[OTTD] OpenGFX+ Airports

Discuss, get help with, or post new graphics for TTDPatch and OpenTTD, using the NewGRF system, here. Graphics for plain TTD also acceptable here.

Moderator: Graphics Moderators

Post Reply
User avatar
planetmaker
OpenTTD Developer
OpenTTD Developer
Posts: 9432
Joined: 07 Nov 2007 22:44
Location: Sol d

Re: [OTTD] OpenGFX+ Airports

Post by planetmaker »

ISA wrote:
Yexo wrote:I'll code them if someone provides the graphics :)
I had/have some ideas, but before I've to finish 2 or 3 drawings!
Graphics would be very welcome. And I'll subscribe to coding them into this set, too.
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

Would a simple 1x1 helipad be possible? Something like this:
Attachments
1x1helipad.png
1x1helipad.png (1.33 KiB) Viewed 5612 times
User avatar
planetmaker
OpenTTD Developer
OpenTTD Developer
Posts: 9432
Joined: 07 Nov 2007 22:44
Location: Sol d

Re: [OTTD] OpenGFX+ Airports

Post by planetmaker »

PaulC wrote:Would a simple 1x1 helipad be possible? Something like this:
Not entirely sure... the existing 1x1 helipad is a building and we might not be able to change the landing altitude.

EDIT: yes, as feared:
Attachments
heliport.png
heliport.png (67.6 KiB) Viewed 5601 times
heliport2.diff
diff
(5.24 KiB) Downloaded 124 times
ogfx-airports-r154M.zip
grf
(263.94 KiB) Downloaded 145 times
Hirundo
Transport Coordinator
Transport Coordinator
Posts: 298
Joined: 27 Jan 2008 13:02

Re: [OTTD] OpenGFX+ Airports

Post by Hirundo »

planetmaker wrote:
PaulC wrote:Would a simple 1x1 helipad be possible? Something like this:
Not entirely sure... the existing 1x1 helipad is a building and we might not be able to change the landing altitude.

EDIT: yes, as feared:
You could add a (possibly animated) rope ladder to the helicopter, so people could climb into and out of the hovering heli.
Such a ladder would have to be added to the vehicle, and then applied if the ogfx+ airports grfid is detected.

TMWFTLB, though :D
Create your own NewGRF? Check out this tutorial!
User avatar
planetmaker
OpenTTD Developer
OpenTTD Developer
Posts: 9432
Joined: 07 Nov 2007 22:44
Location: Sol d

Re: [OTTD] OpenGFX+ Airports

Post by planetmaker »

Well... but might be worth a try in a similar way: The landing altitude is known, thus it need not be attached to the vehicle. The tile could use a conditional building using the tile animation triggers ANIM_TRIGGER_APT_NEW_CARGO and ANIM_TRIGGER_APT_CARGO_TAKEN to display a rope ladder or not...

I faintly remember there being a possible timing offset, but as said: it will just need a try.
frosch
OpenTTD Developer
OpenTTD Developer
Posts: 988
Joined: 20 Dec 2006 13:31
Location: Aschaffenburg

Re: [OTTD] OpenGFX+ Airports

Post by frosch »

Well, but... the rotor stops after "landing" ...
⢇⡸⢸⠢⡇⡇⢎⡁⢎⡱⢸⡱⢸⣭⠀⢸⢜⢸⢸⣀⢸⣀⢸⣭⢸⡱⠀⢰⠭⡆⣫⠰⣉⢸⢸⠀⢰⠭⡆⡯⡆⢹⠁⠀⢐⠰⡁
Hirundo
Transport Coordinator
Transport Coordinator
Posts: 298
Joined: 27 Jan 2008 13:02

Re: [OTTD] OpenGFX+ Airports

Post by Hirundo »

I suggest we consider this a motivation to get newgrf airports fully merged with trunk (after 1.2 is branched, that is)
Create your own NewGRF? Check out this tutorial!
Yexo
Tycoon
Tycoon
Posts: 3663
Joined: 20 Dec 2007 12:49

