Howto apply a patch/diff file

Post by **Rubidium** » 17 Mar 2009 11:47

Depending on the compile environment it means that:
- you freetype-dev is broken;
- you failed to download openttd-useful;
- you failed to properly configure your compiler to add the openttd-useful path to it's search path for includes.

snowie · Post by **snowie** » 17 Mar 2009 19:08

So would you tell me what should I do? I'm not advanced in it.

Yexo · Post by **Yexo** » 17 Mar 2009 19:10

snowie wrote:So would you tell me what should I do? I'm not advanced in it.

Rubidium wrote:Depending on the compile environment it means that:

So telling us what environment you use would be a good start.
1. What OS do you use (Windows/Linux/Mac OSX/Other)?
2. What compiler do you use (msvc/gcc (under mingw or cygwin))?

dihedral · Post by **dihedral** » 17 Mar 2009 22:21

./configure --without-freetype

snowie · Post by **snowie** » 18 Mar 2009 09:18

OS: Windows XP, compiler: Cygwin

Caelan · Post by **Caelan** » 18 Mar 2009 09:27

And another newbie to OTTD bites the dust. Perhaps its my lack of technological knowledge or the fact that I do not understand the idea of what a patch is; I only want to integrate the new passenger destinations and timetables in OTTD; its just that I do not know how, despite all advices given in this forum. Might I ask for a simpler way, can somebody help me by providing a prepared OTTD patch with the above patches in it? I know I ask for a lot but there must be loads who have already that included.

mad_railman · Post by **mad_railman** » 26 Mar 2009 22:38

towards the begining of this thread It was stated:

MeusH wrote:If you're using windows, you can download TortoiseSVN, install and do the following:

Download the source files:
Make a new folder...

where should the folder be put that has SVN? I looked and I didn't see an answer.

Yexo · Post by **Yexo** » 26 Mar 2009 22:48

mad_railman wrote:towards the begining of this thread It was stated:
MeusH wrote:If you're using windows, you can download TortoiseSVN, install and do the following:

Download the source files:
Make a new folder...
where should the folder be put that has SVN? I looked and I didn't see an answer.

At a place you can find it again.

mad_railman · Post by **mad_railman** » 27 Mar 2009 00:46

ok, just wondering so I don't screw OTTD up beyond repiar, thanks!

ok now I have another question, what if the patch finds conflicting lines in the script (I can only do a little HTML and CSS nothing else so I dont know what the problem is) the patches that im trying to install are Bilbo's Extra large map patch and his Max Hight Modification patch

belugas · Post by **belugas** » 27 Mar 2009 02:01

mad_railman wrote:what if the patch finds conflicting lines in the script (I can only do a little HTML and CSS nothing else so I dont know what the problem is) the patches that im trying to install are Bilbo's Extra large map patch and his Max Hight Modification patch

Then, unless a kind soul helps you out, you will need to find by yourself what is the right part. This is called a conflict, and a conflict can only be fixed by knowing what the code is intended to do on both patches (if combining) or on trunk.
Yes, you have to learn C/C++ for that, no magic trick possible.

dihedral · Post by **dihedral** » 27 Mar 2009 08:30

deja vu! http://www.tt-forums.net/viewtopic.php?f=33&t=41832

mad_railman · Post by **mad_railman** » 27 Mar 2009 23:43

thank you, and sorry for being a noob

Bilbo · Post by **Bilbo** » 28 Mar 2009 00:27

mad_railman wrote:ok now I have another question, what if the patch finds conflicting lines in the script (I can only do a little HTML and CSS nothing else so I dont know what the problem is) the patches that im trying to install are Bilbo's Extra large map patch and his Max Hight Modification patch

Then you're out of luck. My "height modification patch" is incomplete and even if you somehow manage to apply it, you won't get functional game.

For more height levels go to http://www.tt-forums.net/viewtopic.php?f=33&t=40844 and use the patch from there. Unlike my unfinished patch it is working and perhaps it would work. If not, drop here a line and I may look at it.

Hmm ... I think I rather remove link to my unfinished "Max Hight Modification patch" from my signature, as it is kinda obsolete ....

belugas · Post by **belugas** » 28 Mar 2009 02:08

mad_railman wrote:thank you, and sorry for being a noob

You do not have to excuse yourself for being new at something

This is totally normal.
What is less acceptable is to stay one. But i'm pretty sure it will not be your case

pecX · Post by **pecX** » 06 Apr 2009 08:12

Hi!

i downloadet the source via TourtoiseSVN. Its revision 15962.
Now i´d like to install a daylength patch http://www.tt-forums.net/viewtopic.php?f=33&t=42432

After i did what meusH wrote at the beginning of this thread, i dont know how to play the game with the patch.
Patch has revision 15961.

I did all from meusH`s post. Installed SVN. created folder then Downloadet source. then "add patch". Chosed the .patch file and clicket "patch all". Then SVN did some changes in the source (i think), but i dont know what to do now! How do i link the source with my OTTD 0.7.0? ingame i cant see the daylength options....

please help

Conditional Zenith · Post by **Conditional Zenith** » 06 Apr 2009 08:23

You need to compile the game. There are instructions on the wiki.

Melfice · Post by **Melfice** » 28 Apr 2009 23:05

I can seem to get BuildOpenTTD to work.
It doesn't seem to want to connect to the server for the source code?

Here's the exact error message I get:

The remote server returned an error (404) Not Found

Right after that, I get this one:

Value cannot be null. Parameter name: items

EDIT: Y'know what?
Never mind. I see after a bit of searching that this is a known problem without a fix right now.
I'll leave the compiling to you guys. You're better at it anyway.

ChillCore · Post by **ChillCore** » 28 Apr 2009 23:20

Don't give up so fast. there are many other compilers.
As long as we dont have to call the Whambulance people will help you if you get stuck. After trying and continuing to tell what went wrong.

Melfice · Post by **Melfice** » 29 Apr 2009 09:27

ChillCore wrote:Don't give up so fast. there are many other compilers.
As long as we dont have to call the Whambulance people will help you if you get stuck. After trying and continuing to tell what went wrong.

Maybe I'll give it another try in the morning, following the FAQ on the OpenTTD wiki, but honestly... I'm not really that tech-savvy, so I'm happy enough when I get compilations made by others working for myself.

I'll try something else tomorrow then and see how it goes.

EDIT: Also, I can see where the Whambulance-thing comes from, but I'm not giving up on frustration.
More... knowing my limits, satisfaction with what I've got anyway... and maybe just a milligram of frustration, I'll admit.

EDIT: Actually, no. It's too complicated for me, and it's only eyecandy I'm trying to add anyway. All I need, I've already got.

EDIT AGAIN: Curiousity got the better of me.
So, I've now compiled the trunk, it seems, in MinGW.
How do I make it so, that whatever patch I cobbled together gets compiled with the trunk?
Do I need to place the files I made with tortoiseSVN into a folder, or do I need to run a command-line in MinGW?

ChillCore · Post by **ChillCore** » 29 Apr 2009 10:19

Now you paste the patchfile,(.patch or .diff) in your "trunk"folder.
Rightclick select apply patch.
Solve conflicts if any.
Save.
Recompile.
Start exe.

If you are into making patches yourself:

Adjust source manually.
Save.
Recompile.

ps:
Glad you have taken the whambulance in a good way.
Everybody gets frustrated at some point.
No matter who you are or how much experience you have.
My best suggestion is then:
Do something else for a while but do get back at it.
There is no substitute for
YEAH, I DID IT !!!!

Transport Tycoon Forums

Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Re: Howto apply a patch/diff file

Who is online