I also see that you have the Fix TTD grf Bugs patch loaded. If you are running Open TTD w/ the OpenGFX graphics (replacing the original TTD graphics) , then you definitely don't need this, and it may be the source of your problems.
As for the station, perhaps your not using PBS correctly? The screenshot shows a pretty simple way to make that layout (I drive on the left sorry). Notice the exit lanes and the distance before the first signal is encountered, this should be the length of you LONGEST vehicle.
hmm, i shall try the exitchaning thingy.
and could you please specify what signals you used? and if all 4 stations are able to get trains from both sides?
There are only two types of signal used: path signal and one-way path signal. Check the wiki for more info on path based signals. Notice how more than one train can enter the same bit of track at the same time (The cross over bit each side of the station)
noenie wrote:I shall remove the Fix GRF. and i know about refitting, but those wagons dont match the cargo they load..
id like a bit more realsm in there..
The old wagons new cargos grf just makes the default wagons refittable. It doesn't add any new graphics.
If you want more realistic graphics, use a proper new train grf. Or make your own.
kirky_D wrote:Heres a save file which shows you whats going on.
There are only two types of signal used: path signal and one-way path signal. Check the wiki for more info on path based signals. Notice how more than one train can enter the same bit of track at the same time (The cross over bit each side of the station)
Dude, i love you, got it working!
just one more question, is it possible to use a one-way signal for the exit?
As an aside - with that type of station it's good practice to make one platform in each direction 1-way (preferably the outermost platform) which prevents the station from jamming up and causing problems.
kirky_D wrote:Heres a save file which shows you whats going on.
There are only two types of signal used: path signal and one-way path signal. Check the wiki for more info on path based signals. Notice how more than one train can enter the same bit of track at the same time (The cross over bit each side of the station)
Dude, i love you, got it working!
just one more question, is it possible to use a one-way signal for the exit?
lol, no worries. You can have them all one way if you want doesn't make a difference.