I use JGR'S 0.22.0 , Load up your favourite house set grf,load up scenario editor , choose Landscape - in the far right corner is a small house choose ,this allows the placing of buildings .Haldir wrote:Hello, do someone know if this patch is included in a patchpack? I play the JGR-32 pack. In this the patch is not included.
Thanks for help and forgive me my bad english.
[patch]Picking and placing single houses
Moderator: OpenTTD Developers
- piratescooby
- Route Supervisor
- Posts: 449
- Joined: 21 Nov 2014 12:39
- Location: The Granite City.
Re: [patch]Picking and placing single houses
- Attachments
-
- screenshot.png
- (582.79 KiB) Not downloaded yet
Re: [patch]Picking and placing single houses
Thank you, piratescooby. I think, I misunderstand how to use. I think, I can use it while playing a game, not only in the szenario editor.
Re: [patch]Picking and placing single houses
There seems to be a bug.
In the image below we see a cottage as Zone 5 and an office tower as Zone 1. The cottage properly builds in the outer most zone and the office tower properly builds in the inner most zone.
The bug is with the zone numbers.
I noticed this while working in JGR Patch Pack v27.1
In the image below we see a cottage as Zone 5 and an office tower as Zone 1. The cottage properly builds in the outer most zone and the office tower properly builds in the inner most zone.
The bug is with the zone numbers.
NewGrf Specs - TownZones wrote:Town zones are concentric rings around the centre of each town. A town can have up to five town zones where zone 0 is the outer most zone and the zone with the highest number the inner most.
Where you describe Town Zones as 1 2 3 4 5, shouldn't that be 4 3 2 1 0?VariationalAction2/Houses wrote:Town zone where the building is situated. The value is between 0 and 4, where 0 is the outermost zone of the town. Smaller towns have fewer zones. Roads are plain in zone 0 and 1, paved in zone 2, have trees in zone 3 and streetlights in zone 4
I noticed this while working in JGR Patch Pack v27.1
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
Re: [patch]Picking and placing single houses
towns have two zone configurations
- small towns: (inner) 2 1 0 (outer)
- large towns: (inner) 4 3 1 0 (outer)
Re: [patch]Picking and placing single houses
Hi,
I have a problem with this patch.
viewtopic.php?f=31&t=85409&p=1222493#p1222493
Help me please!!
I have a problem with this patch.
viewtopic.php?f=31&t=85409&p=1222493#p1222493
Help me please!!
Re: [patch]Picking and placing single houses
A little test might help us to help you figure this out.cestkris wrote: ↑08 Sep 2019 14:28 Hi,
I have a problem with this patch.
viewtopic.php?f=31&t=85409&p=1222493#p1222493
Help me please!!
1. Remove one of the sets that works.
2. Does one of the crossed out sets become available?
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
Re: [patch]Picking and placing single houses
Nothing changes
Re: [patch]Picking and placing single houses
Can you post a screenshot showing the change(s) you made?
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
-
- Engineer
- Posts: 28
- Joined: 13 Nov 2019 13:26
Re: [patch]Picking and placing single houses
how to install this patch?
Re: [patch]Picking and placing single houses
No need to install if you are playing JGR Patch Pack where it is accessible in the scenario editor.
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
-
- Engineer
- Posts: 48
- Joined: 03 Sep 2018 20:24
Re: [patch]Picking and placing single houses
Hi! Is there any way to "break" the rules and put any house on any place?
95% of the times i receive the message "Cant build houses there...the building is not allowed"
Im using it on JGRP.
95% of the times i receive the message "Cant build houses there...the building is not allowed"
Im using it on JGRP.
Re: [patch]Picking and placing single houses
This can be a bit of a problem.andres1555 wrote: ↑26 Apr 2020 19:59 Hi! Is there any way to "break" the rules and put any house on any place?
95% of the times i receive the message "Cant build houses there...the building is not allowed"
Im using it on JGRP.
The House selection tool shows available zones as 1,2,3,4 and 5 where 5 is the outermost zone.
The NewGRF specifications for Game Mechanics - Town Zones says something quite different:
This also appears in varAction2/Houses Property 42:A town can have up to five town zones where zone 0 is the outer most zone ...
and in Action0/houses property 13 Building availability mask (13):The value is between 0 and 4, where 0 is the outermost zone of the town ...
Code: Select all
Bit Value Meaning
0..4 1,2,4,8,10 which town zone(s) the building can be built in
wallyweb on tt-forums: Screenshots - Wallyweb World - Projects & Releases
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
wallyweb on Simuscape: Projects - Releases
Other Stuff: TTDPatch 2.6 "Nightly" download - cirdan's OpenTTD branch (New Map Features)
Screenshot Of The Month Contest Winner: August 2015 - Tied May 2016 - January 2018 - December 2018 - May 2019
Re: [patch]Picking and placing single houses
Hi,
I often use this patch to build my cities. A version exists for Openttd 10.3 ?
Thansk
I often use this patch to build my cities. A version exists for Openttd 10.3 ?
Thansk
Who is online
Users browsing this forum: No registered users and 10 guests