Problems with new ships, they have old graphics.
Moderator: TTDPatch Moderators
- Mati
- Route Supervisor
- Posts: 503
- Joined: 31 Oct 2002 18:35
- Location: Buenos Aires, Argentina
- Contact:
Problems with new ships, they have old graphics.
I've reinstalled my TTD and i have a problem...
As you may see in the screen below, I've done all what was needed to put the newshipsw , the ships are there, but the graphics are not.
If anyone can help me, you are welcome...
BTW, when I load a game that have these ships, TTD crashes. But not this saved-game.
As you may see in the screen below, I've done all what was needed to put the newshipsw , the ships are there, but the graphics are not.
If anyone can help me, you are welcome...
BTW, when I load a game that have these ships, TTD crashes. But not this saved-game.
- Attachments
-
- NewshipsOldGraphics.JPG (103.34 KiB) Viewed 5458 times
Regards from Argentina,
Mati Vivaldi
Mati Vivaldi
- HOVORKA
- Transport Coordinator
- Posts: 291
- Joined: 07 Nov 2002 13:10
- Location: Czech Republic, Prague
- Contact:
I have the same problem. Do you try Cht: ReloadEngines .
http://www.tt-league.net
New Transport tycoon instalation pack is on http://www.tt-league.net/store/prog/install.exe (12 MB - multilanguage)
Are you sure you downloaded the Windows version of the new ships? Because if not, that would do it.
Make sure:
a) your ttdpatchw.grf (note the "w") is about 400 KB
b) you have "newships on" in the cfg file
If your ttdpatchw.grf is not about 400 KB large, you downloaded the wrong file or didn't install it properly. Try again.
Make sure:
a) your ttdpatchw.grf (note the "w") is about 400 KB
b) you have "newships on" in the cfg file
If your ttdpatchw.grf is not about 400 KB large, you downloaded the wrong file or didn't install it properly. Try again.
- Mati
- Route Supervisor
- Posts: 503
- Joined: 31 Oct 2002 18:35
- Location: Buenos Aires, Argentina
- Contact:
Maybe this explains...
I'm still unable to see the new graphics...and when trying to load a game with the ships, ttd crashes
I will try for 3rd time to reintall my ttd...
I misssssss it a lot though...
BTW, check the brand new patagonia site!
THANK YOU ALL FOR YOU HELP GUYS!
I'm still unable to see the new graphics...and when trying to load a game with the ships, ttd crashes
I will try for 3rd time to reintall my ttd...
I misssssss it a lot though...
BTW, check the brand new patagonia site!
THANK YOU ALL FOR YOU HELP GUYS!
- Attachments
-
- asdf.JPG (22.3 KiB) Viewed 5436 times
Regards from Argentina,
Mati Vivaldi
Mati Vivaldi
- Mati
- Route Supervisor
- Posts: 503
- Joined: 31 Oct 2002 18:35
- Location: Buenos Aires, Argentina
- Contact:
BTW, check http://www.tt-forums.net/viewtopic.php?t=1826 if you want to see what hapenes when i try to load a game.
It happens the same thing to another person.
It happens the same thing to another person.
Regards from Argentina,
Mati Vivaldi
Mati Vivaldi
- spaceman-spiff
- Retired Moderator
- Posts: 20634
- Joined: 28 Jul 2002 07:08
- Location: Belgium
- Contact:
- Mati
- Route Supervisor
- Posts: 503
- Joined: 31 Oct 2002 18:35
- Location: Buenos Aires, Argentina
- Contact:
IT WORKS ! IT WORKS ! IT WORKS ! IT WORKS ! IT WORKS !
i've changed the ttdpatch.cfg of the new installation to the old one that i had kept...! Here is a list of what was in the old and the new one (new one didn't work.) This might help Josef or the Configurator guy to prevent this to happen.
OLD (worked) NEW (not worked)
[ttdxconfig]
roadvehs=240 roadvehs=off
ships=240 ships=off
trains=240 trains=off
planes=240 planes=off
rvqueueing=1 rvqueueing=1
newships=1 newships=1
mammothtrains=1 mammothtrains=1
After comparing them I noticed that the ships,trains,etc where put 'off' but in the program they where as '240'. This is a 'bug' in the TTDPatchConfig.
THANK YOU ALL FOR YOUR HELP!
i've changed the ttdpatch.cfg of the new installation to the old one that i had kept...! Here is a list of what was in the old and the new one (new one didn't work.) This might help Josef or the Configurator guy to prevent this to happen.
OLD (worked) NEW (not worked)
[ttdxconfig]
roadvehs=240 roadvehs=off
ships=240 ships=off
trains=240 trains=off
planes=240 planes=off
rvqueueing=1 rvqueueing=1
newships=1 newships=1
mammothtrains=1 mammothtrains=1
After comparing them I noticed that the ships,trains,etc where put 'off' but in the program they where as '240'. This is a 'bug' in the TTDPatchConfig.
