[32bpp/EZ] YETI Extended Towns and Industries

Discuss, get help with, or post new graphics for TTDPatch and OpenTTD, using the NewGRF system, here. Graphics for plain TTD also acceptable here.

Moderator: Graphics Moderators

User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Since machinery chain is now done, it is time to enhance and finish the other chains. From food chain, the Grain Farm definitely needed some grain-y plants ... so here they are. Perhaps something like less sharp edges of the field would be great, and some adjustments to the ground - and perhaps also to the grian itself .... but roughly acceptable for now I would say :)
Attachments
2-B-x1.png
2-B-x1.png (89.67 KiB) Viewed 7739 times
2-B-x4.png
(1.33 MiB) Downloaded 15 times
ImageImageImage
User avatar
planetmaker
OpenTTD Developer
OpenTTD Developer
Posts: 9432
Joined: 07 Nov 2007 22:44
Location: Sol d

Re: YETI Extended Towns and Industries

Post by planetmaker »

Very lovely. Not sure the field needs another shape. But given the size you surely are growing a mix-breed of maize and bamboo :)

I'd rather look at the barn door towards the road. It seems to lack a bit contour, but imho should stand out slightly. Maybe the road itself could be a bit less straight - it's just a farm road after all. The barrels stacked between the buildings are of giant size. One would fill my entire kitchen.
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Regarding the crops, I was mainly afraid that it made the building look terribly small ... I have already updated it in the devzone previews, just not here :) so I attach it now ... the barrels are just for some random looks, I am not even sure if those stay ... barrels dont make much sense with grain anyway. They will probably turn into something like a silo .. bigger than current barrel but a silo already :P
The barn door and ground are both surely not final (:

What applies for most of my models is that visual appearance is superior to scale precision. This is to be seen especially in textures ... for example "real world size mapping" would make all textures tiny tiny small. Point being, I was afraid that the field would lose a lot of detail if I made it smaller/shallower. Luckily it seems to be just fine with half height (:

Thank you for your input!
Attachments
2-B-x1.png
2-B-x1.png (89.55 KiB) Viewed 7718 times
2-B-x4.png
(1.34 MiB) Downloaded 11 times
ImageImageImage
Alberth
OpenTTD Developer
OpenTTD Developer
Posts: 4763
Joined: 09 Sep 2007 05:03
Location: home

Re: YETI Extended Towns and Industries

Post by Alberth »

To postpone death a bit longer:


I love the high fields, and the wear on the buildings. It's nice to have high crops.

You could extend the muddy underground under the plants to a more rectangular shape, assuming YETI machines make more basic straight lines than the nice curves of the plants. I'd keep the ground shape of the plants as it is, you often see such gaps at the edges in fields.

The space around the building looks a bit clean. Farms have lots of random stuff lying around, in my experience.

A little stone path around the house and to the shed could be added.
Some random old rusty stuff (old tires, or broken machine) could be added.
Some chairs to sit outside (unless YETIs always work of course),
A little wooden frame holding the battery of the farm.

Edit: Oh you made the fields lower, the house comes out better now, but also looks more empty around it.
A silo doesn't really look right to me. Farmers don't store their grain imho, they sell it. Instead they need fertilizer etc, barrels would make sense imho.
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Okayz! :D I especially appreciate the ideas of details, because those are for me often hard to think of, but they make it so much more alive/detailed.

Thanks
ImageImageImage
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Somewhat final state of building material factory, which leaves me with 3 industries to go! (:

The clay bricks and stone bricks are a bit overshadowed by the wood which there is a lot of, but for now it works.
Attachments
1-X-x1.png
1-X-x1.png (94.78 KiB) Viewed 7550 times
1-X-x4.png
(1.43 MiB) Downloaded 10 times
ImageImageImage
Glynbd
Engineer
Engineer
Posts: 12
Joined: 05 Dec 2013 21:01
Location: UK

Re: YETI Extended Towns and Industries

Post by Glynbd »

Great work, looks really nice.

Will this be incuded in the in game graphics download options one day?

Thank you.
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Glynbd wrote:Great work, looks really nice.

Will this be incuded in the in game graphics download options one day?

Thank you.
Thanks, yes it will be on BaNaNaS as soon as it is done, I think version 0.0.1 somewhere in first half of July 2014 is highly possible.
ImageImageImage
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Does this look enough like a clay pit to you?
Attachments
1-B-x4.png
(1.3 MiB) Downloaded 9 times
1-B-x1.png
1-B-x1.png (89.32 KiB) Viewed 7438 times
ImageImageImage
Alberth
OpenTTD Developer
OpenTTD Developer
Posts: 4763
Joined: 09 Sep 2007 05:03
Location: home

Re: YETI Extended Towns and Industries

Post by Alberth »

Spiffy!

I hope the spiral is actually a conveyor belt, or it wouldn't work. An alternative would be a bucket chain, with a big wheel at the top for tipping the bucket over.

The platform looks way too clean to be used near sticky clay. I'd expect tracks of caterpillars or whatever heavy machinery yetis use.

Some railing could also be useful or yetis may fall down into the pit.

Don't they need to go down into the pit at times? You could go partly down using the pillar at the right, but that's only halfway. Maybe boards to walk on at the bottom?

A little path at the left or right from the platform to the clay could be useful.
Finally, clay is very good for green grass and trees, the edges could be nicely green, I think.
lukasz1985
Route Supervisor
Route Supervisor
Posts: 429
Joined: 27 Mar 2013 08:58
Location: Strumien
Contact:

Re: YETI Extended Towns and Industries

Post by lukasz1985 »

I like it, to me it certainly does look like a clay pit. :)
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

While I might have not yet finished the graphics for the last two remaining industries (Animal Farm and Worker Yard)...

With greater help from other people on IRC, I managed to define my first industry!
I even created a template for sprites which should work for all other industries.

Functionally it is not so great as of yet, but it is a great start. :)
Attachments
YETI000.png
YETI000.png (207.96 KiB) Viewed 7129 times
ImageImageImage
User avatar
Sylf
President
President
Posts: 957
Joined: 23 Nov 2010 21:25
Location: ::1

Re: YETI Extended Towns and Industries

Post by Sylf »

:shock: That looks pretty amazing in place!
Supercheese
Tycoon
Tycoon
Posts: 1660
Joined: 16 Dec 2007 22:24
Location: Idaho, USA

Re: YETI Extended Towns and Industries

Post by Supercheese »

Sylf wrote::shock: That looks pretty amazing in place!
Agreed, can't wait to test the industries. :)


Are we there yeti?
Eyecandy Road Vehicles | Fake Subways | Supercheese's NewObjects

"Fashions and cultures change, but steam trains shall always be majestic."
-Professor Hershel Layton
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

Thanks :)

We are not there yeti, but currently I am going to try to get a playable version and the graphics of the last two industries will be something rather simple for now.

V
ImageImageImage
User avatar
YNM
Tycoon
Tycoon
Posts: 3570
Joined: 22 Mar 2012 11:10
Location: West Java

Re: YETI Extended Towns and Industries

Post by YNM »

I like the idea, the graphics looks good (a mix of oldish and futuristic buildings, huh). Although it feels like Banished (you get people, then they work, work produce food and building materials, additionally they need tools which requires work too) but I belive it's better (straighter yet slightly more complex) than the standard industries. Not as confusing as other industries set too.

Anyway, would this means that NUTS will be 32bpp one day ? Or it won't ? (or am I missing it ?)
YNM = yoursNotMine - Don't get it ?
「ヨーッスノットマイン」もと申します。
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

What will happen to NUTS is deep in the stars yet, but ...

My current priority list:
1. creating playable YETI version 0.0.1
2. creating stable YETI version without major bugs
3. updating NUTS with special wagon sprites for Workers
4. creating newGRFs to make YETI fit better into OpenTTD
- 4a. landscape newGRF
- 4b. infrastructure newGRF to go with landscape
- 4c. tree newGRF to go with landscape
5. improving
- 5a. animated characters - Workers for YETI
- 5b. enhancing NUTS by extra features - unknown which but 32bpp/EZ is possible :)

Speed of progress undefined due to amount of effort. :P

Most likely option for NUTS: It gets a parameter so you can choose between 8bpp and 32bpp/ez sprites. Simply because I do not want to waste previously drawn pixel art, AND because I think no matter what I do, rendered models will never fit drawn pictures and vice versa. Therefore I think it makes good sense to let the player choose which one to use, according to his liking/dependence on other used newGRFs or base set.
ImageImageImage
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

BREAKING NEWS:

Due to recent progress with coding mainly thanks to help from frosch and Alberth, you can expect version 0.0.0 on Bananas this Sunday (tomorrow) :)
Attachments
YETI_0000.png
(1.19 MiB) Downloaded 6 times
ImageImageImage
User avatar
V453000 :)
President
President
Posts: 946
Joined: 01 Feb 2011 11:22
Location: Beer

Re: YETI Extended Towns and Industries

Post by V453000 :) »

blog_01_600.png
blog_01_600.png (410.19 KiB) Viewed 6738 times
Now available on BaNaNaS

http://blog.openttdcoop.org/2014/07/13/ ... e-arrived/
ImageImageImage
Supercheese
Tycoon
Tycoon
Posts: 1660
Joined: 16 Dec 2007 22:24
Location: Idaho, USA

Re: YETI Extended Towns and Industries

Post by Supercheese »

YETI dudes rejoice!
Eyecandy Road Vehicles | Fake Subways | Supercheese's NewObjects

"Fashions and cultures change, but steam trains shall always be majestic."
-Professor Hershel Layton
Post Reply

Return to “Graphics Development”

Who is online

Users browsing this forum: Bing [Bot], Semrush [Bot] and 20 guests