32bit Extra Zoom Graphics Works In Progress

[maquinista]

maybe it could be possible to use the northstar2 suspension and cantilever bridges,with different colors to fit with your models?
i don't know if it's hard or long to render theses sprites with other colors and assembly them but it's just an idea.

You can modify the sprites with GIMP.


I have modified a bit the bridges. Also, I have added a truss monorail bridge.

[Leanden]

Looking good maquinista! Between you and northstar, your going to complete the 32bpp all by yourselves

[maquinista]

Looking good maquinista! Between you and northstar, your going to complete the 32bpp all by yourselves

Thanks. Also, thanks to j0rdax, Varivar, Ben Robbins, Brupje, BerberJesus, Rectangle, Wacki, LordAzamath, Wotan, habell, Teemes, Soeb, Alltaken, gt1750, Slye Fox, =SLJ=DownEast, Joed, Athanasios, Thomash, aDe, SunnyBoy, Cadaver, DirtY iCE, LiquidLogic, Dmh_mac and GeekToo...


I have finished (for now) the new bridges TAR file. I have added two new monorail bridges: concrete beam and urban. The TTO stile bridge was moved to the concrete bridge. Also, this bridge has a higher speed, 40 mph, because 30 was too slow.

Remember that this TAR file is free (Creative commons BY), You can modify it as You want, if You don't like colours, or You want some noise...

[northstar2]

thanks for your compliments.as maquinista said,we musn't forget all the contributions from all the modellers.
the end of the 32bpp project is very far away but we approach each day.
Maquinista.your bridges are very nice.i like especially the tubular models.

[maquinista]

I have coded the latest northstar2 bus:

[maquinista]

I have updated the file varivars_trucks_v4.tar because some of its vehicles was moved to openttdw.grf and some times, the wood trucks didn't show 32 bpp sprites.

[ChriZZi]

Hi there,

I've been watching this thread for a while now, and I think now its time to say "Thank you guys!". You're doing really excelent work! And I love OTTD32bpp! Its really grate!

[Leanden]

That last comment was a little bit cheesey Sorry...

How do the windows on those buses change in game?

[maquinista]

Some TAR files more.

[Ammler]

I compiled a 32bpp version and checked the "big pack", awesome graphics in it.

But are you guys aware that a lot details will go lost if you use them on the "normal" zoom level, like you don't see anymore, if the signal is green or red...
(it looks like you can enjoy this graphics on the special patch zoom in level, only. )

Greets
Ammler

[maquinista]

I compiled a 32bpp version and checked the "big pack", awesome graphics in it.

But are you guys aware that a lot details will go lost if you use them on the "normal" zoom level, like you don't see anymore, if the signal is green or red...
(it looks like you can enjoy this graphics on the special patch zoom in level, only. )

Greets
Ammler

This is true, tram graphics looks bad at z1 or z2 zoom level, this could be fixed adding tweaked files for these zoom levels.

[PluueeR]

I am following this thread (and the other one) for years now and really would like to play around with the new graphics. I tried a couple of Win32 binaries (as most of the 32bpp graphics are the "extra zoom levels"-kind of graphics), but never managed to start it. Is there someone who could share a OS-X binary or Win32 binary which I can start or do I have to be more patient?

[maquinista]

I am following this thread (and the other one) for years now and really would like to play around with the new graphics. I tried a couple of Win32 binaries (as most of the 32bpp graphics are the "extra zoom levels"-kind of graphics), but never managed to start it. Is there someone who could share a OS-X binary or Win32 binary which I can start or do I have to be more patient?

Has You modified the configuration file?
http://wiki.openttd.org/32bpp_Extra_Zoo ... stallation

[PluueeR]

Damn, I just gave up when it didn't start in the first place. But now that I have created the openttd.cfg file it does start! Tnx!

[maquinista]

I have coded the latest Pietjeklap's plane. It replaces the Bakewell Luckett LB-10 and the Bakewell Luckett LB-11. If You want cargo graphics or different graphics, someone must code a GRF file.

[planetmaker]

Damn, I just gave up when it didn't start in the first place. But now that I have created the openttd.cfg file it does start! Tnx!

You're welcome. Or did you have a question?

[pietjeklap]

I have coded the latest Pietjeklap's plane. It replaces the Bakewell Luckett LB-10 and the Bakewell Luckett LB-11. If You want cargo graphics or different graphics, someone must code a GRF file.

Very nice!

What about the Guru Galaxy?

[maquinista]

I have coded the latest Cadaver's building. If He updates it, I will update the file.

NOTE:
The TAR file cadaver_houses.tar is in the next post:
http://www.tt-forums.net/viewtopic.php?p=803427#p803427

[maquinista]

This is the latest TAR files updathed.

The lumbermill file only works with the latest ECS wood file from George. I have added the snow sprites.
The planes file has 16 sprites replaced, but these sprites are the same for more planes. The other planes could have their own sprites with a new GRF file.
The Cadaver houses file has the hotel. I think that the hotel and these two models are finished and doesn't need more changes. The little house could have a different roof, but there aren't needed big changes.

[Lord Aro]

bit off topic, but whenever i run 32bpp openttd after about 15 mins or so it crashes and i get an error message saying "out of sprite memory"

what have i done wrong?!?!?!?!