THANK YOU ALL FOR YOUR HELP!
Regards from Argentina,
Mati Vivaldi
Mati Vivaldi
- Mati
- Route Supervisor
- Posts: 503
- Joined: 31 Oct 2002 18:35
- Location: Buenos Aires, Argentina
- Contact:
Well, i've changed the new .cfg 'off' values to 240. But it still doesn't work. So it must have been another thing.
(I can use now my ttd but I want to know how to solve this problem if it apears again to anyone.)
Here are the two .cfg's
New (doesn't work)
[ttdxconfig]
roadvehs=240
ships=240
trains=240
planes=240
rvqueueing=1
newships=1
mammothtrains=1
trainrefit=1
nonstop=1
mountains=off
curves=1
loadtime=0
fullloadany=1
selectgoods=1
multihead=30
enginespersist=1
presignals=1
extpresignals=1
keepsmallairport=1
moreairports=1
planecrashcontrol=16
morenews=1
noinflation=1
moveerrorpopup=1
verbose=1
debtmax=1
subsidiaries=1
aiboost=3
lowmemory=1
signcheats=1
cheatscost=1
generalfixes=1
diskmenu=1
forcerebuildovl=1
win2k=1
morevehicles=5
reducedsave=off
forceautorenew=1
autorenew=-15
servint=90
OLD (works)
[ttdxconfig]
roadvehs=240
ships=240
trains=240
planes=240
rvqueueing=1
newships=1
mammothtrains=1
trainrefit=1
nonstop=1
mountains=1
curves=1
loadtime=1
fullloadany=1
selectgoods=1
multihead=30
enginespersist=1
presignals=1
extpresignals=1
signal1waittime=off
signal2waittime=off
keepsmallairport=1
moreairports=1
planecrashcontrol=16
morenews=0
noinflation=0
moveerrorpopup=1
verbose=1
debtmax=1
subsidiaries=1
aiboost=2
(I can use now my ttd but I want to know how to solve this problem if it apears again to anyone.)
Here are the two .cfg's
New (doesn't work)
[ttdxconfig]
roadvehs=240
ships=240
trains=240
planes=240
rvqueueing=1
newships=1
mammothtrains=1
trainrefit=1
nonstop=1
mountains=off
curves=1
loadtime=0
fullloadany=1
selectgoods=1
multihead=30
enginespersist=1
presignals=1
extpresignals=1
keepsmallairport=1
moreairports=1
planecrashcontrol=16
morenews=1
noinflation=1
moveerrorpopup=1
verbose=1
debtmax=1
subsidiaries=1
aiboost=3
lowmemory=1
signcheats=1
cheatscost=1
generalfixes=1
diskmenu=1
forcerebuildovl=1
win2k=1
morevehicles=5
reducedsave=off
forceautorenew=1
autorenew=-15
servint=90
OLD (works)
[ttdxconfig]
roadvehs=240
ships=240
trains=240
planes=240
rvqueueing=1
newships=1
mammothtrains=1
trainrefit=1
nonstop=1
mountains=1
curves=1
loadtime=1
fullloadany=1
selectgoods=1
multihead=30
enginespersist=1
presignals=1
extpresignals=1
signal1waittime=off
signal2waittime=off
keepsmallairport=1
moreairports=1
planecrashcontrol=16
morenews=0
noinflation=0
moveerrorpopup=1
verbose=1
debtmax=1
subsidiaries=1
aiboost=2
Regards from Argentina,
Mati Vivaldi
Mati Vivaldi
please email me both files with a brief description... they should both work.
I do note though that your non-working one doesn't have win2k on. Did you leave that out by accident? Which others did you leave out?
Maybe you can try changing one switch after another to find out which one is the problem. I'd be very interested in finding out, because I can't guess what's wrong.
I do note though that your non-working one doesn't have win2k on. Did you leave that out by accident? Which others did you leave out?
Maybe you can try changing one switch after another to find out which one is the problem. I'd be very interested in finding out, because I can't guess what's wrong.
- spaceman-spiff
- Retired Moderator
- Posts: 20634
- Joined: 28 Jul 2002 07:08
- Location: Belgium
- Contact:
Hm, Patchman, where did you see that, i must have missed something
in his bad one i see wink2k=1 (this is on i think)
and i don't see the switch in his good one
And some advice to everyone, don't post pieces of your config file, i know you all like to post jpegs and long texts, but just attach the config file with a little comment, this is much easier
in his bad one i see wink2k=1 (this is on i think)
and i don't see the switch in his good one
And some advice to everyone, don't post pieces of your config file, i know you all like to post jpegs and long texts, but just attach the config file with a little comment, this is much easier
Well, back to work, lot's of it in the near future
Who is online
Users browsing this forum: No registered users and 5 guests