Page 1 of 1
Advice on signals
Posted: 02 Jan 2015 20:38
by ahtom133
there are 2 kinds signals one is one way and a block how to use this two signals ??? need help ASAP got a lot of trains and waste a lot of time < sorry for my english. is there any new signals ?
Re: Advice on signals
Posted: 05 Jan 2015 20:19
by Zakos
The one-way signals are for directing traffic in a specific direction. By directing trains as shown below, you can have a much more efficient rail service.
Here I have four trains running on this one line making much more money than just one.
- Screenshot1.png (186.39 KiB) Viewed 11719 times
Notice that the trains are traveling in both directions like a highway.
- Screenshot2.png (155.78 KiB) Viewed 11719 times
Two-way signals can direct traffic in two directions, but they're usually best for complex stations like this:
- Screenshot3.png (277.84 KiB) Viewed 11719 times
______________________
Normally I would give you a link to the signals guide on AMI Trains, but it is currently unavailable.
Re: Advice on signals
Posted: 06 Jan 2015 16:08
by PhiliThunder
With one way signals you can also have more than two trains
Re: Advice on signals
Posted: 14 Jan 2015 04:16
by ahtom133
Well sometime i use both signals. And i have not just use
1 or
5 train running < the rail are very long it station are very big some like 3 to 5 as big as i can make by use the signals is waste a lot of time and i have to make many crossover points < there is 4 track 2 by 2 in and out here i have to make big crossover and put so many
signals and this why all my 10 to 15 trains are be stop and wait there. what to do ?
Re: Advice on signals
Posted: 17 Jan 2015 04:41
by Greyfox
@ahtom133: Are you sure you don't have to many trains on one route? Can you post some screenshots?