Page 7 of 12

Re: North American Passenger Railroads Set dev. thread

Posted: 29 Jun 2018 12:45
by acs121
trainman1432 wrote:is everything going to be 2x zoom?

(cause if so we need to get to work on opengfx 2x zoom)
Yet it's 1x zoom which looks better with most other sets.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 09:58
by Tony Pixel
At this moment I can't make fully working push-pull locos. I think There will be two copies of locomotive, one of them You will use with normal cars, second - with cab control cars.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 11:59
by Tony Pixel
There is a test version. At this moment push-pull=Comet II Cab+P32AC-DM. As you will see, P32AC-DM doesn't change spriteset to Comet II, but Comet II changes spriteset to P32AC-DM.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 13:52
by Tony Pixel
Sorry for many messages, but I make it! There are some new "liveries", when You want use the loco X with control cab Y in push-pull operation, You must change the livery of loco X to "(Default Scheme, Push-Pull with Y)", if, of course, X supports Y and Y supports X.
And UPDATE! Added:
- (as you know) Push-pull service! P32AC-DM+Comet II/III and MPI MP40PH-3C+Bombardier Bilevel.
In next updates I will add (recode) more push-pull cars.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 14:04
by acs121
Tony Pixel wrote:Sorry for many messages, but I make it! There are some new "liveries", when You want use the loco X with control cab Y in push-pull operation, You must change the livery of loco X to "(Default Scheme, Push-Pull with Y)", if, of course, X supports Y and Y supports X.
And UPDATE! Added:
- (as you know) Push-pull service! P32AC-DM+Comet II/III and MPI MP40PH-3C+Bombardier Bilevel.
In next updates I will add (recode) more push-pull cars.
Excellent for the P32 AC-DM. Is it usable with railtypes 3RDR and 3RDC ? Didn't test it yet.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 14:11
by Tony Pixel
Of course, P32AC-DM is diesel-electric, so it can run on non-electrificated rails, and when it run under catenary it will not emit smoke :D . (and I updated it on BaNaNaS).

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 14:45
by acs121
Tony Pixel wrote:Of course, P32AC-DM is diesel-electric, so it can run on non-electrificated rails, and when it run under catenary it will not emit smoke :D . (and I updated it on BaNaNaS).
No, i meant by that "Do they only use the MTRO railtype from the Metro Track Set ?".

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 16:52
by Tony Pixel
I don't understand You. P32AC-DM can go on usual rails, but then it emit smoke, on other rails it hasn't it.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 17:43
by acs121
Okay, i understand now.

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 18:23
by acs121
Do you have the .lng files so that i can make translations ?

Re: North American Passenger Railroads Set dev. thread

Posted: 01 Jul 2018 18:33
by Tony Pixel
Oui!

Re: North American Passenger Railroads Set dev. thread

Posted: 06 Jul 2018 09:11
by Tony Pixel
Today coded BN livery E9 and RDC. Will code SEPT Silverliner II.

Re: North American Passenger Railroads Set dev. thread

Posted: 07 Jul 2018 14:58
by Tony Pixel
NJT ALP-46 is ready :D .

Re: North American Passenger Railroads Set dev. thread

Posted: 08 Jul 2018 07:35
by Tony Pixel
NJT ALP-46 coded and aviable for push-pull operation with Comet II/III :D

Re: North American Passenger Railroads Set dev. thread

Posted: 08 Jul 2018 11:14
by Tony Pixel
Comet IV also coded and aviable for PP with P32AC-DM and ALP-46, but it isn't (or a bit :? ) compatible with previsious saves, use it on your own risk!

Re: North American Passenger Railroads Set dev. thread

Posted: 10 Jul 2018 15:02
by Tony Pixel
LvL-up, new vs. old M2 "Cosmopolitan", new will be in next version. Also will be added MR-90.
(acs121: YaY, finally :D )

Re: North American Passenger Railroads Set dev. thread

Posted: 10 Jul 2018 17:03
by acs121
How great. I don't know if i can say more "thank you".

Also, i could draw for most electrics if you like it, i already have M7, M8 and C3 coach sprites if you want them. I can also draw ACMUs.

Re: North American Passenger Railroads Set dev. thread

Posted: 11 Jul 2018 10:39
by Tony Pixel
Update. As I said, added MN M2 and MR-90, also aviable NJT ALP-46 and new Comet IV cab and car.

Re: North American Passenger Railroads Set dev. thread

Posted: 11 Jul 2018 19:38
by Lex-Pelham
Hey Tony,

Let me just say that you are doing an excellent job, please keep up the good work. Your set works well alongside the American Transition (US) Train Set and it has help expand my train fleet.

There are just several small minor points that I would like to bring to your attention via PM if possible.

Once again, good job :) .

Re: North American Passenger Railroads Set dev. thread

Posted: 11 Jul 2018 19:47
by acs121
Yet i'll say... could you finish first Metro-North and LIRR ? I'm in need of commuters in my current game, and yet the M2s are very old and i have nothing to replace them.