Transport Tycoon Forums

Brisbane Pack.
Brisbane is the awesome city of my residence, therefore I wish to make for locomotion it's vehicles and public transport infrastructure.

I hope to include in this pack:

Buses. This is what I have started making models for.

basically if it's under here in "current buses", I want to make it. The most common type of buses in Brisbane, and the most modern all share the Volgren CR228L Body, so unless you get close, I can't tell the difference. this is why I have chosen this as the first model to produce, because I can use the same sprites for 4 or so different buses, all with different charicteristics. under the wise words of Plastikman, I have near finished the model in sketchup, and it needs to be skinned, and rendered.



Ferries.

yeah eventually, aswell as the very distinct wharves all along the river.
all of the wharves look like the same, a floating pontoon with an angle-adjustable bridge.

Trains.

yeah sometime in the near future if I can make them myself or find models for them.

anyway. if anyone can point me at stuff for converting into Lomo...
also can you convert from Trainz to loco?

regards, noof.

It's my birthday, so I have a present for you all!
it's the Diesel CR228L pack.

Looking good there.

One request. The busses operating here in Sydney are probably almost identical to those in Brisbane (except we probably have some much older buses still on the road). Most of the buses on the Gold Coast I saw the last two weeks look almost identical to what we've got here. So when it comes to skinning the buses, would it be possible for a Sydney buses skin? (really easy too - white top, blue bottom ) Veolia/Connex/others by request would be nice too, but I can help with that if I can find the time.

Doesn't look like you have them up there, but I always prefer the [url=ttp://www.sydneybuses.info/corporate/bus-flee ... 13trbl.htm]Scania L113-TRBL[/url] on my uni route - larger capacity than usual and [seem] so much more powerful than anything else in the fleet - great for climbing the hill from Central Station to Moore Park

updating bus model:

noof.

unlike other 3d programs. i find it easier to texture first in sketchup, THEN do the detail work.

Just make sure you switch the texture to "projected" first. then when you push pull the details like the AC on the roof or the doors... they auto texture.

Nice, noofnoof. Is that the picture you sent me on Facebook?

I look forward to download all of them =)

HA! you thought I'd given up on these. well... I kinda did, but: Can anyone assist(help, suggest tools, point at good information) me in rendering these into locomotion? I know Zeak can, however he's at sea...

Wow, those traffic lights at the front looks so detailed. It does really look like Transfail bus services in Brisbane Translink services is very terrible here

Again, looking forwarded to download them =)

What i'll suggest is lowering the front fan thing on the roof a little.
Oh; and rounding off the top corners; to do this, you simply create a curve on one part, then just drag it all the way to the rear, and it will remove and delete it-self, creating a nice curve.

You had the same idea as I did, and just wait for zeak; what I may also suggest, make a few models, as it doesnt take him too long to import them into locomotion, its mainly the whole creating part that takes it time.

Thanks Blender, you mean create a curve at then push it the entire length of the bus? I guess that makes sense. yeah that can(has been) be done.

looking at pictures of this bus in Sydney, their air-conditioning on the roof is not as extensive as brisbane. I walk over the busiest road* for buses everyday and so I get a good look at the roof of them. my motivation for this project is everytime I see one of these buses (10 times a day minimum) I go "DAMN I need that for Locomotion..."

Blender, are there any CR228L's in Melbourne?

*Moggil Road in Taringa on the pedestrian overpass, while the busways get more buses per day, everybus going from Indro to the City goes via this point.

Really? I didn't know that there's a busway at Taringa! Wow, I should catch 444 one day and check it out

Vemon3D wrote:Really? I didn't know that there's a busway at Taringa! Wow, I should catch 444 one day and check it out

there isn't one . I said that moggil road is the busiest non-busway.

*Moggil Road in Taringa on the pedestrian overpass, while the busways get more buses per day, everybus going from Indro to the City goes via this point.

Non-busway?

Hmm, I checked out Northern Busways construction site at Kedron / Lutwyche area, and it looks bit ... ugly. I think Airportlink will be useless. >< at $4.20 toll for Clem7

Noof, did you notice that ... maybe 10 years ago, Brisbane houses and everything was soooo cheap and very liveable city to live in. But now, it's exaggerated and gone worst and it became most expensive city to live in for Australia

But Newman did his best to improve public transport but he did his best to increase tax to get money to spend and spend and spend on some unnecessary infrastructure such as Toowong Link tunnel from Toowong to Kelvin Grove, and ... total unnecessary expensive Hale Street Link

noofnoof wrote:Thanks Blender, you mean create a curve at then push it the entire length of the bus? I guess that makes sense. yeah that can(has been) be done.

Blender, are there any CR228L's in Melbourne?

Yes to the first, but nothing to big, just slightly to give it that real curve feeling.

Im not into buses as such, and so that number means nothing to me, sorry.
I did how-ever find a site with all the buses, both private and public busaustralia

does this bus ring any bells?


if so I can send you the 3D modle and you can skin it to that if you want to be involved.

Ive got a few projects to do. (check my signature to find out)

But I guess I can work some magic on it; oh, where would I find the actual measurements? (H;W;L)
I tried google, but just got sent to that busaustralia. And no measurements, ah, I got stumped for once.

well for making the 3D model I used http://www.btbuses.info/?Submit=fleetsp ... rching=yes, and the body type is the same everywhere. but how is this relevant?

sorry about the website, but you can't BBcode it sadly.

BlenderUser wrote:Ive got a few projects to do. (check my signature to find out)

But I guess I can work some magic on it; oh, where would I find the actual measurements? (H;W;L)
I tried google, but just got sent to that busaustralia. And no measurements, ah, I got stumped for once.

Break into your local bus depot at night. With a tape measure.

There's a bus depot a few k up the road from me... but there's also a police station right next door, so that's my excuse

Or, next time you're walking past a bus at a bus stop (as I do a lot at Central and my local train station), just count how many paces long the bus is. If you knew how long your stride was...
You could also guess at the width... 5m maybe? I'm never good at guessing distances without a reference.

That's a wide bus! this one is 2.48m according to my favourite website.

Blender mucked with my model: I like what he's done to the air con, but at the back I disagree: