Transport Tycoon Forums

Quast65 wrote:Please correct me if this is the wrong way to do it.

No, that sounds quite okay. Maybe I'm just surprised you got a positive answer for the Canadian Stations as I still remember much drama about the various Canadian GRFs

-- Michael Lutz

Because of issues like that I wanted to be as clear as possible what specific sprites we would like to use and how they will be used in the new GRF (and under what license), when asking for permissions.

And also friendly asking before acting can get you a long way

I'd like to request adding YARRS roads to the GRF please. Buttercup is still around occasionally and coded stuff for the original OGFX, so I'm not expecting major problems in licensing terms.

Edit: And while I think about it, there's also Urban Renewal (though I can't get it to work at the moment!) and the Hungarian Road Set. With these, I think you'll have covered every road set ever used, excluding BornAcorn's dreadful set that he practically disowned and the European Road Set from Hyronymous that was superseded by the Combined Road Set.

Good suggestion, will look into that!

Oh dear, I thought you might manage a quick reply. Just to make sure you see them, as edits don't change the thread to unread, see my edits to the previous post!

You could also put your subway entrance on top of it Or, throw in an IRS asphalt tile.

kamnet wrote:You could also put your subway entrance on top of it Or, throw in an IRS asphalt tile.

Like the idea of the subway entrance . I also thought about the ISR tiles, but thought I would wait to suggest that to Quast as he has a lot to make as is now.

Not bad ideas at all, but I have some questions about that.

Is it possible to have multiple tunnels inside a railtype, so a different tunnel at each track?

So for example in stead of 3 tracks we have now, you could get these 6 within the railtype:

- unelectrified, with roadtunnel
- electrified, with roadtunnel
- metro, with roadtunnel
- unelectrified, with ISR tile tunnel
- electrified, with ISR tile tunnel
- metro, with subway entrance tile tunnel

This is mainly because changing all the tunnels within the railtype to one with a subwayentrance would look very strange at some places, some of my metrolines have their depots outside of the city and having a subwayentrance in the middle of nowhere just looks strange It is offcourse not difficult to draw, so I could still do that after I have finished implimenting the roads, but maybe Beul could play around with the coding in the mean time to see if that could work.

But talking about ISR gave me an idea... We now have 3 tracks within the railtype, where we had to place some graphics of rusty rails to avoid some problems within the game. Could 2 of those (the electrified and un-electrified) be changed to rails with a full ISR-tile as groundtile? Because I always disliked the look of grass inside my industrial areas The metrotrack could still be kept as rusty rail, because that rail still shouldn't be used.
What are your thoughts about this suggestion?

Every railtype can have one type of tunnel entrance attached to it. One could do some variation depending on terrain type and build date, but you can't make "different flavours" user-selectable with that. So essentially for every different tunnel entrance you need to use a separate railtype. Your proposed six variants will therefore consume 6 railtypes, which won't make the set particulcarly compatible with several other track sets, given the 16 railtype limit.

I had a different idea though last night: what if the tunnel entrance is converted to a full grass tile, and the station-like entrance made part of an actual station tile? That way the same tunnel can be used anywhere, while you can have multiple different station tiles matching different station sets.

But in essence this set proves that we desperately need this feature called "enhanced tunnels". Then you could simply build a real road on top of the tunnel entrance...


As for your last question: yes, one could display a tile instead of track.

I was afraid that having multiple tunnels within a railtype was not possible So Let's stick to the 3 tracks we have now.

As for your last question: yes, one could display a tile instead of track

That is not what I meant I mean still seeing tracks (that can be used by trains), but with full ISR tile as "ballast" around/under the track.

Regarding the tunnelentrance as stationtile:

I guess you mean that the entrance you would see will then be an overlapping tile. That is not a bad idea, but it has a disadvantage and that is that you would have to place a stationtile next to the entrance. This has a couple of problems:
- In the trainorders that stationtile should be set to non-stop (when it is not next to an actual station), not all players will have their setups as standard "all orders are non-stop"
- Also a name will be shown for that station.
- What should be drawn on the tile that is the actual stationtile to match it to the station next to it? Empty platforms, roofs, benches, grass, etc etc...
- Furthermore, most tunnels have slopes next to them and stations can't be placed on slopes.... So you would need an extra tile before you can have a slope.
- Also the overlapping tile will probably glitch when trains move through it, which doesn't look good.

And there are even more probems with the placing of the exit tunnel station tile, that I won't go into now.

Sorry that I shot down this idea Because I really like it that people are exploring the idea of overlapping tiles!! But I think it has too many disadvantages that can be solved just by using a railtype (what we are doing now).

Quast65 wrote:That is not what I meant I mean still seeing tracks (that can be used by trains), but with full ISR tile as "ballast" around/under the track.

Sorry, misunderstood. But it's still possible. Essentially you just make the ballast as wide as the complete tile. That's perfectly possible, won't even glitch

Quast65 wrote:I guess you mean that the entrance you would see will then be an overlapping tile...

Not overlapping per se. Essentially replace your road on top of the tunnel with a full grass tile. And then move your road to a station tile.

With the station essentially continuing into the tunnel, you have to build a station in front of the tunnel anyways, so that doesn't make much of a difference. And in fact, the tunnel would look much better when not built together with a station. I made a small example: There's still the issue of connecting the fake road on top of the station tile to the real road though, that would be impossible with this.

instead of adding a tunnel, why not use a similar approach as teh Modular locomotive sheds & ISR docktiles: create an overlapping tile that covers teh entrance will do

unless someone can get CBH to work soon (and CTE as its linked)

CBH = CustomBridgeHeads
CTE = CustomTunnelEntrances

@ZxBiohazardZx: That would still create the problems I described earlier, at least it would use an extra tile.

@FooBar: Please elaborate a bit more, I don't get it. So you would place a stationtile on top of a tunnelentrance? Is that possible?

Quast65 wrote:@FooBar: Please elaborate a bit more, I don't get it. So you would place a stationtile on top of a tunnelentrance? Is that possible?

No, in front of it.
If you put the station tile I indicated in front of the tunnel entrance I indicated, it will look almost exactly the same as you have now.

Right, so that would still mean that it overlaps the tunnelentrance. Like this:

EDIT1, wait I get it, the actual tunnel is one tile further away, right? Like this: Still, there would be a problem with the graphics of the tile in front of the tunnelentrance, what should be placed on that? As there are so many options, like I stated before, that would mean drawing loads and loads of different options that are in the sets and requiring permissions for those tiles. As now I only need 4 empty platform sprites from each set. EDIT2: Ignore these remarks if EDIT1 is correct

Quast65 wrote:EDIT1, wait I get it, the actual tunnel is one tile further away, right? Like this:

Yes, that's it! I didn't know how to make it more clear, but luckily you figured it out

Quast65 wrote:EDIT2: Ignore these remarks if EDIT1 is correct

Will do

I did allready know that it is not possible to have multiple tunnel entrances in one track type. What I was planning on doing though is the following: keep the three basic rail types (non-el, el, and 3rd rail) but make the type of tunnel adjustable by a parameter. That way the player could select the platform that fit's his favorite sation set/track type.

@foobar I like your idea of making the tunnel all grass and providing the entrance as station tile. I don't know how much work it would be in the drawing department, but codewise I do see a problem: I am a complete coding newb, and there is no documentation on station tiles in NML .

Should not be to difficult though I guess.... It would also cover the problem of the railtype slots. Since you do not see the actual tunnel I could just make it compatible to all rail types (like the univ track in NUTS)

Edit: @Quast65: I do like the idea of tracks on "ISR ballast" If you are not allready working on it I would like have a go at drawing it.

@ FooBar: That is a great idea!!! That way you could have custom entrances and they are railtype independent, so they could match all sorts of tracks that are being developed!!

Only problem I have with it for implimenting it into this GRF we are developing is that it will place a grasstile inside a city (where the tunnelentrance is under) and I wanted to get rid of that. So I think we should continue with the development of this GRF as we are doing now.

But FooBar, I think you should open a new thread with this idea! This could be revolutionary!

EDIT @ Beul: I have not started on the ISR tracks, busy still with tunnels, if you would like to pick that up, please do.

Quast65 wrote:@ FooBar: That is a great idea!!! That way you could have custom entrances and they are railtype independent, so they could match all sorts of tracks that are being developed!!

Only problem I have with it for implimenting it into this GRF we are developing is that it will place a grasstile inside a city..

not necessarily! we could make 2 rail typels (would still be less than 3) One with a grass tile, and one with some building on top. or a park, or a fountain, or anything that you could imagine

That is a good idea!

For me graphicswise it would mean I don't have to draw the rails anymore as the entrances will be stationtiles, though the layout of the sprites will have to be a bit different as stationtiles have a slightly different way of being built up than a tunnel. But that is just some minor copy/pasting work, that I don't mind doing.

However I think we would need 4 railtypes

- Tunnel with urban entrance and exit
- Tunnel with rural entrance and exit
- Tunnel with urban entrance and rural exit
- Tunnel with rural entrance and urban exit

EDIT @Beul: I think we should focus our work first on drawing and coding these tunnel railtypes. The stationtiles can be added later or even be added as a separate GRF (because I am not sure that stationtiles can be coded in NML yet). What are your ideas about the path we should follow?