Re: [OTTD] OpenGFX+ Airports

Post by Yexo »

Hirundo wrote:I suggest we consider this a motivation to get newgrf airports fully mergedrewritten with trunk (after 1.2 is branched, that is)
There is nothing to merge currently.
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

Emperor Jake wrote:Having an old and modern style small airport might also be good - I like to use the small airport sometimes even in modern times where traffic is low and space is limited, and the dirt runway doesn't look good with modern turboprops.
Mock-up:
Attachments
small_airport_modern_style.png
small_airport_modern_style.png (5.16 KiB) Viewed 5261 times
User avatar
planetmaker
OpenTTD Developer
OpenTTD Developer
Posts: 9432
Joined: 07 Nov 2007 22:44
Location: Sol d

Re: [OTTD] OpenGFX+ Airports

Post by planetmaker »

PaulC wrote:Mock-up:(...)
Hm, I think that's a nice idea indeed :-)
And even w/o new sprites :-P
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

planetmaker wrote:And even w/o new sprites :-P
Actually that airport would require 6 new sprites (x4 for rotations). :wink:
Yexo
Tycoon
Tycoon
Posts: 3663
Joined: 20 Dec 2007 12:49

Re: [OTTD] OpenGFX+ Airports

Post by Yexo »

PaulC wrote:
planetmaker wrote:And even w/o new sprites :-P
Actually that airport would require 6 new sprites (x4 for rotations). :wink:
Which sprites are new?
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

Yexo wrote:Which sprites are new?
These:
Attachments
airport_sprites.png
airport_sprites.png (3.58 KiB) Viewed 5200 times
User avatar
Leanden
Tycoon
Tycoon
Posts: 2613
Joined: 19 Mar 2009 19:25
Location: Kent

Re: [OTTD] OpenGFX+ Airports

Post by Leanden »

Iirc, airports arent built that way. They are made up by layering other sprites.
Image
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

I don't believe that's any different to how the normal small airport is put together. But of course, I can cut those sprites any way that's needed.
User avatar
kamnet
Moderator
Moderator
Posts: 8548
Joined: 28 Sep 2009 17:15
Location: Eastern KY
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by kamnet »

PaulC wrote:
Emperor Jake wrote:Having an old and modern style small airport might also be good - I like to use the small airport sometimes even in modern times where traffic is low and space is limited, and the dirt runway doesn't look good with modern turboprops.
Mock-up: Image


YES! MAKE IT SO! </Picard>
Yexo
Tycoon
Tycoon
Posts: 3663
Joined: 20 Dec 2007 12:49

Re: [OTTD] OpenGFX+ Airports

Post by Yexo »

PaulC: Ah, of course. I missed the fact there are two buildings split over 3 tiles width. The sprites need to be cut per tile indeed. If you could cut the sprites I'll be happy to code this airport, it looks really cool :)
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

Yexo wrote:PaulC: Ah, of course. I missed the fact there are two buildings split over 3 tiles width. The sprites need to be cut per tile indeed. If you could cut the sprites I'll be happy to code this airport, it looks really cool :)
Do you mean they need to be cut differently to what I posted above? Or just that you need me to cut the sprites for the other rotations (and snow)?
Yexo
Tycoon
Tycoon
Posts: 3663
Joined: 20 Dec 2007 12:49

Re: [OTTD] OpenGFX+ Airports

Post by Yexo »

PaulC wrote:Or just that you need me to cut the sprites for the other rotations (and snow)?
That :)
User avatar
PaulC
Director
Director
Posts: 616
Joined: 31 Jul 2006 12:40
Location: Lancs, England
Contact:

Re: [OTTD] OpenGFX+ Airports

Post by PaulC »

small_modern_rotations.png
small_modern_rotations.png (17.47 KiB) Viewed 4924 times
A full set of sprites is now on DevZone. 8)
Post Reply

Return to “Graphics Development”

Who is online

Users browsing this forum: No registered users and 25 guests