[Private] Canadian Pacific
Moderator: Locomotion Moderators
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
[Private] Canadian Pacific
Hey all,
I have started to go and create some Canadian Pacific steam locomotions starting with the 4-4-4 Jubilee.
However I have come into a bit of a problem https://drive.google.com/open?id=0B4tEh ... UxkMUFqX3c
Did I miss something when converting it. I used the old MSTS2Loco tutorial that Walter had created.
Thank-you
I have started to go and create some Canadian Pacific steam locomotions starting with the 4-4-4 Jubilee.
However I have come into a bit of a problem https://drive.google.com/open?id=0B4tEh ... UxkMUFqX3c
Did I miss something when converting it. I used the old MSTS2Loco tutorial that Walter had created.
Thank-you
Last edited by cottonmouth on 12 Jun 2016 18:17, edited 1 time in total.
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific Steam
Are you sure that the textures are also displayed the msts-model?
How look of the pictures? If the locomotive in the pictures already so bright?
I'm not quite sure whether Plasticman has already built this locomotive. (The last package on the side.)
http://www.locomotiondepot.net/amitrains/donationware
How look of the pictures? If the locomotive in the pictures already so bright?
I'm not quite sure whether Plasticman has already built this locomotive. (The last package on the side.)
http://www.locomotiondepot.net/amitrains/donationware
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific Steam
ah I see what I did wrong here... I was hoping that I could just take the .s file out and just deal with it like that... however now I understand after reading your reply that I need to take EVERYTHING out of the file and then convert it.
As to your second question. No my lord. The two that he did are of the a different class. I am making the 4-4-4 Jubilee. I believe he made a different class.
As to your second question. No my lord. The two that he did are of the a different class. I am making the 4-4-4 Jubilee. I believe he made a different class.
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific Steam
Ahh .... yes, you must not forget the .ace-files. That are important.
I'm looking forward to the result.
I'm looking forward to the result.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific Steam
I present to you for your viewing the Canadian Pacific H1E 4-6-4 Hudson
I have rated it at the following stats
Horsepower 10140 *note I feel that this is way over powered and would ask for suggestions on what it should be.
Tons 183
Speed - 90 MPH
Built 1940
Out of Service - Never, Currently the 2860 is still in Operational Service although stored at the West Coast Heritage Park in Squamish BC
I have rated it at the following stats
Horsepower 10140 *note I feel that this is way over powered and would ask for suggestions on what it should be.
Tons 183
Speed - 90 MPH
Built 1940
Out of Service - Never, Currently the 2860 is still in Operational Service although stored at the West Coast Heritage Park in Squamish BC
- Attachments
-
- Screenshot2.png (20.19 KiB) Viewed 6370 times
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific Steam
Looks very good.
But 10,140 hp ??
For comparison: The H1b have 4,700 hp .....
https://en.wikipedia.org/wiki/Canadian_Pacific_2816
I am not sure. But I think this locomotive I wanted to build even.
But 10,140 hp ??
For comparison: The H1b have 4,700 hp .....
https://en.wikipedia.org/wiki/Canadian_Pacific_2816
I am not sure. But I think this locomotive I wanted to build even.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific Steam
See I thought it was way over, I hunted high and low for the horse power of a H1E and couldn't find it. So I tried to convert the tractive effort to horsepower based off speed.
I'll adjust it when I get home tonight.
I plan on doing the H1b as well as a few others this week when I am off.
My plan is to do some older passenger cars as well.
I'll adjust it when I get home tonight.
I plan on doing the H1b as well as a few others this week when I am off.
My plan is to do some older passenger cars as well.
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
I have a couple more for you guys to see.
I am seriously starting to debate about releasing these... I just need to read up and confirm that I have everything right... or I have another idea in mind. Stay tuned.
Top Engine 4-6-2 Pacific Type. I have rated the engine at 3400 HP, i am finding it hard to figure out the HP from TF so what I have done is taken the first 4 digits and if it seems plausible I have gone with that. weight is 236 tons and build dates are between 1906 - 1961.
Second engine is a 4-6-4 H1B this class is different from the H1E as they are not streamlined. I have rated them the near the same as the H1Es with roughly the same build times. It is obsolete in 2015 as the current one 2816 is currently stored in need of repairs and CP doesn't seem inclined to fix it.
Third engine is the first engine that I started with that I had a few issues with the 4-4-4 Jubilee. Build times are 1936-1961
Current Engines that need to be done
2354 - 4-6-2 Updated, has a different look to the original possibly ran in passenger service i have to do some research.
5916 - 2-10-4 Selkirk Non streamlined engine
5930 - 2-10-4 Selkirk Stream lined
29 4-4-0
I believe that there is a few others that I need to do as well. As in a 4-8-2 Mountain and a 4-8-4 Northern, I believe I saw them but I may not have downloaded them.
Stay tuned.
I am seriously starting to debate about releasing these... I just need to read up and confirm that I have everything right... or I have another idea in mind. Stay tuned.
Top Engine 4-6-2 Pacific Type. I have rated the engine at 3400 HP, i am finding it hard to figure out the HP from TF so what I have done is taken the first 4 digits and if it seems plausible I have gone with that. weight is 236 tons and build dates are between 1906 - 1961.
Second engine is a 4-6-4 H1B this class is different from the H1E as they are not streamlined. I have rated them the near the same as the H1Es with roughly the same build times. It is obsolete in 2015 as the current one 2816 is currently stored in need of repairs and CP doesn't seem inclined to fix it.
Third engine is the first engine that I started with that I had a few issues with the 4-4-4 Jubilee. Build times are 1936-1961
Current Engines that need to be done
2354 - 4-6-2 Updated, has a different look to the original possibly ran in passenger service i have to do some research.
5916 - 2-10-4 Selkirk Non streamlined engine
5930 - 2-10-4 Selkirk Stream lined
29 4-4-0
I believe that there is a few others that I need to do as well. As in a 4-8-2 Mountain and a 4-8-4 Northern, I believe I saw them but I may not have downloaded them.
Stay tuned.
- Attachments
-
- Screenshot4.png (19.03 KiB) Viewed 6327 times
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Okay so I found some extra time to complete the 4-4-0 and the two Selkirk models.
I still only have the 4-6-2 updated model to complete and I am gonna go back and rerate all the HP for the others down lower... these models are closer to what was probably. I went into loco and checked similar hp.
Top model is a 4-4-0
Second model is 2-10-4 Selkirk non streamlined
Third model is 2-10-4 Selkirk streamlined
Both Selkirks are top of speed of 60 mph which will be changed
I still only have the 4-6-2 updated model to complete and I am gonna go back and rerate all the HP for the others down lower... these models are closer to what was probably. I went into loco and checked similar hp.
Top model is a 4-4-0
Second model is 2-10-4 Selkirk non streamlined
Third model is 2-10-4 Selkirk streamlined
Both Selkirks are top of speed of 60 mph which will be changed
- Attachments
-
- Screenshot5.png (18.85 KiB) Viewed 6315 times
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
Looks very good for my eyes. But a quick question: Are the wheels animated?
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Good question boss.
No they are not. And I am unable to keep the steam going once when it gets up to speed. As well I seem to have steam coming from the tender.
No they are not. And I am unable to keep the steam going once when it gets up to speed. As well I seem to have steam coming from the tender.
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
I know it is not easy to animate the wheels.
I'll send you a file with which your locomotives still steaming. Even if they stand still.
And because of the smoke from the tender ... check the second part. He may have entered no smoke in the vehicle creator.
I'll send you a file with which your locomotives still steaming. Even if they stand still.
And because of the smoke from the tender ... check the second part. He may have entered no smoke in the vehicle creator.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Hey boss... I am working on passenger cars now and I am having a few issues with the observation cars. When ever they go the other way the whole car flips so that the observation deck is facing towards the engine. How would I fix this?
Thanks in advance
Thanks in advance
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
You have to consider two things.
1. The end of this wagon must look forward when converting. (Turn 180 °)
2. In the Verhicle Creator, bit_0 must be set to "No". (See image)
The game turns it around automatically !!
1. The end of this wagon must look forward when converting. (Turn 180 °)
2. In the Verhicle Creator, bit_0 must be set to "No". (See image)
The game turns it around automatically !!
- Attachments
-
- capture_10102016_163252.jpg (29.46 KiB) Viewed 5903 times
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Hey,
I have done all that however it seems to still be turning. I have uploaded a file for your viewing.
I have done all that however it seems to still be turning. I have uploaded a file for your viewing.
- Attachments
-
- CDNCNOBS.xml
- (19.15 KiB) Downloaded 232 times
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
Please send me the pictures too via PM. Then I can testing the car.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
You only made 68 pictures. This is correct if both sides are identical. But in this case I need 136 pictures like a locomotive.
Another thing. Can you please send me a picture set in normal version and a picture set in rotated version?
Another thing. Can you please send me a picture set in normal version and a picture set in rotated version?
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Normal version? Like in bmp? or the s file?
- Walter1940
- Tycoon
- Posts: 983
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: [Private] Canadian Pacific
Sorry, my mistake.
I need a picture set with the end front and a picture set with the end back. )I hope you know what I mean)
And these pictures should already be finished as png.
It is important that you make 136 pictures as a locomotive.
I need a picture set with the end front and a picture set with the end back. )I hope you know what I mean)
And these pictures should already be finished as png.
It is important that you make 136 pictures as a locomotive.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
-
- Engineer
- Posts: 17
- Joined: 05 Jun 2016 14:38
Re: [Private] Canadian Pacific
Morning,
sorry about the late reply I am only able to get on the lap top during the weekend.
I am hoping this is what you are looking for.
Thanks
sorry about the late reply I am only able to get on the lap top during the weekend.
I am hoping this is what you are looking for.
Thanks
- Attachments
-
- Back&Front End pictures.zip
- (556.93 KiB) Downloaded 148 times
Who is online
Users browsing this forum: No registered users and 6 guests