jumps will not be made. Once the jump is actually made, the correct information suddenly appears on the board.
The easiest issue:
I play with both the train name and the group name showing on the board. However, it seems there's no space at all reserved between those two fields, resulting in the groupname being behind the train name without any kind of separation for the longest train names on the board. For now I fixed it by starting all my groupnames with a space, but it would be nicer if the patch could handle that
The other issue:
I play with "Handle conditional order jumps by assuming they will not be taken". Mostly, that works fine, but I get the feeling something weird happens when an unconditional jump is encountered. Could it be that the patch still thinks it will not be taken ?
My orders are roughly like this (simplyfied, but the essence remains)
Code: Select all
1 Go to A
2 Jump to 8 when requires service is true
3 Go to B
4 Go to A
5 Jump to 10 when requires service is true
6 Go to B
7 Jump to 1
8 Go to Depot
9 Jump to 3
10 Go to Depot
11 Jump to 6
In fact, my timetable seems to be consistent with assuming unconditional jumps will not be made. Once the jump is actually made, the correct information suddenly appears on the board.
Re: [Patch] Departure boards, 24h clock + binary 24 (r24576)
Does anybody able to compile OTTD with these patches together: Departure boards and Cargo distribution? And make installation package (or just zip package for unziping)?
I have some problems with compiling ottd.
Thanks
I have some problems with compiling ottd.
Thanks
Who is online
Users browsing this forum: No registered users and 18 guests